Kochi, Kerala, India
Verified
Add Review
Our Products
A conventional system employs one or more initiating circuits, connected to sensors (initiating devices) wired in parallel. These sensors are devised to decrease the circuits resistance when the environmental influence on any sensor exceeds a predetermined threshold. In a conventional system the information density is limited to the number of such circuits used. At times, a floor plan of the building is often placed near the main entrance with the defined zones drawn up, and LEDs indicating whether a particular circuit/zone has been activated. Another common method is to have the different zones listed in a column, with an LED to the left of each zone name.
FIRE ALARM CONTROL PANELS
Conventional fire alarm system is cost-effective and adaptable to a variety of applications, big or small making it one of the most flexible products on the market.
MANUAL CALL POINTS MS/ABS TYPES
This device is provided to enable manual operation of the fire alarm system ie Where you discover fire/smoke and the fire alarm is not sounding.
All visible surfaces (except for the frangible elements) of the Manual Call Point shall be red.
They are usually located in corridors and at the Fire Indicator Panel.
HOOTER MS/ABS TYPES
Hooters / Sounders are very important part of the Fire Detection & Alarm system. It will alert the people and help to take necessary steps to stop the Fire.
RESPONSE INDICATORS
Response Indicators commonly named as RI is remote indicator for smoke detectors. It is used commonly for the detectors installed closed rooms / cabins, above False ceiling.
RI gets activate and glow steady red LED, when the detector connected with RI get activate. Activation of RI is associated with the smoke detector and provide only visual indication.
FIRE BUS
WIRELESS FIRE ALARM SYSTEMS
NO wiring and conducting works on radio waves
Each detector works as a independently unit. So in case of non working of particular detector it does not have any effect on the system.
Zero maintenance and no AMC required.Immediate Installations. 200 no. of detectors with panel can be installed in a single day even when building is occupied.
Can be installed in running office complex / factory etc.
Complete flexibility. Any time there is a requirement for any modernization of the building. Any detector / panel can be shifted as per requirements.
A conventional system employs one or more initiating circuits, connected to sensors (initiating devices) wired in parallel. These sensors are devised to decrease the circuits resistance when the environmental influence on any sensor exceeds a predetermined threshold. In a conventional system the information density is limited to the number of such circuits used. At times, a floor plan of the building is often placed near the main entrance with the defined zones drawn up, and LEDs indicating whether a particular circuit/zone has been activated. Another common method is to have the different zones listed in a column, with an LED to the left of each zone name.
FIRE ALARM CONTROL PANELS
Conventional fire alarm system is cost-effective and adaptable to a variety of applications, big or small making it one of the most flexible products on the market.
MANUAL CALL POINTS MS/ABS TYPES
This device is provided to enable manual operation of the fire alarm system ie Where you discover fire/smoke and the fire alarm is not sounding.
All visible surfaces (except for the frangible elements) of the Manual Call Point shall be red.
They are usually located in corridors and at the Fire Indicator Panel.
HOOTER MS/ABS TYPES
Hooters / Sounders are very important part of the Fire Detection & Alarm system. It will alert the people and help to take necessary steps to stop the Fire.
RESPONSE INDICATORS
Response Indicators commonly named as RI is remote indicator for smoke detectors. It is used commonly for the detectors installed closed rooms / cabins, above False ceiling.
RI gets activate and glow steady red LED, when the detector connected with RI get activate. Activation of RI is associated with the smoke detector and provide only visual indication.
FIRE BUS
WIRELESS FIRE ALARM SYSTEMS
NO wiring and conducting works on radio waves
Each detector works as a independently unit. So in case of non working of particular detector it does not have any effect on the system.
Zero maintenance and no AMC required.Immediate Installations. 200 no. of detectors with panel can be installed in a single day even when building is occupied.
Can be installed in running office complex / factory etc. Complete flexibility. Any time there is a requirement for any modernization of the building. Any detector / panel can be shifted as per requirements.
Fire extinguishers with 5 and 10 year warranty, all BAFE approved, BS Kitemarked and CE marked. We also offer installation and servicing.Fire extinguishers with 5 and 10 year warranty, all BAFE approved, BS Kitemarked and CE marked. We also offer installation and servicing.Fire extinguishers with 5 and 10 year warranty, all BAFE approved, BS Kitemarked and CE marked. We also offer installation and servicing
Morley-IAS is one of the worlds leading designers and manufacturers of Fire Alarm Control Equipment and Systems. We supply our products to professional and qualified fire alarm installers who will design and install a complete system for a building as well as providing commissioning and maintenance support. To ensure that our equipment meets the demands of all our customers world-wide, Morley-IAS offers a flexible, extensive product range, offering many variants tuned precisely to our customers requirements, as you would expect from a world-leading manufacturer.
Founded in 1952, Fire-Lite was the first company to introduce addressable fire alarm systems to the market. Today, Fire-Lite is the leading manufacturer of low-to-mid sized fire alarm control communicators, remote power supplies, annunciators and voice evacuation products.
MORLEY IAS INTELLIGENT ADDRESSABLE CONTROL PANELS
DXc Control Panel
DXc1 One loop Fire Alarm Control Panel (Model : 714-001-112)Dxc2 Two loop Fire Alarm Control Panel (Model : 714-001-222)Dxc4 Four loop Fire Alarm Control Panel (Model : 714-001-242)
ZX Control Panels
Zx1se single loop control panel (Model : 722-001-301)Zx2se 1-2 loop control panel (Model : 720-001-301)Zx5se 1-5 loop control panel (Model : 721-001-301)
ZX- Internal Expansion Modules
Loop driver card for Morley-IAS protocol, 460mA.(Model : 795-072-100)
RS 485 Communication module.(Model : 795-004-001)
Internal Printer Module(Model : 795-051-001)
| Firelite MS-9600 636 Point System The Fire-Lite MS-9600LS and MS-9600UDLS are a compact, cost-effective, intelligent addressable fire alarm control panel with a capacity of 318 addressable Fire-Lite devices on one Signaling Line Circuit (SLC) or a total of 636 addressable points with an optional second loop (SLC-2LS). MS-9200 198 Point System The Fire-Lite MS-9200UDLS Rev 3, Version 5.0 Firmware is a compact addressable FACP (fire al) |
| Morley 1 This Morley Fire Analogue Addressable Control Panel range includes the Morley Dimension and Morley ZX range. The Morley Analogue Addressable Fire Alarm Panel range is a selection of EN54 and BS5839 compliant products. Morley DXc1 Control Panel Morley DXc1 Single Loop Analogue Addressable Control Panel Morley DXc2 Control Panel Morley DXc2 Two Loop Analogue A |
| Morley Morley IAS By choosing Morley IAS, you are assured of working with a company that has a well established reputation for quality products with first-class support. The wide range of products from Morley-IAS allows you the freedom to design the system that best suits your needs with the option to create, add, enhance whenever and however you wish. Our extensive network of trained installers and maintenance operatives gives end users the freedom |
