Our Products
Scaffolding And Scaffolding Parts
1 Products availableScaffoldings Fittings
1 Products availableSteel & Steel Products
1 Products availableWe are leaders in the market for providing best range of square u bolts, Eye Bolts, Full Threaded Hex Bolts, Half Threaded Hex Bolts and hook bolts
U-bolts are common bolts that are used for building construction and/or vehicle suspension like leaf springs. Considered one of the major parts of your leaf spring installation, u-bolts will provide a permanent tie between the spring leaves. When describing what a u-bolt is, one can just look at the shape. With a letter U shape, the bolt features two threaded arms. The primary use of the U-bolt is to connect the axle to the leaf spring pack within the suspension system.
.
Size Details
Diameter (A) | B | C | D |
---|---|---|---|
3/8 | 1 9/16 | 2 5/8 | 1 3/4 |
3/8 | 2 1/16 | 4 3/8 | 1 3/4 |
3/8 | 3 1/16 | 3 7/8 | 1 3/4 |
7/16 | 3 1/16 | 2 13/16 | 1 3/4 |
1/2 | 2 1/16 | 4 5/16 | 1 3/4 |
1/2 | 2 1/16 | 5 5/16 | 1 3/4 |
1/2 | 2 1/16 | 6 5/16 | 1 3/4 |
1/2 | 3 1/16 | 4 5/16 | 1 3/4 |
1/2 | 3 1/16 | 5 5/16 | 1 3/4 |
1/2 | 3 1/16 | 6 5/16 | 1 3/4 |
Eye bolts have a variety of uses, one of the most common being in the rigging industry, where a steel eye bolt is ideal as an anchor point for many rigging applications. There are several guidelines to remember when using an eye bolt for rigging, anchoring, pulling, pushing or hoisting.
Regular rigging eyebolts should be used for straight line pulls only. For angular lifts, shoulder eye bolts are the better choice. Always inspect a threaded eye bolt prior to use and make sure the threads and receiving holes are clean. Never use an anchor eyebolt if the shank or eye has been bent, elongated, or deformed. The threaded part of eye bolts must protrude through the load so the nut is allowed full engagement of threading. If an eye bolt protrudes too far through the load, you may need to shim the bolt with washers between the nut and the load prior to putting the nut on.
Graph
Details
A (Size) |
B | C | D | Thread | Wire Dia. | WLL (LB) |
WT (LB) |
---|---|---|---|---|---|---|---|
3/16" | 0.85" | 1" | 0.37" | 44128 | 0.16" | 250 | 0.02" |
3/16" | 1.50" | 2" | 0.37" | 44128 | 0.16" | 250 | 0.03" |
3/16" | 1.75" | 1" | 0.37" | 44128 | 0.16" | 250 | 0.03" |
1/4" | 1.50" | 2" | 0.50" | 1/4"-20 | 0.21" | 400 | 0.06" |
1/4" | 2.00" | 3" | 0.50" | 1/4"-20 | 0.21" | 400 | 0.07" |
1/4" | 2.00" | 4" | 0.50" | 1/4"-20 | 0.21" | 400 | 0.08" |
1/4" | 2.00" | 5" | 0.50" | 1/4"-20 | 0.21" | 400 | 0.08" |
1/4" | 2.00" | 6" | 0.50" | 1/4"-20 | 0.21" | 400 | 0.09" |
5/16" | 1.25" | 2" | 0.63" | 5/16"-18 | 0.16" | 250 | 0.07" |
5/16" | 2.00" | 3" | 0.63" | 5/16"-18 | 0.16" | 250 | 0.08" |
5/16" | 4.00" | 1" | 0.63" | 5/16"-18 | 0.16" | 250 | 0.02" |
5/16" | 5.00" | 1" | 0.63" | 5/16"-18 | 0.16" | 250 | 0.02" |
5/16" | 2.00" | 6" | 0.63" | 5/16"-18 | 0.16" | 250 | 0.02" |
3/8" | 2.00" | 3" | 0.75" | 3/8"-16 | 0.33" | 1000 | 0.19" |
3/8" | 2.00" | 4" | 0.75" | 3/8"-16 | 0.33" | 1000 | 0.21" |
3/8" | 2.00" | 5" | 0.75" | 3/8"-16 | 0.33" | 1000 | 0.24" |
3/8" | 2.00" | 6" | 0.75" | 3/8"-16 | 0.33" | 1000 | 0.26" |
1/2" | 2.00" | 3" | 1.00" | 1/2"-13 | 0.43" | 1800 | 0.40" |
1/2" | 2.00" | 4" | 1.00" | 1/2"-13 | 0.43" | 1800 | 0.44" |
1/2" | 2.00" | 5" | 1.00" | 1/2"-13 | 0.43" | 1800 | 0.49" |
1/2" | 2.00" | 6" | 1.00" | 1/2"-13 | 0.43" | 1800 | 0.53" |
We offer Hex Head Bolts & Machinery Fasteners that are widely used in automobile, agriculture and electronics industries. These are specially designed keeping in mind the international quality standards and available in various lengths & sizes. Our range of Metal Bolts & Machinery Fasteners is appreciated for their high strength, durability & functionality. Keeping in mind the drawings, specifications, designs, samples and requirements laid down by our clients, we also hold expertise in providing Bolt Fasteners in standardized as well as non standardized forms from cold forging & bar turning.
Threads :
Size Details
Diameter | M3 | M4 | M5 | M6 | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
k | 2 | 2.8 | 3.5 | 4 | ||||||||||||
s max | 5.5 | 7 | 8 | 10 | ||||||||||||
e min | 6.01 | 7.66 | 8.79 | 11.05 | ||||||||||||
b up to 125 | — | 14 | 16 | 18 | ||||||||||||
b up to 200 | — | — | — | 24 | ||||||||||||
Length (mm) | Full Thread | Part Thread | Full Thread | Part Thread | Full Thread | Part Thread | Full Thread | Part Thread | ||||||||
Bare | Zinc | Bare | Zinc | Bare | Zinc | Bare | Zinc | Bare | Zinc | Bare | Zinc | Bare | Zinc | Bare | Zinc | |
G001 | G002 | G021 | G022 | G001 | G002 | G021 | G022 | G001 | G002 | G021 | G022 | G001 | G002 | G021 | G022 | |
6 | 100 | 100 | ||||||||||||||
8 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | |||||||||
10 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | |||||||||
12 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | |||||||||
14 | 100 | 100 | 100 | |||||||||||||
16 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | |||||||||
18 | 100 | 100 | 100 | 100 | 100 | |||||||||||
20 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | |||||||||
22 | 100 | 100 | ||||||||||||||
25 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | ||||||||
28 | 100 | |||||||||||||||
30 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | |||
35 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | ||||
40 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | ||||
45 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | ||||||
50 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | ||||||
55 | 100 | 100 | 100 | 100 | ||||||||||||
60 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | ||||||||
65 | 100 | 100 | 100 | 100 | 100 | |||||||||||
70 | 100 | 100 | 100 | 100 | 100 | |||||||||||
75 | 100 | 100 | ||||||||||||||
80 | 100 | 100 | 100 | 100 | 100 | |||||||||||
90 | 100 | 100 | 100 | 100 | ||||||||||||
100 | 100 | 100 | 100 | |||||||||||||
110 | 50 | 50 | ||||||||||||||
120 | 50 | 50 | ||||||||||||||
130 | 50 |
.
DIAMETER | M7 | M8 | M10 | M12 | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
k | 4.8 | 5.3 | 6.4 | 7.5 | ||||||||||||
s max | 11 | 13 | 17 | 19 | ||||||||||||
e min | 12.12 | 14.38 | 18.9 | 21.1 | ||||||||||||
b up to 125 | 20 | 22 | 26 | 30 | ||||||||||||
b up to 200 | 26 | 28 | 32 | 36 | ||||||||||||
Length (mm) | Full Thread | Part Thread | Full Thread | Part Thread | Full Thread | Part Thread | Full Thread | Part Thread | ||||||||
Bare | Zinc | Bare | Zinc | Bare | Zinc | Bare | Zinc | Bare | Zinc | Bare | Zinc | Bare | Zinc | Bare | Zinc | |
G001 | G002 | G021 | G022 | G001 | G002 | G021 | G022 | G001 | G002 | G021 | G022 | G001 | G002 | G021 | G022 | |
10 | 100 | 100 | ||||||||||||||
12 | 100 | 100 | 100 | 100 | 100 | |||||||||||
14 | 100 | 100 | ||||||||||||||
16 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | ||||||||
18 | 100 | 100 | ||||||||||||||
20 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | ||||||||
22 | 100 | 100 | ||||||||||||||
25 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | ||||||||
30 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | |||||||
35 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | ||||||
40 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | |
45 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | ||
50 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | ||
55 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | ||||
60 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | ||
65 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 50 | 50 | 50 | 50 | ||||
70 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 50 | 50 | 50 | 50 | |||
75 | 100 | 100 | 100 | 100 | 100 | 100 | 50 | 50 | 50 | |||||||
80 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 50 | 50 | 50 | 50 | ||||
85 | 50 | 50 | 50 | |||||||||||||
90 | 100 | 100 | 100 | 100 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | ||||
100 | 100 | 100 | 100 | 100 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | ||||
110 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | |||||||||
120 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | ||||||
130 | 50 | 50 | 50 | 50 | 50 | 50 | ||||||||||
140 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | |||||||||
150 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | |||||||||
160 | 50 | 50 | 50 | 50 | 50 | 50 | ||||||||||
180 | 50 | 50 | 50 | 25 | 25 | |||||||||||
200 | 50 | 50 | 50 | 25 | 25 |
.
Diameter | M14 | M16 | M18 | M20 | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
k | 8.8 | 10 | 11.5 | 12.5 | ||||||||||||
s max | 22 | 24 | 27 | 30 | ||||||||||||
e min | 24.49 | 26.75 | 30.14 | 33.53 | ||||||||||||
b up to 125 | 34 | 38 | 42 | 46 | ||||||||||||
b up to 200 | 40 | 44 | 48 | 52 | ||||||||||||
b over 200 | — | 57 | 61 | 65 | ||||||||||||
Length (mm) | Full Thread | Part Thread | Full Thread | Part Thread | Full Thread | Part Thread | Full Thread | Part Thread | ||||||||
Bare | Zinc | Bare | Zinc | Bare | Zinc | Bare | Zinc | Bare | Zinc | Bare | Zinc | Bare | Zinc | Bare | Zinc | |
G001 | G002 | G021 | G022 | G001 | G002 | G021 | G022 | G001 | G002 | G021 | G022 | G001 | G002 | G021 | G022 | |
20 | 50 | 50 | 50 | 50 | ||||||||||||
25 | 50 | 50 | 50 | 50 | ||||||||||||
30 | 50 | 50 | 50 | 50 | 25 | 25 | 25 | 25 | ||||||||
35 | 50 | 50 | 50 | 50 | 25 | 25 | 25 | 25 | ||||||||
40 | 50 | 50 | 50 | 50 | 25 | 25 | 25 | 25 | ||||||||
45 | 50 | 50 | 50 | 50 | 25 | 25 | 25 | 25 | ||||||||
50 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 25 | 25 | 25 | 25 | ||||
55 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 25 | 25 | 25 | 25 | 25 | |||
60 | 50 | 50 | 50 | 50 | 50 | 50 | 25 | 50 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | |
65 | 50 | 50 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | ||||
70 | 50 | 50 | 50 | 50 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
75 | 50 | 50 | 50 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | |||||
80 | 50 | 50 | 50 | 50 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
85 | 25 | 25 | ||||||||||||||
90 | 50 | 50 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | ||
95 | 50 | |||||||||||||||
100 | 50 | 50 | 25 | 50 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | |
110 | 25 | 25 | 25 | 25 | 25 | 25 | 10 | 10 | ||||||||
120 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 10 | 10 | 10 | 10 | |||
130 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 10 | 10 | |||||||
140 | 25 | 25 | 25 | 25 | 25 | 25 | 10 | 10 | 10 | |||||||
150 | 25 | 25 | 25 | 25 | 25 | 25 | 10 | 10 | ||||||||
160 | 25 | 25 | 25 | 25 | 25 | 10 | 10 | 10 | ||||||||
170 | 25 | 25 | 10 | 10 | ||||||||||||
180 | 25 | 25 | 25 | 25 | 10 | 10 | 10 | |||||||||
200 | 25 | 25 | 25 | 10 | 10 | 10 | ||||||||||
210 | 1 | |||||||||||||||
220 | 1 | 1 | ||||||||||||||
240 | 1 | 1 | ||||||||||||||
260 | 1 | 1 | 1 | |||||||||||||
280 | 1 | 1 | ||||||||||||||
300 | 1 | 1 | ||||||||||||||
320 | 1 | 1 | ||||||||||||||
340 | 1 | 1 | ||||||||||||||
360 | 1 | 1 | ||||||||||||||
380 | 1 | 1 | ||||||||||||||
400 | 1 | 1 | ||||||||||||||
470 | 1 | |||||||||||||||
550 | 1 | |||||||||||||||
580 | 1 |
.
Diameter | M22 | M24 | M27 | M30 | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
k | 14 | 15 | 17 | 18.7 | ||||||||||||
s max | 32 | 36 | 41 | 46 | ||||||||||||
e min | 35.72 | 39.98 | 45.2 | 50.85 | ||||||||||||
b up to 125 | 50 | 54 | 60 | 66 | ||||||||||||
b up to 200 | 56 | 60 | 66 | 72 | ||||||||||||
b over 200 | 69 | 73 | 79 | 85 | ||||||||||||
Length (mm) | Full Thread | Part Thread | Full Thread | Part Thread | Full Thread | Part Thread | Full Thread | Part Thread | ||||||||
Bare | Zinc | Bare | Zinc | Bare | Zinc | Bare | Zinc | Bare | Zinc | Bare | Zinc | Bare | Zinc | Bare | Zinc | |
G001 | G002 | G021 | G022 | G001 | G002 | G021 | G022 | G001 | G002 | G021 | G022 | G001 | G002 | G021 | G022 | |
40 | 10 | 10 | 10 | 10 | ||||||||||||
45 | 10 | 10 | 10 | 10 | ||||||||||||
50 | 10 | 10 | 10 | 10 | 1 | |||||||||||
55 | 10 | 10 | 10 | 10 | ||||||||||||
60 | 10 | 10 | 10 | 10 | 5 | 1 | 1 | |||||||||
65 | 10 | 10 | 10 | 10 | 10 | |||||||||||
70 | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 5 | 5 | 1 | 1 | ||||
75 | 10 | 10 | 10 | 10 | 1 | |||||||||||
80 | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 5 | 1 | 1 | |||||
90 | 10 | 10 | 10 | 10 | 10 | 5 | 5 | 1 | 1 | 1 | ||||||
100 | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 5 | 5 | 1 | 1 | 1 | 1 | |||
110 | 10 | 10 | 10 | 10 | 5 | 1 | ||||||||||
120 | 10 | 10 | 10 | 10 | 10 | 5 | 1 | 1 | 1 | |||||||
130 | 10 | 10 | 10 | 1 | 1 | |||||||||||
140 | 10 | 10 | 10 | 10 | 10 | 5 | 1 | 1 | ||||||||
150 | 10 | 10 | 10 | 1 | ||||||||||||
160 | 10 | 10 | 10 | 5 | 1 | 1 | ||||||||||
180 | 10 | 10 | 1 | |||||||||||||
200 | 10 | 10 | 10 | 1 | 1 | 1 | ||||||||||
220 | 1 | 1 | 1 | |||||||||||||
240 | 1 | 1 | 1 | |||||||||||||
250 | 1 | |||||||||||||||
260 | 1 | 1 | 1 | |||||||||||||
280 | 1 | 1 | 1 | |||||||||||||
300 | 1 | 1 | 1 | |||||||||||||
320 | 1 | 1 | ||||||||||||||
340 | 1 | 1 | ||||||||||||||
360 | 1 | 1 | ||||||||||||||
380 | 1 | |||||||||||||||
400 | 1 |
We offer Hex Head Bolts & Machinery Fasteners that are widely used in automobile, agriculture and electronics industries. These are specially designed keeping in mind the international quality standards and available in various lengths & sizes. Our range of Metal Bolts & Machinery Fasteners is appreciated for their high strength, durability & functionality. Keeping in mind the drawings, specifications, designs, samples and requirements laid down by our clients, we also hold expertise in providing Bolt Fasteners in standardized as well as non standardized forms from cold forging & bar turning.
Threads :
Size Details
Diameter | M3 | M4 | M5 | M6 | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
k | 2 | 2.8 | 3.5 | 4 | ||||||||||||
s max | 5.5 | 7 | 8 | 10 | ||||||||||||
e min | 6.01 | 7.66 | 8.79 | 11.05 | ||||||||||||
b up to 125 | — | 14 | 16 | 18 | ||||||||||||
b up to 200 | — | — | — | 24 | ||||||||||||
Length (mm) | Full Thread | Part Thread | Full Thread | Part Thread | Full Thread | Part Thread | Full Thread | Part Thread | ||||||||
Bare | Zinc | Bare | Zinc | Bare | Zinc | Bare | Zinc | Bare | Zinc | Bare | Zinc | Bare | Zinc | Bare | Zinc | |
G001 | G002 | G021 | G022 | G001 | G002 | G021 | G022 | G001 | G002 | G021 | G022 | G001 | G002 | G021 | G022 | |
6 | 100 | 100 | ||||||||||||||
8 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | |||||||||
10 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | |||||||||
12 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | |||||||||
14 | 100 | 100 | 100 | |||||||||||||
16 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | |||||||||
18 | 100 | 100 | 100 | 100 | 100 | |||||||||||
20 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | |||||||||
22 | 100 | 100 | ||||||||||||||
25 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | ||||||||
28 | 100 | |||||||||||||||
30 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | |||
35 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | ||||
40 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | ||||
45 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | ||||||
50 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | ||||||
55 | 100 | 100 | 100 | 100 | ||||||||||||
60 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | ||||||||
65 | 100 | 100 | 100 | 100 | 100 | |||||||||||
70 | 100 | 100 | 100 | 100 | 100 | |||||||||||
75 | 100 | 100 | ||||||||||||||
80 | 100 | 100 | 100 | 100 | 100 | |||||||||||
90 | 100 | 100 | 100 | 100 | ||||||||||||
100 | 100 | 100 | 100 | |||||||||||||
110 | 50 | 50 | ||||||||||||||
120 | 50 | 50 | ||||||||||||||
130 | 50 |
.
Diameter | M7 | M8 | M10 | M12 | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
k | 4.8 | 5.3 | 6.4 | 7.5 | ||||||||||||
s max | 11 | 13 | 17 | 19 | ||||||||||||
e min | 12.12 | 14.38 | 18.9 | 21.1 | ||||||||||||
b up to 125 | 20 | 22 | 26 | 30 | ||||||||||||
b up to 200 | 26 | 28 | 32 | 36 | ||||||||||||
Length (mm) | Full Thread | Part Thread | Full Thread | Part Thread | Full Thread | Part Thread | Full Thread | Part Thread | ||||||||
Bare | Zinc | Bare | Zinc | Bare | Zinc | Bare | Zinc | Bare | Zinc | Bare | Zinc | Bare | Zinc | Bare | Zinc | |
G001 | G002 | G021 | G022 | G001 | G002 | G021 | G022 | G001 | G002 | G021 | G022 | G001 | G002 | G021 | G022 | |
10 | 100 | 100 | ||||||||||||||
12 | 100 | 100 | 100 | 100 | 100 | |||||||||||
14 | 100 | 100 | ||||||||||||||
16 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | ||||||||
18 | 100 | 100 | ||||||||||||||
20 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | ||||||||
22 | 100 | 100 | ||||||||||||||
25 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | ||||||||
30 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | |||||||
35 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | ||||||
40 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | |
45 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | ||
50 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | ||
55 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | ||||
60 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | ||
65 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 50 | 50 | 50 | 50 | ||||
70 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 50 | 50 | 50 | 50 | |||
75 | 100 | 100 | 100 | 100 | 100 | 100 | 50 | 50 | 50 | |||||||
80 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 50 | 50 | 50 | 50 | ||||
85 | 50 | 50 | 50 | |||||||||||||
90 | 100 | 100 | 100 | 100 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | ||||
100 | 100 | 100 | 100 | 100 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | ||||
110 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | |||||||||
120 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | ||||||
130 | 50 | 50 | 50 | 50 | 50 | 50 | ||||||||||
140 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | |||||||||
150 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | |||||||||
160 | 50 | 50 | 50 | 50 | 50 | 50 | ||||||||||
180 | 50 | 50 | 50 | 25 | 25 | |||||||||||
200 | 50 | 50 | 50 | 25 | 25 |
.
Diameter | M14 | M16 | M18 | M20 | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
k | 8.8 | 10 | 11.5 | 12.5 | ||||||||||||
s max | 22 | 24 | 27 | 30 | ||||||||||||
e min | 24.49 | 26.75 | 30.14 | 33.53 | ||||||||||||
b up to 125 | 34 | 38 | 42 | 46 | ||||||||||||
b up to 200 | 40 | 44 | 48 | 52 | ||||||||||||
b over 200 | — | 57 | 61 | 65 | ||||||||||||
Length (mm) | Full Thread | Part Thread | Full Thread | Part Thread | Full Thread | Part Thread | Full Thread | Part Thread | ||||||||
Bare | Zinc | Bare | Zinc | Bare | Zinc | Bare | Zinc | Bare | Zinc | Bare | Zinc | Bare | Zinc | Bare | Zinc | |
G001 | G002 | G021 | G022 | G001 | G002 | G021 | G022 | G001 | G002 | G021 | G022 | G001 | G002 | G021 | G022 | |
20 | 50 | 50 | 50 | 50 | ||||||||||||
25 | 50 | 50 | 50 | 50 | ||||||||||||
30 | 50 | 50 | 50 | 50 | 25 | 25 | 25 | 25 | ||||||||
35 | 50 | 50 | 50 | 50 | 25 | 25 | 25 | 25 | ||||||||
40 | 50 | 50 | 50 | 50 | 25 | 25 | 25 | 25 | ||||||||
45 | 50 | 50 | 50 | 50 | 25 | 25 | 25 | 25 | ||||||||
50 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 25 | 25 | 25 | 25 | ||||
55 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 25 | 25 | 25 | 25 | 25 | |||
60 | 50 | 50 | 50 | 50 | 50 | 50 | 25 | 50 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | |
65 | 50 | 50 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | ||||
70 | 50 | 50 | 50 | 50 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
75 | 50 | 50 | 50 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | |||||
80 | 50 | 50 | 50 | 50 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
85 | 25 | 25 | ||||||||||||||
90 | 50 | 50 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | ||
95 | 50 | |||||||||||||||
100 | 50 | 50 | 25 | 50 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | |
110 | 25 | 25 | 25 | 25 | 25 | 25 | 10 | 10 | ||||||||
120 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 10 | 10 | 10 | 10 | |||
130 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 10 | 10 | |||||||
140 | 25 | 25 | 25 | 25 | 25 | 25 | 10 | 10 | 10 | |||||||
150 | 25 | 25 | 25 | 25 | 25 | 25 | 10 | 10 | ||||||||
160 | 25 | 25 | 25 | 25 | 25 | 10 | 10 | 10 | ||||||||
170 | 25 | 25 | 10 | 10 | ||||||||||||
180 | 25 | 25 | 25 | 25 | 10 | 10 | 10 | |||||||||
200 | 25 | 25 | 25 | 10 | 10 | 10 | ||||||||||
210 | 1 | |||||||||||||||
220 | 1 | 1 | ||||||||||||||
240 | 1 | 1 | ||||||||||||||
260 | 1 | 1 | 1 | |||||||||||||
280 | 1 | 1 | ||||||||||||||
300 | 1 | 1 | ||||||||||||||
320 | 1 | 1 | ||||||||||||||
340 | 1 | 1 | ||||||||||||||
360 | 1 | 1 | ||||||||||||||
380 | 1 | 1 | ||||||||||||||
400 | 1 | 1 | ||||||||||||||
470 | 1 | |||||||||||||||
550 | 1 | |||||||||||||||
580 | 1 |
.
Diameter | M22 | M24 | M27 | M30 | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
k | 14 | 15 | 17 | 18.7 | ||||||||||||
s max | 32 | 36 | 41 | 46 | ||||||||||||
e min | 35.72 | 39.98 | 45.2 | 50.85 | ||||||||||||
b up to 125 | 50 | 54 | 60 | 66 | ||||||||||||
b up to 200 | 56 | 60 | 66 | 72 | ||||||||||||
b over 200 | 69 | 73 | 79 | 85 | ||||||||||||
Length (mm) | Full Thread | Part Thread | Full Thread | Part Thread | Full Thread | Part Thread | Full Thread | Part Thread | ||||||||
Bare | Zinc | Bare | Zinc | Bare | Zinc | Bare | Zinc | Bare | Zinc | Bare | Zinc | Bare | Zinc | Bare | Zinc | |
G001 | G002 | G021 | G022 | G001 | G002 | G021 | G022 | G001 | G002 | G021 | G022 | G001 | G002 | G021 | G022 | |
40 | 10 | 10 | 10 | 10 | ||||||||||||
45 | 10 | 10 | 10 | 10 | ||||||||||||
50 | 10 | 10 | 10 | 10 | 1 | |||||||||||
55 | 10 | 10 | 10 | 10 | ||||||||||||
60 | 10 | 10 | 10 | 10 | 5 | 1 | 1 | |||||||||
65 | 10 | 10 | 10 | 10 | 10 | |||||||||||
70 | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 5 | 5 | 1 | 1 | ||||
75 | 10 | 10 | 10 | 10 | 1 | |||||||||||
80 | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 5 | 1 | 1 | |||||
90 | 10 | 10 | 10 | 10 | 10 | 5 | 5 | 1 | 1 | 1 | ||||||
100 | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 5 | 5 | 1 | 1 | 1 | 1 | |||
110 | 10 | 10 | 10 | 10 | 5 | 1 | ||||||||||
120 | 10 | 10 | 10 | 10 | 10 | 5 | 1 | 1 | 1 | |||||||
130 | 10 | 10 | 10 | 1 | 1 | |||||||||||
140 | 10 | 10 | 10 | 10 | 10 | 5 | 1 | 1 | ||||||||
150 | 10 | 10 | 10 | 1 | ||||||||||||
160 | 10 | 10 | 10 | 5 | 1 | 1 | ||||||||||
180 | 10 | 10 | 1 | |||||||||||||
200 | 10 | 10 | 10 | 1 | 1 | 1 | ||||||||||
220 | 1 | 1 | 1 | |||||||||||||
240 | 1 | 1 | 1 | |||||||||||||
250 | 1 | |||||||||||||||
260 | 1 | 1 | 1 | |||||||||||||
280 | 1 | 1 | 1 | |||||||||||||
300 | 1 | 1 | 1 | |||||||||||||
320 | 1 | 1 | ||||||||||||||
340 | 1 | 1 | ||||||||||||||
360 | 1 | 1 | ||||||||||||||
380 | 1 | |||||||||||||||
400 | 1 |
Note : Do NOT use for overhead lifting, support of human weight, athletic or playground equipment. Inspect frequently
Size Details
Thread | Wire Diameter | Overall Length | Inside Diameter | Thread Length |
---|---|---|---|---|
43236 | 0.27" | 5" | 3/4" | 3.25" |
43236 | 0.27" | 6" | 7/8" | 4" |
42437 | 0.33" | 7" | 1-1/16" | 4.5" |
42437 | 0.33" | 8" | 1-1/16" | 5.5" |
J-shaped bolt that can be used in a variety of applications and are made from several different materials. They are most commonly used to suspend electrical wiring and sheet metal from wooden structures as well as in the furniture industry to hold springs.
Graph
Size Details
Size (A x B) |
Inside Hook Diameter (C) |
Thread Length (D) |
---|---|---|
8-32 x 1-7/8 | 5/16 | 1-1/4 |
10-24 x 2-1/8 | 3/8 | 1-1/4 |
1/4-20 x 2-5/16 | 7/16 | 1-1/2 |
1/4-20 x 4 | 1/2 | 2 |
1/4-20 x 6 | 5/8 | 2-1/2 |
5/16-18 x 3 | 5/8 | 2 |
5/16-18 x 5 | 5/8 | 2-1/2 |
5/16-18 x 7 | 5/8 | 3-7/8 |
3/8-16 x 3-3/4 | 5/8 | 2-1/4 |
3/8-16 x 5 | 5/8 | 2-1/4 |
3/8-16 x 7 | 5/8 | 2-1/4 |
1/2-13 x 6 | 1 | 3 |
L-Bolts are used to attach a plate member to a concrete or masonry foundation, provide anchorage for lightweight post bases, and for general anchorage to concrete. They are packaged with nuts and cut washers. Many building codes require that additional bearing plates be used with the bolt in high wind and high seismic areas; consult local codes.
Size Detail (D X L X C X T)
U-bolts are common bolts that are used for building construction and/or vehicle suspension like leaf springs. Considered one of the major parts of your leaf spring installation, u-bolts will provide a permanent tie between the spring leaves. When describing what a u-bolt is, one can just look at the shape. With a letter U shape, the bolt features two threaded arms. The primary use of the U-bolt is to connect the axle to the leaf spring pack within the suspension system.
.
Size Details
Diameter (A) | B | C | D |
---|---|---|---|
3/8 | 1 9/16 | 2 5/8 | 1 3/4 |
3/8 | 2 1/16 | 4 3/8 | 1 3/4 |
3/8 | 3 1/16 | 3 7/8 | 1 3/4 |
7/16 | 3 1/16 | 2 13/16 | 1 3/4 |
1/2 | 2 1/16 | 4 5/16 | 1 3/4 |
1/2 | 2 1/16 | 5 5/16 | 1 3/4 |
1/2 | 2 1/16 | 6 5/16 | 1 3/4 |
1/2 | 3 1/16 | 4 5/16 | 1 3/4 |
1/2 | 3 1/16 | 5 5/16 | 1 3/4 |
1/2 | 3 1/16 | 6 5/16 | 1 3/4 |