S. R. Chemical

Gandhinagar, Gujarat

SR is the counted among the leading manufacturer, Exporter and supplier of high quality Epoxy Grout. Ideally suited for residential and commercial area where materials must resist physical abuse, shock and chemical attack, this epoxy grout perfectly prevents stains, spillage, chemical attack in filled groove thickness of tiles. Easy to mix and easy to clean when used in a proper way, this grout is well known for its glossy finish and other remarkable properties. We ensure to provide this well tested epoxy grout to our clients at most genuine rates within promised time frame

We deal in SR-Plasticizer – reckoned for high water reducing rate. The Polymer Superplasticizer is eco-friendly and has high durability. It is non-toxic, non-irritating. As a trusted Manufacturer and Supplier, we offer high-quality Polymer Superplasticizer that significantly improves performance of concrete. One can purchase Polymer Superplasticizer in bulk from us.

 

Description : SR-Plasticizer is a new type of polymeric superplasticizer which has a high water reducing rate. As the third generation of water reducers, it is very effective in producing concretes with different levels of workability including applications that require the use of self-consolidating concrete (SCC). It complies with ASTM C 494 requirements for Type F, high-range water-reducing admixtures. It is known as high range water reducing admixture, are chemical admixtures used where well-dispersed particle suspension is required. Their addition to concrete or mortar allows the reduction of the water to cement ratio. This effect drastically improves the performance of the concrete. The use of superplasticizers can increase the workability of the concrete mixture; increase the concrete strength; decrease the concrete porosity; improve the durability of concrete; and enable the production of self-consolidating concrete and high performance concrete. It is suitable for ready-mixed, pumping, hot weather concrete and the precast elements used in the construction which requires good workability and high early and final strengths 
Advantages :

• To maintain slump perfectly within 1-3 hours
• Allowed long range transportation of fresh concrete with its excellent retention ability
• Provide fresh concrete with excellent retation more than 120 minutes
• Low dosage, and so to save cost in comparison with other water reducers at equal performance
• High water reduction
• To enable a much better flowability of the mixture
• To improve the strength and durability of the concrete drastically
• Eco-friendly (no formaldehyde or benzene)

 
Dosage : This product recommended content is 0.25% -0.85% of the total weight of cementation material, actually content should be experimentally determined. 
Extra Benefits :

• Non-toxic, non-irritating and no corrosion to steel bars
• High water reducing rate: up to 25%
• Strengthening ability
• Improving concrete durability and impermeability
• Appropriate setting time
• Good compatibility with various types of cement

We are Manufacturer and Supplier of Cement Accelerator. Our SR-Hardener Cement Accelerator is extensively used for mixing mortars, concrete and other cement/sand mixes. It doesn’t alter the color of material. We provide the Cement Accelerator at competitive prices. One can place bulk orders with us.

 

Description : SR-Hardener Cement Accelerator is a polymeric hardener for cement mixes such as concrete, mortars and other sand/cement mixes. It is a clear liquid which will not alter the color of the material to which it is added. SR-Hardener Cement Accelerator is perfect for use in cooler climates or during winter. It is also suitable when installations need to be finished quickly. 
Uses / Advantages :

• SR-Hardener Cement Accelerator can be used to accelerate the setting time of concrete, mortar and other sand/cement mixes.
• Suitable for use when concreting in cold weather climates.
• Cement Accelerator promotes high early strength and allows earlier finishing and removal of formwork and moulds.
• By using SR-Hardener Cement Accelerator you can achieve 7 day compressive strengths in 48 hours.

 
Precautions :

• Always pre-dilute SR-Hardener Cement Accelerator. Do not add SR-Hardener Cement Accelerator directly to the dry concrete or sand/cement mix.
• Avoid contact with skin when working with cementations mixes. Protect by wearing rubber gloves etc.
• For addition to cement based tile adhesives, add 125ml SR-Hardener Cement Accelerator mixed into the amount of clean water (as specified by the manufacturer) with each 20 kg bag of adhesive.
• SR-Hardener Cement Accelerator will reduce the amount of working time that the concrete or sand/cement mix normally provides. Always take this into account by mixing smaller batches and carrying out work in smaller stages.

 
Environmental & Safety Precautions : Care should be taken when handling, that applicators wear PVC or similar gloves and safety goggles. • For a full MSDS on this product, contact the SR Technical Advisory Line

Spotting fluid is a specially manufactured product used to freeing deferentially stuck pipe in a quick and easy manner. This highly effective soak solution has been proven numerous field applications to significantly and freeing struck pipe.

We are offering rig wash.Rig wash is water based cleaner and detergent especially developed to remove oil, fuel grease and dirt deposits, by action of a special blend of surfactant, this unique cleaner penetrates and disperses these deposits so that they can easily be washed always with water leaving no oils firm.

Contact us to purchase Accelerating Admixture. The Hexo Thermal Poly-Bond 95 Accelerator, we deal in, is ideal for setting the concrete and increasing its hardness rate. Our Accelerating Admixture is very effective at low temperature. One can place bulk orders for our Accelerating Admixture.  
Details :

• HTPB 95 can be used either to increase the rate of stiffening/setting of the concrete or to increase the rate of hardening and early strength gain to allow earlier demoulding and handling. Most accelerators primarily achieve one rather than both of these functions. Accelerators are most effective at low temperature. It is a prime use of set accelerators is in the control of the setting time of concrete floor slabs in cold weather when any extension of set delays finishing and power toweling operations. Set accelerators are a very effective way of controlling the setting time of such concretes, even those containing cement replacements.
• Accelerators are also used to reduce the risk of damage by freezing when concreting in cold weather and to allow the earlier removal of formwork. The exposed faces of struck concrete must still be protected and properly cured. At normal temperatures, a technically better way of enhancing early strength is to use a high range water reducer/super plasticizer. A large reduction (greater than 15%) in the water cement ratio can more than double compressive strength at ages less than 24 hours. Accelerators can be used in conjunction with super plasticizers where very early age strength is required, especially at lower temperatures. Other applications where accelerating admixtures are used are in urgent concrete repairs and in sea defense work, to ensure early stiffening of concrete in the tidal zone.

 
Mechanism :

• Accelerating admixtures increase the rate of hydration of tri calcium silicate (C3S) and tri calcium aluminates (C3A) phases of the cement, thereby providing earlier heat evolution and strength development. It should be noted that accelerators do not depress the freezing point of water significantly and should not be referred to as anti-freeze admixtures. The accelerating effect of both set and strength accelerating admixtures is most pronounced at lower temperatures of the order to 5-10°C. Liquid admixtures are generally considered easier to dispense accurately and are more readily dispersible evenly through the mix.
• Accelerating admixtures can be used with all types of Portland cement including those covered by EN 197-1 and with other binders blended with CEM 1 cement at the mixer. It can achieve 1-day strength gains of up to 100% higher than the equivalent plain concrete mix. However, the cost of achieving this with a chloride free accelerator
• The setting time of concrete containing an accelerator will be shorter than that of the equivalent plain concrete containing no accelerator. The acceleration is typically 1 to 2 hours for a set accelerator but less than one hour for hardening accelerators. This will be affected by accelerator type, dose and ambient temperature. It is stipulates that for set accelerators, a mix containing the admixture must have an initial setting time at 5°C of 60% or less than that of a mix without the accelerator. It has the ability to break down the natural passivity of steel provided by the alkalinity of concrete and thereby encourages the corrosion of reinforcement or other embedded steel. The corrosive influence of calcium chloride and its ability to increase shrinkage make it a potential hazard to long-term durability in reinforced concrete and its use should be avoided for this application.
• Accelerators increase the rate of heat release and may, therefore, give a greater temperature rise than the equivalent plain concrete mix. The total heat of hydration is unaffected. Accelerating admixtures do not normally have any adverse effect on bleeding. The bleeding capacity of most concretes is related to setting time. Cold weather will prolong setting of concretes and so exacerbate the potential for concretes to bleed. Hence, accelerators may reduce bleeding purely as a result of reduced concrete setting time

We deal in Tiles Grout, which is a cementations grout. It is designed to be used with almost all kinds of natural stone and ceramic tiles. It contains biocide that makes it resistant to bacteria and moulds. It is an antibacterial, acid proof, and stable at 1800°C Temperature. Our strong adhesive force, can be applied in the gaps of tiles and stones. With super mold resistance, the Tile Grout has excellent waterproofing performance. The Environment-friendly Tile Grout is not toxic, and doesn’t cause any pollution.

 

Uses : ECO POLY BOND 75 can be used in grout joints that are 1 – 10mm wide.ECO POLY BOND 75 can be used on internal or external wall and floor grouting applications.ECO POLY BOND 75 can also be used in swimming pools, China and wet areas.

Surface Preparation : Before commencing grouting, ensure the tile adhesive has set firmly. This usually requires 24 hours with the majority of tile adhesives. Remove any spacer lugs, take-out any excess adhesive and any loose or foreign material from the grout joints. In general, ensure the grout joints are clean and dry. Allow the grout to cure for 24 hours before cleaning the grout haze with a soft dry cloth.

Mixing : Add ECO POLY BOND 75 to a bucket of clean water mixing constantly with until a thick creamy consistency is achieved.Allow the mixture to stand for 5 minutes, remix, and then use the adhesive.

Features :

• Physical Appearance Free flowing Powder

• Potlife Approx. 60 minutes @ 20^oC

• Curing Time 24 hours @ 20^oC

• Time to Traffic Full Traffic after 12 hours (depending on site conditions)

• Compressive Strength ≥ 1.75 Mpa under all test conditions

• Water Absorption Rate 30 MIN ≤ 1.5g

Buyers can contact us to purchase Lignite Powder, which is naturally occurring material meant for reducing deflocculates water base mud and fluid loss. It is partially soluble additive that offers thin filter cakes having low permeability. One can place bulk orders for our Lignite Powder. We offer Lignite Powder at the most competitive prices.

Details : Lignite Powder is an excellent emulsifier for oil in water emulsions as wells a secondary deflocculated and is especially effective in high-temperature applications.It performs exceptionally well in dispersed system as a synergistic additive with lingo sulphonates.It can be used in virtually any water base fluid. Lignite Powder may be used for rheology and filtration control in all water-base muds. It is especially effective at stabilizing the properties of muds exposed to high temperature and contamination such as CO2 and calcium. Lignite Powder is especially effective when treating cement contamination. It reduces the high viscosity and pH of cement contamination muds and reacts with calcium to lessen the contaminating effects. Normal treatment of Lignite Powder range from 2.87 to 22.7 kg/m3. Due to their low pH, it’s treatment require additional caustic soda or an alternative alkaline material to maintain a consistent pH. A normal ratio is 1 sack of caustic soda for every 4sachs of SR-LIG. In high salinity systems, it is preferable to premix the Lignite Powder in Medium pH fresh water to enhance dispersibility then add the premix to the active system. It is most effective in mud systems with an alkaline pH in the range of 8 to 10.

Features :

• Reduce fluid loss
• Deflocculates water base mud
• Low permeability filter cakes

Purchase from us Pregelatinized Starch that is high-purity drilling starch. It is available in powder form and is cold-water soluble. It can be used in all kinds of water-based drilling mud system. We provide the Pregelatinized Starch extracted from potato and corn. And base forms can be altered depending on specific requirement of customer.

Details : Pregelatinized Starch is used to control API Fluid loss in sea, saturated salt and polymer drilling muds. The normal concentration required range between 2 and 6 ppb. the exact concentration on the desired Fluid control required.

Features :

• Cold Water Soluble

• Customized as per the requirement

• Control API Fluid Loss

We are a trusted name as Rapeseed Acid Oil Manufacturer and Supplier in the country. The Rapeseed Oils that we deal in are reckoned for high degree of lubricity. They are also used as lubricants as well as in the form of lubricant formulations. Our Rapeseed Acid Oils are extensively used spinning lubricants.

Applications : Textile, steel, and shipping industries; as cutting, metal-forming, rolling, fabricating, and drilling oils; and as marine lubes.

We deal in EP Lubricant, which is a proprietary formulation of surfactants and natural oils in a non-toxic base. It is a free-flowing liquid, and completely biodegradable. Also, the EP Lubricant does not fluoresce and is non-toxic. One can purchase EP Lubricant in any quantity from us. We are a trusted name as EP Lubricant Manufacturer and Supplier from Gujarat, India.

Details : E P Lubricant should be used in water base muds whenever the torque, drag or excessive bit gauge wear are encountered. This product can be used in all water-base mud systems, is calcium tolerant and exhibition additional properties such as emulsification and wetting. SR-TORQUE REDUCER will not affect the performance or characteristics of the drilling fluid system being used in addition this excellent product will not provide a sheen on the water because it contains no aromatics. This non-fluorescing characteristic is very important because it means that SR-TORQUE REDUCER will not adversely downhole well-logging operations. SR-TORQUE REDUCER is stable at high temperature. E P Lubricant is typically loaded at a concentration of approximately 0.279% by volume of the mud system under most condition. However, concentration of up to 2.1% by volume may necessary depending on the severity of the problem encountered. The higher concentrations may be used without adverse consequences if warranted by extreme conditions.

Features :

• Used In All Water Base Mud System
• Higher Concentration
• Effective Price

We deal in hydrocarbon free Silicone Defoamer. The carefully formulated Silicone Defoamer can be used in freshwater as well as saltwater fluids. Our extensively used Silicone Defoamer reduces foaming tendencies, and completion fluid. Our Silicone Defoamer is reckoned for precise formulation and is tested by experts.

Details : Silicone Defoamer It doesn’t contain oil, doesn’t cause sheen when applied on water location, and is biodegradable. It remains effective, even after initial defoaming, and continues to suppress foam generation over the extended period of time. Easy to mix. Work quickly and is effective at low concentrations in a wide range of systems.

Features :

• Hydrocarbon Free
• Contain No Oil
• Easy to Mix

We are a trusted name as Manufacturer and Supplier of Liquid Hand Wash Cleaner. The Hand Wash Cleaner is specially formulated for everyday use. It can be used by everyone in the family. It is an excellent solution that fights germs, leaving the hands soft and absolutely clean. Purchase Liquid Hand Wash Cleaner at the most competitive prices from us.

Features :

• Germs Fighter
• Skin Caring
• Cost Effective Price

Our expertise lies in manufacturing and supplying Liquid Dish Wash Cleaner, which is extensively used nationwide. It is ideal for washing dishes made from stainless steel, non-stick cookware, glass, plastic, etc. Purchase Liquid Dish Wash Cleaner at the most competitive prices from us. We are a trusted name offering the best quality with the assurance of timely delivery.

Details : Liquid Dish Wash Cleaner is antiseptic crystal plus vinegar has superior degreasing power on the sponge time longer. It penetrates the sponge and turns into the gel upon contact with water keeping it charged from the first to last the dish.

Features :

• Good Smell
• Superior Degreasing Power
• Pocket-Friendly Price

Drilling detergent, a proprietary blend of aqueous surfactants, is specially formulated for use in fresh water, and in low-solids drilling fluids as a wetting agentSlow breakup of cutting in the annulus while being pumped to the surface, Counteract the sticking tendencies of clays, thereby reducing wall packing, bit balling, booting-off, and formation of mud rings, Promote selling of cuttings at the surface.

SR-CELCIN is a high purity calcium carbonate. It is a white powder with a specific gravity of 2.7 approx. It is used for weighting of any aqueous and oil based drilling fluids. It is 97 to 98% soluble in hydrochloric acids, thus minimizing permanent plugging of the producing formation.

SR Thin is a high performance synthetic polymer in liquid form. It is an environmentally compatible, high performance, multipurpose mud conditioner for rheology control in water based muds.

Contact us to purchase highly effective Tile Adhesives, which is fast setting adhesive. We manufacture the Tile Adhesives from select materials only, ensuring excellent bond. Our Tile Adhesives are specially meant for indoor and outdoor applications. They can be purchased in different packaging quantities from us.

Details :

• Tile Adhesive is fast setting an excellent acrylic resin-modified interior adhesive choice for high-performance/high-traffic installations. Its rapid, trouble-free application minimizes downtime and maximizes satisfaction for your commercial job or your home. Use for installing ceramic and natural stone tiles including mosaics, slate and porcelain on walls or floors. It is the ultra-strong cement-like substance used to securely bond all types of ceramic and stone tile to a wide variety of underlying substrates.
• It is most innovative, premium brand in the industry. They cost more for a reason; they are formulated specifically to protect your clients' investment in premium stone and tile. It makes no sense to lay expensive stone or tile on cheap mortar that will crack at the first sign of stress. It offers a variety of mortar systems custom-engineered for different uses, such as the type of stone or tile being used, the size of the stone/tile, type of substrate, interior or exterior use, or expected exposure to extreme temperatures, moisture, or foot traffic. It is Ideal for ceramic tile over walls and ceilings and for installers who prefer slightly longer working times. It is excellent for setting marble and ceramic tile over interior walls and floors.
• It grips wall tiles and stone up to 7 lbs. per square foot and installs 177% larger tile than ordinary mastics. Bright white, non-staining formula is perfect for light-colored stone and grout. Adding a special latex additive to thin-set tile mortar makes the mortar up to 3 times harder and increases its flexibility. This is especially important when setting tiles in bathrooms or other places that will be subjected to extremes of temperature and moisture. A latex additive should be added to thin-set mortar whenever the mortar will be used to bond tiles or other materials to plywood or wallboard. It is Suitable for fixing absorptive or non-absorptive wall or floor tiles on various substrates such as concrete, brickwork, plaster etc. It possesses increased open time for application.
• It is Suitable for fixing thermo-insulation polystyrene boards on cement-based substrates. Moreover, when reinforced with fiberglass mesh and applied on the exterior side of fixed thermo-insulation boards, it constitutes the ideal substrate for the subsequent MARMOCRET PLUS or MARMOCRYL layer. Possesses increased open time.

Features :

• No additive needed - just mix with water
• Superior bond for ceramic, porcelain and natural stone
• Strongest bond to plywood (interior/exterior use)
• Rated for extra-heavy commercial traffic