S M SYSTEMS

Jail Road, Nashik, Maharashtra

Large dial face for maximum readabilitySide mounting bourdon tube thermometers equipped with a 6" (152.4 mm) dial face for temperature indication. Features a resettable maximum temperature pointer and up to 4 adjustable switches (contacts) for control and alarm functions. Can be installed in an optional well to allow units to be replaced without lowering the oil level in the tank or disturbing the tank seal.

Features:

• Bourdon tube measurement with resettable maximum pointer
• Up to 4 user adjustable switches (contacts) for control and alarms
• 6 inch (150mm) dial face with an angular dial span of 90 for easy viewing
• Built in spring loaded pointer for switch field testing

Large dial face for maximum readability:

• Large 6 in (152.4 mm) dial face with large graduations and letters for optimal legibility
• UV-stabilized polycarbonate lens (resists yellowing with age) for lifetime readability

Durable design for survivability in harsh environments:

• UV-stabilized polycarbonate lens for high-impact strength. Securely fastened in place with stainless steel bezel ring and stainless steel hardware
• UL and CSA recognized switches
• Molded neoprene channel gasket is uniformly clamped in place, protecting against water entry around entire lens
• Free-breathing housing reduces internal condensation buildup. Dual breathers act as vacuum breaker to prevent unwanted moisture intake
• Magnetically coupled maximum pointer is integral with lens for ease of resetting and moisture path elimination
• Rugged construction with corrosion resistant materials
• Die-cast aluminum housing resists corrosion with two-part, long-life epoxy finish

Up to 4 adjustable switches:

• Up to four switches (contacts) can be set by the factory or can be easily set or changed in the field
• Switches feature lockdown screws to resist tampering and vibration
• Two switches can be set to trigger at the same temperature

Easy to install and operate:

• Dial temperature range, number of switches (4 maximum), switch settings and wiring, electrical connection type, cable/wire types and lengths, probe dimensions, and thermo well characteristics can all be customer specified to meet specific application requirements
• Mounts directly onto well (pocket)
• "One-screw" access; bezel clamp and lens easily removed to reach switch settings and 'quick-test' mechanism.
• Maximum temperature pointer follows indicating pointer upward and remains at hottest reading to track high temperature levels. Resets easily with magnetically coupled knob on face of lens
• 'Quick-test' feature enables simple testing of switch actuation and related controlled transformer functions by moving indicating pointer clockwise through switch settings. The no-stress, spring-loaded clutch prevents damage to internal thermometer components

control and alarm functions with integrated switching capabilityside mounted bi-metal thermometers with temperature indication and resettable maximum temperature pointer. Features up to 3 control and/or alarm switches(contacts). Models can be combined with a well (pocket) to allow for replacement without draining or compromising the tank.

features:

• bi-metal measurement with resettable maximum pointer
• 5 inch (130mm) dial face
• up to 2 fully adjustable switches (contacts) for control and alarms (165/167 has one additional fixed switch)
• the 165/167 series thermometers offers up to 3 switches (contacts) for control and alarm functions (akm 47080 offers 2 switches)
• control motors up to 3/4 hp
• up to 2 fully adjustable switches (contacts) for control and alarms (165/167 has one additional fixed switch)
• the 165/167 series thermometers offers up to 3 switches (contacts) for control and alarm functions (akm 47080 offers 2 switches)
• control motors up to 3/4 hp
• up to 2 fully adjustable switches (contacts) for control and alarms (165/167 has one additional fixed switch)
• rugged cast-aluminum housing with thermoset powder coat finish for survivability in harsh environments
• sealed 165/167 models available for submersible applications such as vault transformers
• unsealed models feature case venting to prevent moisture from accumulating under the lens and keep the dial face clear
• gasketed lens is held on with bezel to form a leak-tight seal for protecting the internal mechanism from the environment

option:

• temperature ranges applicable for oil (liquid) or winding (winding simulation requires heated well or qualitrol thermal plate)
• up to 3 switches
• tank connection style and probe length, compatible well
• electrical connection type, connector cable type and wire colors
• 0-5vac electronic output for remote monitoring

application:

for temperature indication with integrated control and alarm functions. Designed for use where the point of measurement (the well or pocket) is on the side of the apparatus and can be easily viewed.

maximum view of temperature indication with flexible probeside or top mounting bourdon tube thermometers equipped with a 4.5" (114.3 mm)dial face for temperature indication. Features a swivel probe design that allows for the dial to be angled for more convenient viewing, a resettable maximum temperature pointer, and up to 3 switches (contacts) for control and alarm functions. Normally installed in optional well (pocket) that allows units to be replaced or tested without lowering the oil level in the tank or breaking the tank seal.

features:

• bourdon tube measurement with resettable maximum pointer
• flexible head for side or top mount applications
• up to 2 fully adjustable switches (contacts) and one additional fixed switch for control and alarm functions
• 5 inch (130 mm) dial face with an angular dial span of 120 for easy viewing

optimize view of temperature indication with flexible stem

• swivel stem provides up to 70 degrees of angular rotation for convenient viewing
• vented case design prevents moisture from accumulating under the lens (sealed versions available)
• the lens is made of clear, uv stabilized, molded polycarbonate for easy, scratch-resistant viewing throughout the life of the unit
• equipped with a 4.5" (114.3 mm) dial face for clear temperature indication

control and alarm with up to 4 integrated contacts

• available with up to 3 switches for alarm, cooling and/or controlling functions (2 fully adjustable and 1 fixed)
• control motors up to 3/4 hp

designed and tested to ensure quality performance

• a neoprene gasket, integral to the lens and bezel assembly, forms a weather-resistant seal to protect the internal mechanism from the environment
• provides accuracy within 2% of full scale
• sealed models are rated to nema 6, ensuring protection against the weather
• the magnetically coupled maximum indicating pointer is integral to the polycarbonate lens, providing easy reset without creating a moisture leak path
• rugged, epoxy coated, cast-aluminum housing

option:

• temperature ranges applicable for oil (liquid) or winding (winding simulation requires heated well or qualitrol thermal plate)
• up to 3 switches
• tank connection style and probe length, compatible well
• electrical connection type, connector cable type and wire colors.

application:

for temperature indication with integrated control and alarm functions. Designed for use where the point of measurement (the well or pocket) is on the side or top of the apparatus and can be easily viewed.

Clear and reliable temperature indicationSide mounting bi-metal thermometers with temperature indication and resettable maximum temperature pointer. Clear indication of temperature with 4" (101 mm) dial. Models can be combined with a well (pocket) to allow units to be replaced without draining or compromising the tank seal. Highly accurate and made of corrosion resistant materials for long, trouble free life.

Features:

• Bi-metal measurement with resettable maximum pointer
• 4 inch (100mm) dial face
• Power is not required for function

Option:

• Various temperature ranges
• Tank connection style, probe length and diameter, compatible well
• Sealed or vented lens

Application:

For temperature indication where the point of measurement (the well or pocket) is on the side of the apparatus and can be easily viewed.