S M SYSTEMS

Jail Road, Nashik, Maharashtra

The American Polywater Corporation PowerPatch : Leak Repair System provides fast and effective in-field leak repair for transformers, PILC cables, and other oil and gas insulated electrical equipment. Once a leak has been temporarily stopped using the two-part Putty, the Sealant is applied and cures to form a strong, durable patch. The PowerPatch Sealant is the functioning patching material. PowerPatch System is supplied with all the materials required to seal electrical insulating oil and gas leaks. The sealant bonds to polyethylene, lead, aluminium, ceramic and steel.

We are the super stockists of 3m m-seal make cable jointing kits.
3M Cable Jointing Kit are available in both heat shrink and cold shrink for indoor, outdoor and straight through joints. These cable jointing are available in all sizes and voltages ranges.

We are the super stockists of 3m m-seal make cable jointing kits.
3M Cable Jointing Kit are available in both heat shrink and cold shrink for indoor, outdoor and straight through joints. These cable jointing are available in all sizes and voltages ranges.

We are the super stockists of 3m m-seal make cable jointing kits.
3M Cable Jointing Kit are available in both heat shrink and cold shrink for indoor, outdoor and straight through joints. These cable jointing are available in all sizes and voltages ranges.Single Core

3M Cable Jointing Kit are available in both heat shrink and cold shrink for indoor, outdoor and straight through joints. These cable jointing are available in all sizes and voltages ranges.

baur oilbreakdown voltagetest setis an instrument used to find the dielectric strength of the insulating oils normally used in the distribution and high voltage transformers. Our range is widely demanded in domestic and international markets for their efficiency, quality, performance and durability. These are availed by our clients at affordable prices in the industry.

BAUR online PD spot tester.
Reliable, cost saving, easy to use.1. Automatic PD detection during normal mains operation (without switching off the cable route)2. With DeCIFer technology: PD identification based on 500 million measurement results3. Precise online PD mapping with iPD transponder.liona is a portable online PD spot tester for measuring and locating partial discharges in cables and switchgear during normal mains operation.

Tracy BAUR partial discharge inductorDescription:Simple and exact pin-pointing of partial discharge positions1. Portable, battery-operated signal coupling device2. Suitable for cables and cable accessories3. Inductive signal coupling4. Avoids costly, unnecessary replacements of PD-free cable accessories.The BAUR tracy partial discharge inductor is used for the exact location of partial discharge positions in cables and cable accessories (partial discharge pin-pointing).

the powerpatch : leak repair system provides fast and effective in-field leak repair for transformers, pilc cables, and other oil and gas insulated electrical equipment. Once a leak has been temporarily stopped using the two-part putty, the sealant is applied and cures to form a strong, durable patch. The powerpatch sealant is the functioning patching material. Powerpatch system is supplied with all the materials required to seal electrical insulating oil and gas leaks. The sealant bonds to polyethylene, lead, aluminium, ceramic and steel.

the mi 3123 smartec earth / clamp is an earth resistance tester with the ability to perform 4-wire earth resistance measurement and 4-wire specific earth resistance measurement. With the optional a 1018 and a 1019 current clamps the instrument can perform 4-wire earth resistance measurement with one current clamp, contactless earth resistance testing with two clamps and trms current measurement up to 20 a. Configurable limits enable a pass / fail evaluation of test results. All the results can be saved on the instrument and then downloaded via the optional software for evaluation and professional report generation after testing. The lightweight design, large bright lcd screen, built-in help screens, optional downloading via rs232 or usb ports and overvoltage category cat iv make the mi 3123 an incredible earth resistance measuring instrument.

pd-tad 62 baur portable pd diagnostics system
description:a new dimension in cable condition evaluation.1. Comprehensive 360 cable analysis with parallel partial discharge and dissipation factor measurement*2. Time-optimised and safe cable condition evaluation.3. Lightweight and compact for mobile use on site.the pd-tad 62 portable pd diagnostics system is used in combination with a baur vlf generator for carrying out:- partial discharge testing and location.- vlf cable testing with parallel partial discharge testing.- parallel partial discharge and dissipation factor measurement*- full mwt*

We are the main supplier of this product.

Instrument Transformers play an integral role in an electrical utilitys infrastructure, from monitoring electrical supply, mitigating potential equipment and personnel hazards to revenue monitoring and billing facilitation.Thus maintaining instrument transformers to within their manufactured specification is vital in securing a utilitys operating integrity.Red Phase Instruments is a pioneer in the design and manufacture of portable CT and PT test instruments. We are constantly innovating and developing an increasing product portfolio of instrument transformer test equipment that will assist field professionals with the health assessment of Instrument Transformers in both on-line and off-line situations.

Sheath Repair Kit, Electrical tape, Mastics & special use tapes
Creates sheath repairs and repairs to lead auxiliaries when combined with Scotch VM Vinyl/Mastic Tape and Scotchrap 50 All Weather Corrosion Protection Vinyl Tape. No flame, electricity, or chemicals needed. Perfect for all hazardous environments, including manholes and vaults. Just add water.

The stretchy knit fabric strip is saturated with a curable black resin syrup that starts to cure when the water is added. Forms a tough, durable fiberglass reinforced composite. Provides structural strength, as well as cable and splice protection.

No special tools, mechanical ties, rails, or clips are required. Once wet, the fiber strip becomes tacky and sticks to itself, so it wraps easily around any shape or size. Installation is quick, easy, and craft forgiving. Just add water wrap and in minutes you have a tough, permanent covering.

We are suppliers and traders of 3M EHVCable Accessorieswhich enhances the maximum capacity and value to Extra High Voltage (EHV) lines. The rated capacity of this device depends upon the ability of other lines in the path to support the system. Therefore flowing of energy depends on the robustness of the product.

Features:

• Robust construction
• High measuring capacity
• Water-resistant and anti corrosive
• Made up of high quality conducting materia

Cable Accessories for 3m-Lv & Mv, HV Cold and Heat Shrinkis procured from the certified dealers in the market who are engaged in offering defect free range to us. These are available in various specifications and can be custom made as per the demands of the clients. Our range is accessed at nominal prices in the market by our valued clients. These are used in different industrial applications.

Cable Accessoriesfor3M-Terminal Protectorare used as an insulating barrier which is used in conjunction with any indoor termination in various sectors. Our range is widely appreciated for their efficiency, superior quality and optimum performance. These are sourced from the reliable vendors in the market. We offer these to our clients at affordable prices in the market.

Our organization is one of the prominent suppliers and distributors ofCable Accessories for 3M-Separable Connectorwhich are widely used in various sectors forsplicing and terminating activity. These are sourced from the certified vendors in the market who use quality materials in fabricating. We offer these accessories to our clients at reasonable prices in the industry.

The portable, one-piece PGK 80 high-voltage test device for generating negative DC voltage up to 80 kV is primarily used for onsite testing of paper-insulated mass-impregnated cables in the medium-voltage network. The high voltage is generated through a high-voltage transformer with secondary voltage-multiplier. The internal operating frequency of 20 kHz enables the smallest of device dimensions.

This Metrel3 Phase Transformer Turns Ratio Test Setis used to measure the turns ratio of power, instrument, and distribution transformers in a substation or manufacturing environment. This is widely used by power transformer manufacturers for various kinds of applications. These are highly demanded for their efficiency, long service life, durability and optimum quality. We supply these to our clients at nominal prices in the market.

Features:

• Stand-alone or remote-control operation
• Accurately measures ratio, phase deviation and excitation current
• Field upgradeable without compromise to calibration
• Built-in capability for storing and downloading test results in an XML format, via RS-232, Ethernet or USB ports (depending on model)
• Works in the presence of high interference/high voltage
• Highest ratio measurement (45, 000:1); highest accuracy (0.1%)
• Displays % error vs. name plate with pass/fail limits

the baur phg 70/80 portable vlf test systems are used for cable and cable sheath testing of medium-voltage cables of up to 50 kv and electrical equipment.

universal test and diagnostics system flexible, modular, extendable.the modular baur phg test and diagnostics system is used for cable testing, dissipation factor measurement and partial discharge testing.

frida vlf testing and diagnostics unit

baur vlf tester and diagnostics devices

p.p1 margin: 0.0px 0.0px 0.0px 0.0px; font: 12.0px helvetica; min-height: 14.0px p.p2 margin: 0.0px 0.0px 0.0px 0.0px; line-height: 20.1px; font: 20.0px helvetica span.s1 font: 12.0px helveticathe new cable condition evaluation generation

cable testing and dissipation factor diagnostics in one device

easy and quick test setup

automatic testing and diagnostic sequences

compact dimensions and lightweight

p.p1 margin: 0.0px 0.0px 0.0px 0.0px; font: 12.0px helvetica; min-height: 14.0px p.p2 margin: 0.0px 0.0px 0.0px 0.0px; line-height: 9.1px; font: 9.0px helvetica p.p3 margin: 0.0px 0.0px 0.6px 0.0px; font: 9.0px helvetica p.p4 margin: 0.0px 0.0px 0.0px 0.0px; font: 9.0px helvetica p.p5 margin: 0.0px 0.0px 0.0px 0.0px; font: 9.0px helvetica; min-height: 11.0px span.s1 font: 12.0px helvetica

the portable baur frida and frida td devices are used

for testing medium-voltage cables and electrical equipment (generators, transformers and switchgear)

for cable sheath testing

for cable diagnostics (frida td): dissipation factor measurement and monitored withstand test with tan

partial discharge measurement*

full monitored withstand test with tan and partial discharge measurement*

p.p1 margin: 0.0px 0.0px 0.0px 0.0px; font: 12.0px helvetica; min-height: 14.0px p.p2 margin: 0.0px 0.0px 7.0px 0.0px; line-height: 15.1px; font: 15.0px helvetica p.p3 margin: 0.0px 0.0px 2.5px 0.0px; font: 11.5px helvetica p.p4 margin: 0.0px 0.0px 0.0px 0.0px; font: 11.5px helvetica span.s1 font: 12.0px helvetica