Ridge ventilators are ventilators that are installed at the peak of a roof, allowing warm, humid air to escape the building. They provide evenly distributed ventilation along the entire underside of the roof of a building.
Safintra Roofing provides Ridge Ventilators designed specifically to meet the architectural requirements of modern industrial designs. The design of the ridge ventilator is compatible with the Safzip standing seam and Saflok 700 roofing systems provided by Safintra Roofing. The ridge ventilators render an easy fit on the roof without causing any damage to it. Especially design Soaker plate of higher thickness is used for installation of Ridge ventilators. They can be used on industrial warehouses, industrial plants, factory sheds, and any other large industrial buildings.
The ridge ventilators can be made either from 0.50 mm TCT Pre-Painted Galvalume material with AZ150 coating, or 0.50 mm TCT Pre Painted Galvanized material with Z120 coating or bare material 0.47mm TCT with AZ 150 coating, as per the requirement of the consumer.
Advantages of Safintra Ventilators:-- They are covered with a bird mesh, to restrict the entry of birds in the ventilator.- They are assembled to provide a leak proof ventilation solution. - They enable easy installation on the roof.

Louvres with horizontal slats are angled to admit light and air into the building. They help to keep out rain, direct sunshine, and noise. The standard dimensions of the Louvres produced by Safintra Roofing are 2.5 x 1.2 meters and are made from either 0.50 mm Pre Painted Galvalume with AZ150 coating, or 0.50 mm Pre Painted Galvanised Iron with Z120 coating. The Louvres can be custom made to the clients specification in different sizes and shapes as well.
Advantages of Safintra Louvres:-
1] Incorporate 5-10 mm Hemming to increase the strength of the product2] Louvre fixing is done with Standard Method using Aluminium Rivets and screw fixing (GI screw).3] Provided in any standard colour as per requirement of the customer.

Smartroof is a range of Roofing and Wall cladding products from Safintra Roofing India Ltd. Smartroof Steel sheets are manufactured to International Quality Standards for roofing and cladding in Industrial and Residential buildings. It provides the highest amount of coating on the roofing sheets in comparison to others in the industry. One can have 150 GSM Aluminium Zinc coated roof and 120 GSM Zinc coated roof. Smartroof Products are produced and supplied by Safintra Roofing (India) Ltd, the leader in Metal Roofing Solutions for large Industrial and Residential projects in India. Safintra associates with a large distributors network to provide Smartroof roofing solution in Western part of India. Smartroof comprises of two different profiles Smartroof Box profile and Smartroof Tile shaped profile
Smartroof Box ProfileThe long flute gives the Smartroof Box profile its strength along with long spanning capabilities. It can be used as roofing as well as cladding profile. The general shape and appearance of the square flutes ensures that it is suitable for use as both roof and wall cladding. The square flutes of this type sheet ensure excellent drainage characteristics. The long flutes provide an aesthetically pleasing look. This type of roof can be factory cranked, curved and bullnosed to a wide range of radii.
Smartroof Tile Shaped ProfileSmartroofs Tile shaped Roof is a premium range roofing profile that give the look of tiles. It is available in Pre-painted Galvanised Steel, Pre-painted Aluminium-Zinc Coated Steel, with long life unmatched by other Tile Profiles. All this provide a classy, lightweight, durable and beautiful Roofing product that is ideal for the most discerning user.

S5 clamps and brackets are a unique solution for easy attachment of any external element to the roof without damaging the external area of the roof. These innovative products avoid leakages and ensure the life of the roof is not compromised. S5 clamps are engineered for attaching all kinds of rooftop accessories: Solar Panels, signs, walkways, satellite dishes, antennas, rooftop lighting, and lightning protection systems, mechanical equipment etc. S5 clamps allow for the installation of accessories such as solar panels without needing to perforate the metal roof thus preserving the sheet warranty.
Safintra Roofing provides specific clamps to suit each of our roofing profiles.
S-5-K Grip Mini Clamp is suitable for our clip lock Saflok 700 profile -:S5 clamps are non-penetrating clamps for concealed fix systems. The clamps attach to the roof panel by tightening of bullet nosed setscrews against the seam.Inserts used for the profile allows a tight fit and provides increased holding strength for the profile. Compatible with aluminium zinc coated steelS5 clamps are made from High tensile aluminium and non-ferrous stainless steel hardwareS5 clamps also improve wind uplift performance and can double wind resistance at a minimal cost
S5 Z mini clamps are designed for our standing seam Safzip profile -:The S-5-Z Mini is a medium-duty non-penetrating seam clamp that is compatible with our Safzip profileIts design allows it to be easily installed anywhere along the length of the ribThe patented setscrews slightly dimple the metal seam material leaving puncture-less roof Compatible with most common metal roofing materials excluding copper.
S5 Protea brackets are designed to work with Versatile and Comax 1000 roofing sheets -:Protea brackets have an adjustable attachment base to accommodate varying width and height of the roofing profileThe bracket comes with factory applied, adhesive rubber sealant thus ensuring quick installation and weather proof fit.
S5 Trap brackets are designed to work with Trimflute Roofing Sheet -:The Trap Bracket comes with a factory applied EPDM rubber gasket seal already on the base, and the S-5 Patented reservoir conceals the EPDM from UV exposure, preventing drying and cracks.The Trap Bracket is mounted directly onto the crown of the panel, straddling the profileTrap Bracket attach almost anything to the exposed-fastener trapezoidal roof profiles.No messy sealants to apply on the Trap bracket, the factory-applied EPDM rubber gasket weather-proofs and makes installation easy.It can be used for almost any attachment.

Versatile is a premium range roofing profile from Safintra that gives the look of tiles. It is available in Pre-painted Zinc Coated Steel, Prepainted Aluminium-Zinc Coated Steel or Pre-Painted Aluminium sheets, with long life unmatched by other Tile Profiles.
Versatile is also available with the option of the Polyvinyl Di-Fluoride (PVDF) paint system, provides roofing that has a 15 year fade free warranty.
All this goes to mark out Versatile as a classy, lightweight, durable and beautiful product that is ideal for the most discerning user.

Trimflute is a subtle square fluted profile sheet where the long flute gives the profile its strength with long spanning capabilities. Trimflute can be used as roofing as well as a wall cladding profile.The general shape and appearance of the square flutes ensure that Trimflute is totally acceptable to be used as roofing and wall cladding. The square flutes of Trimflute type sheeting ensure excellent drainage characteristics. The trendy look of Trimflute is widely accepted since it serves both the purpose of strength as well as aesthetics. Trimflute can be factory cranked, curve and bull nosed to a wild range of radii. For further details contact our Technical Department.

Safzip Self Supported conceal halter standing seam roofing system. Safzip offers a perfect system solution with limitless design potential, state of the art production technology, ultimate product quality, innovative material combination and harmonious integration of shape, colors and surfaces. Safzip is an advanced zip-up` standing seam system that creates a continuous weather tight roof. The side laps are zipped up` in conjunction with a unique halter system that is fixed directly to the supporting structure without penetrating the external weather sheet. This method of secret fixing creates a structurally sound roof construction that provides excellent resistance to wind uplift.Renowned for its outstanding aesthetic properties and performance characteristics, standing seam roofing systems offer the specifier contractor a cost-effective construction solution with numerous benefits.Safzip can be manufactured on-site which allows roofs to be constructed using very long sheet lengths. This eliminates the need for any end laps and considerably increases the speed of construction.Offering the ultimate in design flexibility, Safzip is available in Aluminum, Galvanized, Galvalume and can be smooth, crimped or concave curved; tapered or wave formed.With potential changes to the Building Regulations / Technical Standards, Safzip standing seam systems easily comply with the stringent performance standards proposed over the

Saflok 700 is an angular interlocking standing seam trapezoidal rib profile roofing sheet, with roll formed on our stationary and mobile mills from our various material Specification options. Saflok 700 is an angular interlocking trapezoidal rib profile with a net cover width of 700 mm.

Saflok 700 has a unique clipping system, which combines both strength and agility to enable the material to expand and contract under normal circumstances with no damage to the material. The bends on the clip allows flexibility whilst still providing sheer strength. The clip allows positive interlocking on all flutes and interlock with each other allowing easy alignment of the material.
The fully interlocking Saflok 700 clip is to incorporate two anchors to clasp the two inner ribs and a dual action component to positively hold down the male-female joint. For any further specifications please contact our technical department.

Saflok 700 is an angular interlocking standing seam trapezoidal rib profile roofing sheet, with roll formed on our stationary and mobile mills from our various material specification options.

Comax 1000 is an angular trapezoidal fluted roofing sheet. Its bold appearance makes it both attractive and practical. It has become the most popular sheeting used in the construction of commercial and industrial buildings. The number "1000" signifies the sheets effective cover width. The general shape and appearance of the trapezoidal flutes ensure that comax 1000 is totally acceptable for use as roof and wall cladding. The deep and broad flutes of comax 1000 type sheeting ensure excellent drainage characteristics.

We are an eminent and leading trader of flashing products

We are offering roofing products at very market leading prices company.

Louvres with horizontal slats are angled to admit light and air into the building. They help to keep out rain, direct sunshine, and noise. The standard dimensions of the louvres produced by safintra roofing are 2.5 x 1.2 meters and are made from either 0.50 mm pre painted galvalume with az150 coating, or 0.50 mm pre painted galvanised iron with z120 coating. The louvres can be custom made to the clients specification in different sizes and shapes as well.

we are offering S5 clamps and brackets are a unique solution for easy attachment of any external element to the roof without damaging the external area of the roof. These innovative products avoid leakages and ensure the life of the roof is not compromised. S5 clamps are engineered for attaching all kinds of rooftop accessories: solar panels, signs, walkways, satellite dishes, antennas, rooftop lighting, and lightning protection systems, mechanical equipment etc. S5 clamps allow for the installation of accessories such as solar panels without needing to perforate the metal roof thus preserving the sheet warranty.

Ridge ventilators are ventilators that are installed at the peak of a roof, allowing warm, humid air to escape the building. They provide evenly distributed ventilation along the entire underside of the roof of a building.
Safintra Roofing provides Ridge Ventilators designed specifically to meet the architectural requirements of modern industrial designs. The design of the ridge ventilator is compatible with the Safzip standing seam and Saflok 700 roofing systems provided by Safintra Roofing. The ridge ventilators render an easy fit on the roof without causing any damage to it. Especially design Soaker plate of higher thickness is used for installation of Ridge ventilators. They can be used on industrial warehouses, industrial plants, factory sheds, and any other large industrial buildings.
The ridge ventilators can be made either from 0.50 mm TCT Pre-Painted Galvalume material with AZ150 coating, or 0.50 mm TCT Pre Painted Galvanized material with Z120 coating or bare material 0.47mm TCT with AZ 150 coating, as per the requirement of the consumer.
Advantages of Safintra Ventilators:-- They are covered with a bird mesh, to restrict the entry of birds in the ventilator.- They are assembled to provide a leak proof ventilation solution. - They enable easy installation on the roof.

Louvres with horizontal slats are angled to admit light and air into the building. They help to keep out rain, direct sunshine, and noise. The standard dimensions of the Louvres produced by Safintra Roofing are 2.5 x 1.2 meters and are made from either 0.50 mm Pre Painted Galvalume with AZ150 coating, or 0.50 mm Pre Painted Galvanised Iron with Z120 coating. The Louvres can be custom made to the clients specification in different sizes and shapes as well.
Advantages of Safintra Louvres:-
1] Incorporate 5-10 mm Hemming to increase the strength of the product2] Louvre fixing is done with Standard Method using Aluminium Rivets and screw fixing (GI screw).3] Provided in any standard colour as per requirement of the customer.

Smartroof is a range of Roofing and Wall cladding products from Safintra Roofing India Ltd. Smartroof Steel sheets are manufactured to International Quality Standards for roofing and cladding in Industrial and Residential buildings. It provides the highest amount of coating on the roofing sheets in comparison to others in the industry. One can have 150 GSM Aluminium Zinc coated roof and 120 GSM Zinc coated roof. Smartroof Products are produced and supplied by Safintra Roofing (India) Ltd, the leader in Metal Roofing Solutions for large Industrial and Residential projects in India. Safintra associates with a large distributors network to provide Smartroof roofing solution in Western part of India. Smartroof comprises of two different profiles Smartroof Box profile and Smartroof Tile shaped profile
Smartroof Box ProfileThe long flute gives the Smartroof Box profile its strength along with long spanning capabilities. It can be used as roofing as well as cladding profile. The general shape and appearance of the square flutes ensures that it is suitable for use as both roof and wall cladding. The square flutes of this type sheet ensure excellent drainage characteristics. The long flutes provide an aesthetically pleasing look. This type of roof can be factory cranked, curved and bullnosed to a wide range of radii.
Smartroof Tile Shaped ProfileSmartroofs Tile shaped Roof is a premium range roofing profile that give the look of tiles. It is available in Pre-painted Galvanised Steel, Pre-painted Aluminium-Zinc Coated Steel, with long life unmatched by other Tile Profiles. All this provide a classy, lightweight, durable and beautiful Roofing product that is ideal for the most discerning user.

S5 clamps and brackets are a unique solution for easy attachment of any external element to the roof without damaging the external area of the roof. These innovative products avoid leakages and ensure the life of the roof is not compromised. S5 clamps are engineered for attaching all kinds of rooftop accessories: Solar Panels, signs, walkways, satellite dishes, antennas, rooftop lighting, and lightning protection systems, mechanical equipment etc. S5 clamps allow for the installation of accessories such as solar panels without needing to perforate the metal roof thus preserving the sheet warranty.
Safintra Roofing provides specific clamps to suit each of our roofing profiles.
S-5-K Grip Mini Clamp is suitable for our clip lock Saflok 700 profile -:S5 clamps are non-penetrating clamps for concealed fix systems. The clamps attach to the roof panel by tightening of bullet nosed setscrews against the seam.Inserts used for the profile allows a tight fit and provides increased holding strength for the profile. Compatible with aluminium zinc coated steelS5 clamps are made from High tensile aluminium and non-ferrous stainless steel hardwareS5 clamps also improve wind uplift performance and can double wind resistance at a minimal cost
S5 Z mini clamps are designed for our standing seam Safzip profile -:The S-5-Z Mini is a medium-duty non-penetrating seam clamp that is compatible with our Safzip profileIts design allows it to be easily installed anywhere along the length of the ribThe patented setscrews slightly dimple the metal seam material leaving puncture-less roof Compatible with most common metal roofing materials excluding copper.
S5 Protea brackets are designed to work with Versatile and Comax 1000 roofing sheets -:Protea brackets have an adjustable attachment base to accommodate varying width and height of the roofing profileThe bracket comes with factory applied, adhesive rubber sealant thus ensuring quick installation and weather proof fit.
S5 Trap brackets are designed to work with Trimflute Roofing Sheet -:The Trap Bracket comes with a factory applied EPDM rubber gasket seal already on the base, and the S-5 Patented reservoir conceals the EPDM from UV exposure, preventing drying and cracks.The Trap Bracket is mounted directly onto the crown of the panel, straddling the profileTrap Bracket attach almost anything to the exposed-fastener trapezoidal roof profiles.No messy sealants to apply on the Trap bracket, the factory-applied EPDM rubber gasket weather-proofs and makes installation easy.It can be used for almost any attachment.

Versatile is a premium range roofing profile from Safintra that gives the look of tiles. It is available in Pre-painted Zinc Coated Steel, Prepainted Aluminium-Zinc Coated Steel or Pre-Painted Aluminium sheets, with long life unmatched by other Tile Profiles.
Versatile is also available with the option of the Polyvinyl Di-Fluoride (PVDF) paint system, provides roofing that has a 15 year fade free warranty.
All this goes to mark out Versatile as a classy, lightweight, durable and beautiful product that is ideal for the most discerning user.

Trimflute is a subtle square fluted profile sheet where the long flute gives the profile its strength with long spanning capabilities. Trimflute can be used as roofing as well as a wall cladding profile.The general shape and appearance of the square flutes ensure that Trimflute is totally acceptable to be used as roofing and wall cladding. The square flutes of Trimflute type sheeting ensure excellent drainage characteristics. The trendy look of Trimflute is widely accepted since it serves both the purpose of strength as well as aesthetics. Trimflute can be factory cranked, curve and bull nosed to a wild range of radii. For further details contact our Technical Department.

Safzip Self Supported conceal halter standing seam roofing system. Safzip offers a perfect system solution with limitless design potential, state of the art production technology, ultimate product quality, innovative material combination and harmonious integration of shape, colors and surfaces. Safzip is an advanced zip-up` standing seam system that creates a continuous weather tight roof. The side laps are zipped up` in conjunction with a unique halter system that is fixed directly to the supporting structure without penetrating the external weather sheet. This method of secret fixing creates a structurally sound roof construction that provides excellent resistance to wind uplift.Renowned for its outstanding aesthetic properties and performance characteristics, standing seam roofing systems offer the specifier contractor a cost-effective construction solution with numerous benefits.Safzip can be manufactured on-site which allows roofs to be constructed using very long sheet lengths. This eliminates the need for any end laps and considerably increases the speed of construction.Offering the ultimate in design flexibility, Safzip is available in Aluminum, Galvanized, Galvalume and can be smooth, crimped or concave curved; tapered or wave formed.With potential changes to the Building Regulations / Technical Standards, Safzip standing seam systems easily comply with the stringent performance standards proposed over the

Saflok 700 is an angular interlocking standing seam trapezoidal rib profile roofing sheet, with roll formed on our stationary and mobile mills from our various material Specification options. Saflok 700 is an angular interlocking trapezoidal rib profile with a net cover width of 700 mm.

Saflok 700 has a unique clipping system, which combines both strength and agility to enable the material to expand and contract under normal circumstances with no damage to the material. The bends on the clip allows flexibility whilst still providing sheer strength. The clip allows positive interlocking on all flutes and interlock with each other allowing easy alignment of the material.
The fully interlocking Saflok 700 clip is to incorporate two anchors to clasp the two inner ribs and a dual action component to positively hold down the male-female joint. For any further specifications please contact our technical department.

Saflok 700 is an angular interlocking standing seam trapezoidal rib profile roofing sheet, with roll formed on our stationary and mobile mills from our various material specification options.

Comax 1000 is an angular trapezoidal fluted roofing sheet. Its bold appearance makes it both attractive and practical. It has become the most popular sheeting used in the construction of commercial and industrial buildings. The number "1000" signifies the sheets effective cover width. The general shape and appearance of the trapezoidal flutes ensure that comax 1000 is totally acceptable for use as roof and wall cladding. The deep and broad flutes of comax 1000 type sheeting ensure excellent drainage characteristics.

We are an eminent and leading trader of flashing products

We are offering roofing products at very market leading prices company.

Louvres with horizontal slats are angled to admit light and air into the building. They help to keep out rain, direct sunshine, and noise. The standard dimensions of the louvres produced by safintra roofing are 2.5 x 1.2 meters and are made from either 0.50 mm pre painted galvalume with az150 coating, or 0.50 mm pre painted galvanised iron with z120 coating. The louvres can be custom made to the clients specification in different sizes and shapes as well.

we are offering S5 clamps and brackets are a unique solution for easy attachment of any external element to the roof without damaging the external area of the roof. These innovative products avoid leakages and ensure the life of the roof is not compromised. S5 clamps are engineered for attaching all kinds of rooftop accessories: solar panels, signs, walkways, satellite dishes, antennas, rooftop lighting, and lightning protection systems, mechanical equipment etc. S5 clamps allow for the installation of accessories such as solar panels without needing to perforate the metal roof thus preserving the sheet warranty.