Our Product / Services
Wires
2 Products availableWire Accessories
2 Products availableElectrical & Electronic Testing Devices
2 Products availableTapes
2 Products availableTransformer Parts
1 Products availablePaper
1 Products availableInsulators And Insulation Materials
1 Products availableAnti Theft Device
1 Products availableWe offer the best product range of Dc High Voltage Test Device, Cable Accessories, Bus Bar Sleeves, Automatic cable test van and LV & MV Heat Shrink.
With over 50 years of experience in electrical products and processes, 3M provide solutions that are based on a strong understanding of the industry and the technology that drives it.3M Electrical Products Division designs and manufactures a comprehensive line of products that can address diverse electrical applications. Widely recognized for innovation, reliability and global corporate strength - 3M provide products and services for every electrical requirement.
The 3M heat shrinkable bus bar insulation tubing range is suitable for round and rectangular bus bars for upto 52 kV applications. The tube is made of a special formulated heat shrinkable cross linked polyolefin based material providing excellent electrical insulation property for both indoor and outdoor environments. The tubings which is of Reddish brown colour, has excellent electrical insulation, high resistance to splitting, good moisture resistance and excellent track resistance properties. The tubing shrinks upon application of heat from temperature of 120 150 deg C using gas torch in the field and in oven for large scale production, or heating in electric oven. The tubing provides insulation and protection against flash over and accidentally induced discharge. It provides adequate insulation in the places where space is constraint. |
Application |
The use of 3M ATX tube provides protection of live bus bar from phase to phase to and phase to ground failures. By using ATX tubings, equipment can be designed by reducing air spacing between bus bars. This will help in reduction of the switch gears equipment. |
There are hardly any other longer-lasting, more robust and cost-effective testing devices than the two-piece high-voltage test devices from the PGK HB series. They generate continuous adjustable test voltages with mains frequency or optionally DC with positive or negative polarity. The display instruments for current and voltage, the safety control unit and the regulating transformer for the voltage are integrated in the operating unit.
The ATG 2 burn down transformer is used for impedance reduction of cable faults in low- and medium-voltage networks. The short-circuit proof 2300 VA stray field transformer delivers a maximum voltage of 10 kV and is housed in a fully enclosed 19 housing.
The BAUR titron is a new automatic cable test van designed for cable fault location and cable testing. The new generation of the high-performance cable test van is based on state-of-the-art technology and provides effi cient, safe and reliable cable fault location and cable testing.
Solar Cables are designed to meet the growing needs of the solar industry. Our solar cables is just the beginning of our plans to develop and launch green technology in wires & cables. Solar Cables are flexible and are resistant to abrasion & moisture. Regardless of your panel-to-grid needs, we have the cables to meet your requirements.
Applications
These cables are designed for connecting photovoltaic power supply systems. These cables can be used indoor & outdoor for flexible and fixed installations with high mechanical strength in extreme weather conditions.
Standards
2 Pfg 1169/08.2007.
The range of Aerial Bunched Cable Accessories from 3M comprises of Insulation Piercing Connector (IPC), Fuse Switch Dis-connectors, Dead-end Clamps, Suspension Clamps, Eye Hooks, Pre-insulated Bi-metal Lugs, Pre-insulated Aluminium Sleeves, End Caps and Distribution Boxes.
The ZIGOR SOLAR XTR3 is a three phrase solar inverter. It is responsible for converting the direct current generated by photovoltaic panels into alternating current for injection into the electrical power distribution grid.
The ZIGOR SOLAR XTR3 can be used both to back up consumption and as a system to produce electricity. In the first case, if the electrical power consumption of the location in which the inverter is installed is lower than the power consumed by this unit, excess production is delivered to the grid. If this consumption exceeds production, the energy required to complete the balance is taken from the electricity grid. In the second case, all the power generated by the equipment is injected into the electricity grid. In both cases, the appropriate power measurement systems must be installed for each use.
KEY FEATURES | |||||||||||||||||||
|
A Separable Connector, also referred to as a Plug-in is a separable cable termination - designed for opening and closing only when a circuit is de-energized. Neither voltage nor current can be present when this type of Separable Connector is opened or closed. Separable Connectors from 3M offer distinct advantages in comparison to conventional terminations.
The 3M Separable Connector is designed to ensure peak performance and maximum safety.
| ||
3M cold shrink products are easier to apply and built to withstand extreme environmental conditions. Designed with the unique cold shrink delivery system from 3M, these products guarantee enhanced performance along with lower installation costs. All cold shrink products from 3M conform to IEC / CENELAC / IEEE / VDE & IS international standards.Powered by innovation, 3M is constantly refining the cold shrink product portfolio to ensure enhanced performance. |
| |
The heat shrinkable components of the 3M Heat Shrink product portfolio consists of Rain sheds, Breakouts (2-way, 3-way & 4-way), Right angle & Straight boots, Cable end caps, Wrap around sleeves, Bus bar tubing, Medium wall & Dual wall tubes.Heat Shrink products from 3M ensure excellent stress control properties, exceptional insulation characteristics, long term weathering performance, ease of installation and reliable performance in polluted environments. All Heat Shrink products from 3M are type tested at CPRI and conform to IS specifications. What's more, the entire Heat Shrink product portfolio is backed by an extensive network of trained engineering personnel, powered by the assurance of 3M service. |
| |
3M Across the Electrical NetworkCustomers can benefit from 3M's 60+ years of experience in supplying innovative, highly-reliable products used throughout the electrical network and drawing from 40 core technologies to develop unique solutions to solve your toughest challenges. | |
1. 66 KV Cable Accessories | |
2. 110 KV Cable Accessories | |
3. 132 KV Cable Accessories |
| |
Besides safeguarding the quality and function of technical equipment and accessories, the Scotch Spray product range from 3M also enhances service life. |
| |
3M EMI Absorbers contain a thin, flexible backing made of silicone rubber and magnetic materials along with an acrylic pressure-sensitive adhesive. These absorbers are made of flexible soft metal flake filler in a polymer resin with an acrylic adhesive system and a removable liner. |
The A 1422 Multifunctional test adapter has all functionalities as its predecessor A 1322 plus complete support for testing of Arc Welding Equipment. This makes it a perfect test and troubleshooting instrument for the demanding user. As its predecessor it has unique functions such as active polarity testing, differential leakage testing and testing of 3-phase RCDs, which makes the A 1422 Active 3-phase Adapter an ideal instrument for advanced applications. The A 1422 adapter is designed for use alongside the MI 3321 MultiservicerXA and the MI 3310/MI 3310A SigmaPAT enabling functional tests to be carried out on machines up to 40 A. Several test socket outlets make this instrument an ideal tester for testing industrial extension leads that may also be RCD protected.The test results and parameters can be saved into the large built-in memory for further downloading, analysis and the test report printing with the help of the PC SW PAT Link PRO that is provided with both supporting test instruments.
The MI 3121H Smartec 2, 5 kV Insulation / Continuity is the portable measuring instrument for complete diagnostic testing of insulation and continuity measurements.
Complete range of digital power quality measuring instruments for 1- and 3-phase electric supply systems.
The NEW MI 2892 Power Master is a hand-held three phase power quality analyser with a large easy-to-read graphical colour display enabling the user to detect harmonics, phasors and waveforms anomalies in the installation simply by connecting the device. The instrument is designed for a long term recording as well as for troubleshooting power quality problems in three-phase and single-phase power distribution systems. The handy Quick Set buttons makes the instrument more user friendly and are allowing faster data overview for troubleshooting. Advanced PC SW package PowerView3 enables detailed analysis of recorded data, direct reading from the microSD memory card, analysis of long term records and automatic creation of professional test report.
PowerView PC SW platform contains a package of functionalities needed for profund evaluation of power quality phenomena and creation of complex reports like:
Dimensions (w x h x l): 230 x 140 x 80 mm
Mass: 0.96 kg
A complete selection of digital multimeters, clamp-on meters and voltage stickers for industry, laboratory use, electrical contractors and domestic applications.
Professional clamp-on meters for industrial use. Measuring range up 2000 A, TRMS. Possibility to measure power quality parameters.
Electrical safety verification of machines, portable electrical appliances and switchgear with advanced digital measuring instruments.
Do you develop, manufacture or service machines, electrical appliances or switchgear? Assure electrical safety of your product!
Structured cabling network testing in accordance with EN50173, ISO/IEC 11801 and other similar standards.
Universal handheld instruments for the measurement, logging and analysing parameters specific for indoor environments are designed to provide flexibility, versatility and convenience to most demanding of professional users.
Fault simulators for education purpose on low-voltage electrical installations in compliance with standards: VDE 0100, BS 7671, CEi 64.8, HD 384
Demonstration board MI 3088 simulates typical photovoltaic (PV) system with one PV module and DC/AC inverter. It repre-sents a typical installation that consist of PV string, DC switch box , DC/AC inverter and one phase connection to the power grid. It is intended for use preferably by sales personnel for demonstration of the measuring methods and procedures on DC and partially on AC side of a PV system.
Polywater Solar Panel Wash is specially formulated for cleaning all types of solar panels without oxidizing or abrading aluminum rails and mounting apparatus. Many common car-wash soaps and window cleaners contain alkalines that promote oxidation and require a deionized water rinse.
Dust, bird droppings, pollution, pollen, tree sap, plant matter residue, etc., all reduce the overall effectiveness of solar panel generation capacity. A 2011 study by the World Academy of Science, Engineering and Technology concluded that "accumulated dust on the surface of photovoltaic solar panels can reduce the systems efficiency by up to 50%." Panels must be cleaned regularly to maximize system performance and longevity.
Even if only one panel in a string operates at 10% less than full capacity due to contamination, the entire string suffers the same 10% performance loss. This is known in the industry as the "Christmas-lights effect". The small cost of regular cleaning with Polywater Solar Panel Wash yields big savings by increasing panel capacity.
Features
Effective Cleaner
Biodegradable
Does not contain solvents - no VOCs - non-flammable
Phosphate-free - Chlorine-free
pH neutral - non-caustic - non-alkaline
Will not affect aluminum rails or racking like common detergents
Does not require deionized or purified water rinse
How to Clean Solar Panel Using Polywater SPW
For best results product should be diluted.
For pressure washers, hose sprayers, etc., dilute 1:25
For persistent soils, use a higher concentration of Solar Panel Wash and a soft cloth or brush to remove any remaining residues. Rinse the panels with 1:25 SPW solution and allow to dry. SPW leaves a clean surface that will dry faster, reduce spotting, and repel soil, making it easier to clean your panels the next time. As an option, rinse surface with water. Observe the condition of the panelsand repeat the process above if necessary.
| |
3M Terminal Protector components are injection moulded from EPDM rubber for enhanced insulation and improved track resistance, and facilitate insulation of right angle connections and in-line connections.3M Terminal Protectors are endowed with a host of features
|
| |
The non-linear stress grading material in the 3M Tapex System eliminates the rather cumbersome and time-consuming process of tapering the XLPE insulation at the ferrule end of the straight through joints. The stripped cable insulation, conductor screen and insulation screen are rebuilt with Self Amalgamating EPDM Tapes. The joint is enclosed and encapsulated with a cast resin system to provide mechanical protection and to prevent water ingress. Specially designed for peak performance in conditions with uncontrolled back fill and presence of sub-soil water, 3M Tapex System - with minor modifications - is ideal for jointing XLPE to PILC cables, while creating Transition Joints.The 3M Tapex System is a highly proven and trusted method of jointing, which extends even beyond 66kV class of cables - and requires minimum skills for installation by jointers. 3M Kastex Cable Accessories for Low Voltage PVC / PILC / XLPE Cables are designed for easy installation and prolonged service life. 3M Kastex joints and terminations for LV Cables are based on a cast resin system that contains polyurethane, ensuring compatibility with cable components. While the cast resin system also provides electrical insulation, mechanical protection and moisture imperviousness to the joint, the crutch sealing arrangement - also cast resin based - ensures easy installation and environmental protection of the core trifurcation. 3M Kastex joints are specifically designed for compression connection, mechanical connectors and soldering of cable conductors - and are available in the following types.3M Tapex & Kastexs are endowed with a host of features
|
| |
3M Scotch Vinyl tapes provide high dielectric strength along with resistance to moisture, UV rays, abrasion, corrosion, alkalis and acids. The aggressive, pressure-sensitive, rubber-based adhesive of the vinyl electrical tape performs well at both high and low temperatures. The fade-resistant colors of these vinyl tapes ensure fast identification of electrical phases, leads, piping and safety areas. Vinyl tapes from 3M provide primary electrical insulation for up to 600 volts and are effective in jacketing applications for high-voltage cables and wire harnessing. |
| |
Heat Shrink products from 3M ensure excellent stress control properties, exceptional insulation characteristics, long term weathering performance, ease of installation and reliable performance in polluted environments. All Heat Shrink products from 3M are backed by an extensive network of trained engineering personnel, powered by the assurance of 3M service. |
| |
Backed by performance engineering - IPT products endure the most rigorous applications at temperatures ranging from sub-zero to over 250C. These high performance materials have been tried and tested to ensure reliable performance in a wide variety of applications like high temperature electrical applications, insulation in transformers, motors, generators and flame barriers in household appliances. |
| |
The 3M range also includes other products like electrical insulation tapes from acetate, glass cloth tapes, composite, antistatic, epoxy, polyester & polyimide film tapes, PTFE, paper & filament reinforced tapes and a wide range of heat-shrink products that cater to both standard and advanced performance requirements. What's more, a wide variety of liquid resins with unique electrical and physical properties ensure ideal insulating and protective material for electrical / electronic parts and assemblies. |
| |
|
3M ACCR is a lightweight, thermal expansion product that ensures low sag at high ampacities. ACCR is a unique amalgamation of aluminum matrix core and heat resistant Al-Zr at the outer strands, assuring a strong advantage over other conductors.
ACCR's characteristic includes, strength and durability, better corrosion resistance, high modulus for less stretch, higher electrical conductivity and lower thermal expansion for less sag. This permits the use of higher operating temperatures, which in turn leads to higher ampacities. Both the composite core and the outer Al-Zr strands contribute to the overall conductor robustness and conductivity.