S.S.Sanitary & Pipe Store

Saraswati Vihar, Delhi

The company is located in Delhi(India) and caters to the diverse requirements of the buyers. We are supported by such storage facility that provides protection from diverse damaging factors such as dust, moisture, rain, sunlight, etc.

Material : The raw material used is Medium Density Poly Ethylene (MDPE). We manufactures pipes in grades PE-80 & PE-100 for gas applications in sizes 20 mm to 250 mm (Outer Diameter) in all pressure ratings. Traditionally these pipes are identified by its color for different uses like blue for water, orange for petrol, and yellow for gas lines.

Specifications : MDPE pipes which confirms to national and International standards as ISO-4437, ISO-4427, IS-14885, BS-7281, DIN-8074/75. Our pipes can also be tailor made to meet the specific requirement of individual gas authorities or customers.

Salient Features :

• Flexible - Easy to Handle
• Corrosion Resistant - Tough and highly reliable in aggressive soils.
• Fusion Joints - High Integrity and reliability
• Light Weight - lighter in weight as compared to metal pipes.
• Crack Resistant - Excellent resistant to subsidence, traffic vibrations point leading and marshy ground.
• Homogenous - leakage free joints.
• Installation - low Installation cost.

By guaranteeing complete security of the products, we make sure that our buyers remain satisfied with us. For this, we store the entire lot in our state-of-the-art warehouse. Operating from Delhi(India), we are instrumental in offering the wide array of products to the customers.

Details :

• These ductile fittings are immensely used and are suitable for both joint- push on joint and mechanical joint.
• Coatings and linings for fittings and accessories
• Sizes - 50mm to 1200mm Ready Stock.
• Fittings and accessories shall normally be delivered internally and externally coated.

External coatings- Depending on external conditions of use and taking into account existing national standards, the following coatings may be supplied :

• Epoxy
• Zinc with finishing layer
• Polyethylene sleeving
• Polyurethane
• Adhesive tapes.
• Bituminous paint or synthetic resin paint
• These coatings shall comply with national standards, or with an agreed technical specification.

Internal Linings - Depending on the internal conditions of use and taking into account existing national standards, the following linings may be supplied :

• Bituminous paint or synthetic resin paint
• Portland cement (with or without additives) mortar
• High alumina (calcium aluminate) cement mortar
• Blast furnace slag cement mortar
• Cement mortar lining with seal-coat
• Polyurethane
• Polyethylene
• Epoxy.
• These linings shall comply with national standards, or with an agreed technical specification.

Type : IS : 9523 ISI Marked

Connection : Push On Joints

The basic materials named as raw materials should be of top-notch quality in order to maintain the quality of the finished goods. Thus, our experts source the raw materials only from the reliable vendors. We make sure that the products we offer to our clients will remain free from any kind of damage. Thus, we store the entire lot under secured environment in our capacious warehouse. These  Rubber Gaskets are highly flexible with outstanding break resistance and a long service life. 

Our team members make it possible to conduct online transactions, keeping the details confidential. Our transactions are completely crystal clear and thus, you can trust us. We are known for providing a qualitative array of products and thus our entire range is strictly checked against varied quality parameters. Cast Iron Non-Return Valve has a sturdy body with a distinct design and is available in a quality packaging. 

The Mechanical Joint Collar we offer is meant to supply high-pressure water so because of that it is made from high-quality HDPE or metals. The thickness of the collar can vary from 5-10mm.

Our products are packed according to the requirement of buyers, as we provide customized packaging solutions. Our packages are superior, secure and waterproof as well. Our dedicated staff is always on their toes to make certain that the raw material used is of high grade and certified by the experts as well. Cast Iron Strainer has a shiny polish on the surface with excellent heat and chemical resistance. 

We have separated our infrastructural facility into several units and one of them in warehouse. In order to maintain high quality standards, we laced our facility with modern technology. Sternly packed and delivered safely to the customers' provided address and that too in the committed time span.

Features :

• Optimum quality
• High durability
• Smooth operation

Advantages :

• Maximum load bearing strength
• More life span
• Very good resistance to corrosion
• Good abrasion resistance
• Weathering is less
• Raw material saving
• Excellent Ring Stiffness
• Chemically inert & environmentally safe
• Good impact strength
• Smooth inner wall, hence minimum Friction loss
• When bend, the roundness of pipe is retained
• Moderate flexibility takes care of Soil Settlement if any
• Takes heavy earth loads
• Easy jointing using couplers provided by our company
• Available with Anti Rodent & Non-Flame Propagating properties

Specification :

• Material - DWC Pipe
• Thickness - As per is Standards

Owing to our reliable transportation amenities, we are capable to deliver the placed orders within the given timeframe and at the right place.

Features :

• Manufactured from virgin pipe grade raw materials (PE63, PE80, PE100).
• Excellent corrosion and chemical resistance. Inert to most acidic and alkaline solutions.
• High flow characteristics.
• Light in Weight.
• Easy to handle & transport.
• Excellent flexibility combined with strength.
• Good abrasion resistance.
• Smooth inner walls minimizes frictional losses.
• Safe for potable water supply.

Applications :

• Ideal for potable water supply,
• Irrigation
• Bore-well applications

Specification :

• Brand Name - ISI Marked Heavy Duty
• Material - High density polyethylene pipe
• Thickness - As per is Standards
• Length - 6mtr

Sternly packed and delivered safely to the customers' provided address and that too in the committed time span. In order to meet ever-evolving requirements of the clients, we have installed a capacious storage facility. This unit helps us in keeping stock of products in different grades and specifications. Cast Iron Pipe Fittings have been made using the finest quality materials and are available in different sizes.

Specifications :

• Flange Fittings as per IS : 1538
• Socketted (Lead Joint) Fittings as per IS:1538
• Mechanical Joint Fittings as per IS:13382
• Customised Fittings as per requirement.

Application :

• The Cast Iron Flange Fittings are suitable for use with Cast Iron Flanged Pipes.
• Lead Joint Socketted Fittings are used with Cast Iron Socket & Spigot pipes.
• Mechanical Joint fittings are used with Cast Iron & Ductile Iron Socket & Spigot Pipes.

Backed by an efficient network and trustworthy resources, we have emerged as a dominant supplier of Sluice Valve in the market. We are a noteworthy name, engaged in offering qualitative lot of products that are the perfect outcome of premium material and modern work methods. Also, the material is sourced from the trusted places after complete quality checking.

Features :

• Rigid and sturdy design
• Low pressure loss across the valve

Brand Name : ISI Marked Heavy Duty

Material : Cast Iron, Ductile Iron

Application : Water , Sewage, Ash Handling Etc.