SAHARA INTERNATIONAL

Panangad, Ernakulam, Kerala

EXTERIOR 10 YEARS PVDF QUALITY

PVDF 10 YEAR QUALITY PANELS

Masking Tape (ABRO 5123) consists of crepe paper, coated with rubber based pressure-sensitive adhesive capable of withstanding bake temperature up to 80 degree C for one hour and/or exposure to ultra-violet (UV) light for up to 5 hours. Masking Tape offers consistent conformability and tensile strength for general purpose bundling, protecting and various industrial applications. Typical Applications :

• Interior paint masking
• Spray painting (air dry) autos, boats, etc.
• Boat manufacturing (fiberglass)
• Silk screening, mail rooms
• Marble manufacturing (man-made)
• Golf club shaft (build up)
• Carpet pad/pad splicing
• Freezer tape
• Light bundling, packaging, splicing & tabbing

Advantages :

• Conforms to virtually any surface
• Naturally colored
• Moisture resistant
• Offers excellent balance of quick stick, panel adhesion and holding properties
• Prevents penetration of paints and thinners
• Cured adhesive system
• Minimizes adhesive residue on paint surface
• Provides easy unwind with excellent conformability
• Precisely structured crepe backing provide excellent finish to paint lines

Construction :

• Backing Fine structured crepe paper
• Coating: Rubber based adhesive

Storage And Usage :Masking Tape should be kept in a dry, cool and dust free environment, away from direct sun light. Tape shall be used within 12 months from the date of shipment. Tapes shall be used on a clean, dry, dust & oil free surface. Proper workmanship shall be ensured for a wrinkle free application. All properties are approximate and are based on tests believed to be reliable and performed in conformance with recommended test methods. These values are presented for comparison purposes and do not represent a guarantee by the manufacturer. It is suggested that purchasers should test, prior to use, the suitability of this product for their particular application.

Sahara International has a wide range of Aluminium Channels to meet the requirements of both industrial and domestic customers. With an independent office for our Aluminium division, we are one of the key players in this segment in Kerala. The Aluminium Channels can be availed from us in standardized as well as customized sizes. We are a prominent name as Aluminium Channels Supplier and Exporter in (Kerala). Aluminium channels offered by sahara :

• Cladding section
• Glazing sections
• Showcase sections
• Kitchen lips sections
• Door verticals and down sections

Attributes Of Aluminium Channels

• Light weight
• Resistant to corrosion
• High strength
• Low density
• Flexibility

Applications

• Homes
• Shop-fronts
• Commercial buildings
• Construction industry

Aluminium ExtrusionExtrusion is a process used in manufacturing the parts of uniform cross-sections by squeezing the material through a high-pressure outlet. A die is used to give the desired shape to the extruded metal. While many metals are used for extrusion, aluminium is most widely used for the advantages it has. Aluminium is the most preferred metal to extrude, as it is very light in weight. Other metals like copper, brass and steel weigh as much as 3 times heavier that of aluminium. Aluminium extrusions give very strong parts with relatively low weight. Aluminium extrusion is extremely cost effective when compared with extrusion of other metals. It produces a complete unit or small parts that can be interlocked with other metal parts to form a complete structure. One can get aluminium extrusions in various forms and shapes comparatively easily than other metals and non-metals. Aluminium extrusions dies are easy and relatively inexpensive to install and maintain.

We are one of the leading Grounded Spices Suppliers and Exporters in (Kerala). The different varieties of Grounded Spices are dispatched from Kerala to various parts of India and abroad. Our spice division is in the name of Gupta trading company. The companys office is located at Mattanchery, which was the traditional location for spices trade in Kerala. With our large warehouse and extensive infrastructure, we make available the different types of Grounded Spices in bulk. We Provide The Following Varieties Of Spices:

• Black Pepper
• Cardamom
• Red Chill
• Turmeric Fingers
• Maces
• Shelled Nutmegs
• Dried Ginger

Masking Tape (ABRO 5123) consists of crepe paper, coated with rubber based pressure-sensitive adhesive capable of withstanding bake temperature up to 80 degree C for one hour andor exposure to ultra-violet (UV) light for up to 5 hours. Masking Tape offers consistent conformability and tensile strength for general purpose bundling, protecting and various industrial applications. Typical Applications :Interior paint maskingSpray painting (air dry) autos, boats, etc.Boat manufacturing (fiberglass)Silk screening, mail roomsMarble manufacturing (man-made)Golf club shaft (build up)Carpet padpad splicingFreezer tapeLight bundling, packaging, splicing & tabbing Advantages :Conforms to virtually any surfaceNaturally colored

We are a well-known name as Commercial Plywood Supplier and Exporter in (Kerala). We bring forth the best quality Commercial Plywood available in wide varieties of wood used for structural and finish construction. Commercial Plywood, which we trade in, is known for its versatility of uses. Commercial Plywood is high in demand and we provide this plywood to the clients as per their requirements. The phase used is D grade phase and are made of rubber woods. Thickness Available Are

• 18mm
• 12mm
• 8mm
• 6mm

Applications

• Furniture
• Stage decorations
• Packaging materials
• Wooden crates
• Wooden pallets
• Wooden boxes

Clients can avail Semi Hardwood Plywood from us. We are a well-known Semi Hardwood Plywood Supplier and Exporter in (Kerala). The Semi Hardwood Plywood, offered by us, is equivalent to hardwood the only difference is the phase used that is c and c+ grades and the bonding is of mixed jungle wood and rubber. Semi Hardwood Plywood can be used for commercial as well as individual purposes. The phases used are C and C+ Phases. The Semi Hardwood Plywood is made with mixture of rubber wood and jungle wood. Applications

• Cupboards
• Interiors
• Furniture
• Kitchens

Thickness Available Are

• 18mm
• 12mm
• 9mm
• 6mm

We have acquired prominence as Film Faced Plywood Supplier and Exporter in (Kerala). We treat this particular plywood from waterproof paint. Treating the Film Faced Plywoods edges with waterproof paint makes it highly water-and wear-resistant. Due to its durability and easily handled surface it can be used in open environment in construction and building e.g. warehouses, railway wagons, floors and sidewalls of trucks etc. Coating the Film Faced Plywood with high-quality import films ensures hardness and damage resistance. The surface of the film faced plywood is hygienic and resistant to strong detergents, which is important for farming constructions and storage of food products. Attributes Of Film Faced Plywood

• Lightweight
• Resistant to
• Corrosion
• Termite attack
• Water
• Can easily be combined with other materials
• Easy to clean and cut

Film Faced Plywood Can Be Used In

• Conditions of high temperature drop
• Influence of moisture
• Detergent cleaning

Note : The thickness available is mainly 12mm of weight 24 kgs and 30 kgs