Geomembranes are impermeable sheets used in the containment and management of solids, liquids and gases. Common applications include storm cells, waste management, gas management, mining, water, waste water, ditch lining, agriculture, aquaculture and other industrial activities. Geomembranes are manufactured from HDPE, LDPE, and LLDPE, polypropylene, butyl rubber and reinforced polyethylene. Membrane performance is ultimately reliant on the quality of installation. SGPL offers a full installation service to ensure our products perform to the highest standards.

Polyester Geocomposite is a high strength geocomposite using the separation and filtration performance of a regular polyester, reinforced with high tenacity polyester yarns. These reinforcement fibers are permanently combined with the non-woven base by weft insertion knitting to provide a very strong multi-functional geosynthetics

Polyester Geocompositeis a high strength geocomposite using the separation and filtration performance of a regular polyester, reinforced with high tenacity polyester yarns. These reinforcement fibers are permanently combined with the non-woven base by weft insertion knitting to provide a very strong multi-functional geosynthetics

Geotextiles are permeablefabricswhich, when used in association withsoil, have the ability to separate, filter, reinforce, protect, or drain. Geotextiles are of two types Woven and Non-Woven Geotextiles. These products have a wide range of applications and are currently used to advantage in manycivil engineeringapplications including roads, airfields, railroads, embankments, retaining structures, reservoirs, canals, dams, bank protection and coastal engineering. Geotextiles four main functions are Filtration, Drainage, Separation and Reinforcement.

GEOCELLS are cellular confinement systems which are supplied in a collapsed form and which can be rapidly expanded at the site and filled with soil, aggregate or concrete for a wide range of applications:Erosion control, Slope protection and stabilization, Retaining structures, Facing of reinforced soil walls and slopes, Subgrade stabilization, Track-bed stabilization, Canal lining, Reservoir lining

Bi-axial Geogrids are square meshes of polypropylene (PP) and widely used as subsoil reinforcement. Their prominent characteristic is excellent mechanical properties under intermittent high loading. As a bi-axial mesh strength is equal in both machine and cross direction. As Granular materials are compacted into the apertures of the ID an interlocking effect is achieved. The stiffness of Geogrid allows for load at low strain. Ultimately highway design relies on economic solutions which Geogrid provides, allowing an estimated 40% reduction in granular materials with no less of performance.

Geomembranes are impermeable sheets used in the containment and management of solids, liquids and gases. Common applications include storm cells, waste management, gas management, mining, water, waste water, ditch lining, agriculture, aquaculture and other industrial activities. Geomembranes are manufactured from HDPE, LDPE, and LLDPE, polypropylene, butyl rubber and reinforced polyethylene. Membrane performance is ultimately reliant on the quality of installation. SGPL offers a full installation service to ensure our products perform to the highest standards.

Polyester Geocomposite is a high strength geocomposite using the separation and filtration performance of a regular polyester, reinforced with high tenacity polyester yarns. These reinforcement fibers are permanently combined with the non-woven base by weft insertion knitting to provide a very strong multi-functional geosynthetics

Polyester Geocompositeis a high strength geocomposite using the separation and filtration performance of a regular polyester, reinforced with high tenacity polyester yarns. These reinforcement fibers are permanently combined with the non-woven base by weft insertion knitting to provide a very strong multi-functional geosynthetics

Geotextiles are permeablefabricswhich, when used in association withsoil, have the ability to separate, filter, reinforce, protect, or drain. Geotextiles are of two types Woven and Non-Woven Geotextiles. These products have a wide range of applications and are currently used to advantage in manycivil engineeringapplications including roads, airfields, railroads, embankments, retaining structures, reservoirs, canals, dams, bank protection and coastal engineering. Geotextiles four main functions are Filtration, Drainage, Separation and Reinforcement.

GEOCELLS are cellular confinement systems which are supplied in a collapsed form and which can be rapidly expanded at the site and filled with soil, aggregate or concrete for a wide range of applications:Erosion control, Slope protection and stabilization, Retaining structures, Facing of reinforced soil walls and slopes, Subgrade stabilization, Track-bed stabilization, Canal lining, Reservoir lining

Bi-axial Geogrids are square meshes of polypropylene (PP) and widely used as subsoil reinforcement. Their prominent characteristic is excellent mechanical properties under intermittent high loading. As a bi-axial mesh strength is equal in both machine and cross direction. As Granular materials are compacted into the apertures of the ID an interlocking effect is achieved. The stiffness of Geogrid allows for load at low strain. Ultimately highway design relies on economic solutions which Geogrid provides, allowing an estimated 40% reduction in granular materials with no less of performance.