Specification

• Book type frame up to 15 kW
• Applicable for close and open loop application.
• Contactorless solution compliant to EN 81-1 + A3 and EN 81-20

Specification

• Suitable for VVVF, Hydraulic & 2-Speed lift control.
• Full collective (6 stop)/down collective (8 stop) with Auto/manual door.
• Floor indicator : Seven segment, Binary & Gray.
• Max up to 16 stop down collective / 11 stop full collective(with Extension).
• Built in LED indicators for all input & output; hence easy for troubleshooting.
• Special Features: Attendance, Fireman, Stop, Overload, ARD, PTC and Arrival Gong etc.
• All parameters are password protected.

Feature 

• Binary to seven segment conversion
• Input Voltage - 12VDC / 24VDC
• Easy mounting on Din-Rail
• Input Mode - Binary / Gray
• Input type - Sinking / Sourcing
• Output type - Sinking / Sourcing
• Floor Range - (-1) to 19
• PCB mount screw terminal block connectors

Feature

• programmable alarms: Full load & Overload
• Integrated display to show weight values up to 999 KG
• Automatic calibration using the wire rope diameter, meaning no need for test weights
• Universal rope clamps for all types of rope distribution
• EEPROM data memory.
• Integrated software to correct weight increases due to compensating chain
• Quick and easy installation (5 mins.)
• Suitable for 1:1-roped installations
• Connection options:
• Connectors.
•  Cable.

Introducing our Elevator Door Sensor, equipped with advanced features for enhanced safety and efficiency. With either 94 or 174 crossed beams, it provides comprehensive coverage, ensuring passenger safety. Its impressive 4000mm detecting range offers unmatched precision. Enjoy peace of mind with auto standby, low power consumption, and built in sunlight protection, making it a reliable choice for elevator safety.       

• Light Immunity >100000 LUX
• IP54 Rated
• Low Power Consumption'
• Comes with 4 mtr Cable and Power Supply Box
• High Performance and Low Cost
• Suitable for both Side Opening and Center Opening Doors
• Suitable for both Side Opening and Center Opening Doors 

Specification

• Available between 1 (up to 27 l/min) or 2 speed, with single or three phase 50/60 Hz submerged motors
• Maximum low noise as the motor is submerged
• Electronic Control board with Self-learn mode and Wifi Conection
• Control Panel interface with CANopen (1 Master board + 7 slave max)
• Do not need incoder in the shaft
• Working Pressure Range - 10 -45 Bar

Specification

• Suitable for 2 speed , hydraulic and VVVF Lift.
•  Communication mode - Parallal.
• Operating voltage - 24VDC/12VDC
• Cabinet Size -1230x540x250.
• Geared and Gearless open and close loop application.
• Motor Capacity - 4kw to 11kw with UPS ARD support.
• Communication mode - Parallal
• Operating voltage - 24VDC/12VDC.

Experience the stability with our elevator rail clips. Elevate your ride's reliability with our precision engineered clips for seamless rail support

Specification

• 7 Segment COP Display Board
• Input Voltage - 12VDC / 24VDC
• Common +ve
• Connectors - Relimate / Pluggable Terminal Block Connector
• Glower (Indicator for Overload
• Color - Red / Blue

ive into our range of elevator safety gears, engineered for uncompromising safety. Our Elevator Safety Gears are suitable & compatible with any kind of car frame & mechanism model. Also available for a variety of elevator load and speed requirements. Trust in our quality for the utmost protection in your elevators with MAS Safety Gears.        

Specification

• Book type frame up to 15 kW
• Applicable for close and open loop application.
• Contactorless solution compliant to EN 81-1 + A3 and EN 81-20

Specification

• Suitable for VVVF, Hydraulic & 2-Speed lift control.
• Full collective (6 stop)/down collective (8 stop) with Auto/manual door.
• Floor indicator : Seven segment, Binary & Gray.
• Max up to 16 stop down collective / 11 stop full collective(with Extension).
• Built in LED indicators for all input & output; hence easy for troubleshooting.
• Special Features: Attendance, Fireman, Stop, Overload, ARD, PTC and Arrival Gong etc.
• All parameters are password protected.

Feature 

• Binary to seven segment conversion
• Input Voltage - 12VDC / 24VDC
• Easy mounting on Din-Rail
• Input Mode - Binary / Gray
• Input type - Sinking / Sourcing
• Output type - Sinking / Sourcing
• Floor Range - (-1) to 19
• PCB mount screw terminal block connectors

Feature

• programmable alarms: Full load & Overload
• Integrated display to show weight values up to 999 KG
• Automatic calibration using the wire rope diameter, meaning no need for test weights
• Universal rope clamps for all types of rope distribution
• EEPROM data memory.
• Integrated software to correct weight increases due to compensating chain
• Quick and easy installation (5 mins.)
• Suitable for 1:1-roped installations
• Connection options:
• Connectors.
•  Cable.

Introducing our Elevator Door Sensor, equipped with advanced features for enhanced safety and efficiency. With either 94 or 174 crossed beams, it provides comprehensive coverage, ensuring passenger safety. Its impressive 4000mm detecting range offers unmatched precision. Enjoy peace of mind with auto standby, low power consumption, and built in sunlight protection, making it a reliable choice for elevator safety.       

• Light Immunity >100000 LUX
• IP54 Rated
• Low Power Consumption'
• Comes with 4 mtr Cable and Power Supply Box
• High Performance and Low Cost
• Suitable for both Side Opening and Center Opening Doors
• Suitable for both Side Opening and Center Opening Doors 

Specification

• Available between 1 (up to 27 l/min) or 2 speed, with single or three phase 50/60 Hz submerged motors
• Maximum low noise as the motor is submerged
• Electronic Control board with Self-learn mode and Wifi Conection
• Control Panel interface with CANopen (1 Master board + 7 slave max)
• Do not need incoder in the shaft
• Working Pressure Range - 10 -45 Bar

Specification

• Suitable for 2 speed , hydraulic and VVVF Lift.
•  Communication mode - Parallal.
• Operating voltage - 24VDC/12VDC
• Cabinet Size -1230x540x250.
• Geared and Gearless open and close loop application.
• Motor Capacity - 4kw to 11kw with UPS ARD support.
• Communication mode - Parallal
• Operating voltage - 24VDC/12VDC.

Experience the stability with our elevator rail clips. Elevate your ride's reliability with our precision engineered clips for seamless rail support

Specification

• 7 Segment COP Display Board
• Input Voltage - 12VDC / 24VDC
• Common +ve
• Connectors - Relimate / Pluggable Terminal Block Connector
• Glower (Indicator for Overload
• Color - Red / Blue

ive into our range of elevator safety gears, engineered for uncompromising safety. Our Elevator Safety Gears are suitable & compatible with any kind of car frame & mechanism model. Also available for a variety of elevator load and speed requirements. Trust in our quality for the utmost protection in your elevators with MAS Safety Gears.