It is a polymer modified cementitious wate proofing system with a wide scope of applications in cement primers, Crack filling, Damp Proofing, Water Proofing and corrosion inhibition situations. It is a single component material when mixed with cement; it forms a flexible reinforced membrane on curing. 

APPLICATIONS/ ADVANTAGES: 

• Excellent Water impermeability. 
• High Tensile Strength. Cementitious waterproofing, Bonding Agent. 
• Good Bonding and adhesion to substrates like concrete, brick and metal. 
• For Basement Waterproofing, Bathrooms, Walls, Water tanks, Swimming pools, chajjas, Sunken Area's, Terrace, Sloping Roofs, Plastered surfaces, Sumps and Lift pits etc. 

It is composed of acrylic co-polymer emulsions and additives. It is an acrylic emulsion cement modifier and is used as a bonding agent for new to old cementations substrates. When mixed with cement, it forms a matrix and provides an excellent waterproof coating 

APPLICATIONS : For water proofing of Bathrooms/Terrace/ Water tanks/Sumps/Sunken slabs/ Lift Pits, Basements etc. 

It is polymer modified Grout Admixture which enhances the performance and bonding strength of Adhesives / Grouts.

It is a High Strength, Non-Shrink free flow Cementitious precision grout to withstand Static and dynamic loads for foundation. It is used for grouting of Machinery and Equipments. If consists of Portland cement, graded fillers and chemical additives which impart controlled expansion that require only addition of requisite water at site. It can also be used for anchoring a wide range of fixings like bolts, fence posts etc. 

It is a Acrylic polymer modified two component Cementitious water proofing system with a wide scope of applications in water proofing with high Elastomeric properties. It forms a flexible reinforced membrane on curing. 

APPLICATIONS:

Basement Waterproofing, Bathrooms, Walls, Water tanks, Swimming pools, chajjas, Sunken Area's, Terrace, Sloping Roofs, Plastered surfaces, Sumps and Lift pits etc. 

It is a three component solvent free low viscosity Epoxy resin mortar. It is Chemical, water resistant and Stain free. 

USES: It is recommended for use in the following industrial areas: Laboratories, clean rooms, Food Processing areas, Chemical/ Pharmaceutical, Drying rooms, Exhibition Halls etc.

It is a two component Solvent Free Epoxy modified Primer for Cement floor, concrete, VDF etc. USES: As a Primer for Epoxy based floor coating and self smoothening Topping. 

ADVANTAGES: Excellent adhesion to concrete, solvent free, high mechanical strength.

 It is polymer modified cementitious powder uses for Floor and Walls in both Interior and Exterior applications for fixing Tiles. It only needs addition of water before application.

It is a two component solvent free Epoxy Self level flooring system, which forms a tough, hard and joint less mirror like finish which is dust proof and easy to clean hygienic surface treatment available in different shades. 

USES:

It is recommended for use in the following industrial areas: Laboratories, clean rooms, Food Processing areas, Chemical/Pharmaceutical, Drying rooms, Exhibition Halls. 

ADVANTAGES:

Easy to apply, can be applied on fresh and as well as on old concrete, Excellent abrasion resistance, Excellent compressive strength.

It is a non shrink; non toxic polymer modified cementitious powder used for Floor and Walls in both interior and exterior applications for fixing Tile Joints. It contains good water resistance properties and High Bonding Strength. 

Applications: Interior / Exterior walls. + All types of ceramic, Porcelain, Granite, Marble etc. 

It is an integral waterproofing liquid for concrete, plaster, and mortar admixture. It is used to minimize permeability and increases waterproofing properties. It is based on refined ligno sulphonates. 

Uses

• It increases workability 
• Reduces Shrinkage. 
• To increase waterproofing properties of Concrete, Plastering and Mortar. 
• To increase compressive strength. 

Application

Roof slabs and screeds, Basements, External plastering, Bathroom floors, Water tanks, sumps, drains, Bathrooms wash areas, Foundations & Columns.

It is a Quick Setting Compound. It comprises o Cement, graded sand and chemical setting control agents and needs only required amount of water to be added before using. 

USES:

It is used to stop leaks from basements, sumps, water tanks as it contains quick setting compound. General repairs and repairs in the corners and edges. It can be effectively used in Water proofing, filling joints etc. It is suitable for Plugging of pre stressing / post tensioning holes. Used for depressions in pipes, sleepers etc. 

It is a polymer modified cementitious wate proofing system with a wide scope of applications in cement primers, Crack filling, Damp Proofing, Water Proofing and corrosion inhibition situations. It is a single component material when mixed with cement; it forms a flexible reinforced membrane on curing. 

APPLICATIONS/ ADVANTAGES: 

• Excellent Water impermeability. 
• High Tensile Strength. Cementitious waterproofing, Bonding Agent. 
• Good Bonding and adhesion to substrates like concrete, brick and metal. 
• For Basement Waterproofing, Bathrooms, Walls, Water tanks, Swimming pools, chajjas, Sunken Area's, Terrace, Sloping Roofs, Plastered surfaces, Sumps and Lift pits etc. 

It is composed of acrylic co-polymer emulsions and additives. It is an acrylic emulsion cement modifier and is used as a bonding agent for new to old cementations substrates. When mixed with cement, it forms a matrix and provides an excellent waterproof coating 

APPLICATIONS : For water proofing of Bathrooms/Terrace/ Water tanks/Sumps/Sunken slabs/ Lift Pits, Basements etc. 

It is polymer modified Grout Admixture which enhances the performance and bonding strength of Adhesives / Grouts.

It is a High Strength, Non-Shrink free flow Cementitious precision grout to withstand Static and dynamic loads for foundation. It is used for grouting of Machinery and Equipments. If consists of Portland cement, graded fillers and chemical additives which impart controlled expansion that require only addition of requisite water at site. It can also be used for anchoring a wide range of fixings like bolts, fence posts etc. 

It is a Acrylic polymer modified two component Cementitious water proofing system with a wide scope of applications in water proofing with high Elastomeric properties. It forms a flexible reinforced membrane on curing. 

APPLICATIONS:

Basement Waterproofing, Bathrooms, Walls, Water tanks, Swimming pools, chajjas, Sunken Area's, Terrace, Sloping Roofs, Plastered surfaces, Sumps and Lift pits etc. 

It is a three component solvent free low viscosity Epoxy resin mortar. It is Chemical, water resistant and Stain free. 

USES: It is recommended for use in the following industrial areas: Laboratories, clean rooms, Food Processing areas, Chemical/ Pharmaceutical, Drying rooms, Exhibition Halls etc.

It is a two component Solvent Free Epoxy modified Primer for Cement floor, concrete, VDF etc. USES: As a Primer for Epoxy based floor coating and self smoothening Topping. 

ADVANTAGES: Excellent adhesion to concrete, solvent free, high mechanical strength.

 It is polymer modified cementitious powder uses for Floor and Walls in both Interior and Exterior applications for fixing Tiles. It only needs addition of water before application.

It is a two component solvent free Epoxy Self level flooring system, which forms a tough, hard and joint less mirror like finish which is dust proof and easy to clean hygienic surface treatment available in different shades. 

USES:

It is recommended for use in the following industrial areas: Laboratories, clean rooms, Food Processing areas, Chemical/Pharmaceutical, Drying rooms, Exhibition Halls. 

ADVANTAGES:

Easy to apply, can be applied on fresh and as well as on old concrete, Excellent abrasion resistance, Excellent compressive strength.

It is a non shrink; non toxic polymer modified cementitious powder used for Floor and Walls in both interior and exterior applications for fixing Tile Joints. It contains good water resistance properties and High Bonding Strength. 

Applications: Interior / Exterior walls. + All types of ceramic, Porcelain, Granite, Marble etc. 

It is an integral waterproofing liquid for concrete, plaster, and mortar admixture. It is used to minimize permeability and increases waterproofing properties. It is based on refined ligno sulphonates. 

Uses

• It increases workability 
• Reduces Shrinkage. 
• To increase waterproofing properties of Concrete, Plastering and Mortar. 
• To increase compressive strength. 

Application

Roof slabs and screeds, Basements, External plastering, Bathroom floors, Water tanks, sumps, drains, Bathrooms wash areas, Foundations & Columns.

It is a Quick Setting Compound. It comprises o Cement, graded sand and chemical setting control agents and needs only required amount of water to be added before using. 

USES:

It is used to stop leaks from basements, sumps, water tanks as it contains quick setting compound. General repairs and repairs in the corners and edges. It can be effectively used in Water proofing, filling joints etc. It is suitable for Plugging of pre stressing / post tensioning holes. Used for depressions in pipes, sleepers etc.