We are offering maxos circular sight glass acc .

the material properties values and small dimensional tolerances are guaranteed by production and quality controls. With these exceptional safety characteristics, maxos safety sight and level gauge glasses can be used under extreme operational conditions.

We are offering spring cones provide proper sealing force to the yarway colour-port water level gauge.

We are offering ilmadur circular sight glass acc.

ilmadur has an enviable reputation for offering high quality, precision-engineered glass products typically used in scientific, advanced engineering and industrial applications, namely: circular sight glasses sight and flow glasses our products are manufactured to exacting international standards to meet safety regulations; this is particularly important in demanding hazardous environments that may involve exposure to high temperatures and or pressures, or chemically corrosive substances.

We are offering retaining ring is a very critical part in the colour-port water level gauge assembly.

We are offering cap screw for yarway colour-port water level gauge. Each cover of the yarway colour-port water level gauge is held solidly against the body by four special cap screws part no. 954181-10.

Glass Type: Fused Quartz / Silica Fused quartz is a result of melting crystalline silica in the form of stone, sand or rock. It is sometimes used in the same applications as fused silica. The main differences are that fused quartz has a much lower OH content and fused silica transmits better in the UV. Both are highly pure, have high chemical resistance, good thermal shock resistance, and low thermal expansion coefficient.

Thermal Properties
Thermal Coefficient of Expansion	(0/300C): 5.5 X 10-7/C
Annealing Point	1213.83C / 2216.9 F
Softening Point	1683C / 3061 F
Strain Point	1122C / 2051.6 F

Mechanical Properties
Density	2.21 g/cm3
Knoop Hardness	>600 Kg/mm2
Young's Modulus	10.5 X 106PSI (70 Gpa)
Poisson's Ratio	.17

Electrical Properties
Dielectric Constant	3.75 @ 20C, 1 MHz
Resistivity	7 X 107ohm * cm (350C)
Dielectric Strength	1270 volts/mil

Aluminosilicate glass is a type of glass that contains aluminum oxide, usually at levels between 20% and 40%. It has several properties that make it suitable for various applications, such as:

High strength and scratch resistance: Aluminosilicate glass is chemically strengthened by an ion exchange process that increases its surface compressive stress and hardness. It is often used for touchscreens and touchscreen protectors12.

Resistance to high temperature: Aluminosilicate glass can withstand temperatures up to 800C and has a high softening point of 1010C. It is comparable to ceramics in terms of thermal resistance12.

Resistance to chemical degradation: Aluminosilicate glass has a low dissolution rate and a high chemical durability. It can resist corrosion and erosion by acids, alkalis, and salts12.

Resistance to thermal shock: Aluminosilicate glass has a low coefficient of thermal expansion, which means it does not expand or contract much when heated or cooled. It can be used as a sealing material for hot systems and equipment12.

There are different types of aluminosilicate glass, depending on their chemical compositions and oxide content. Some examples are alkaline earth aluminosilicate glass, alkali aluminosilicate glass, e-glass, aluminoborosilicate glass, and gorilla glass12. Each type has its own specific properties and applications.

We are offering maxos circular sight glass acc .

the material properties values and small dimensional tolerances are guaranteed by production and quality controls. With these exceptional safety characteristics, maxos safety sight and level gauge glasses can be used under extreme operational conditions.

We are offering spring cones provide proper sealing force to the yarway colour-port water level gauge.

We are offering ilmadur circular sight glass acc.

ilmadur has an enviable reputation for offering high quality, precision-engineered glass products typically used in scientific, advanced engineering and industrial applications, namely: circular sight glasses sight and flow glasses our products are manufactured to exacting international standards to meet safety regulations; this is particularly important in demanding hazardous environments that may involve exposure to high temperatures and or pressures, or chemically corrosive substances.

We are offering retaining ring is a very critical part in the colour-port water level gauge assembly.

We are offering cap screw for yarway colour-port water level gauge. Each cover of the yarway colour-port water level gauge is held solidly against the body by four special cap screws part no. 954181-10.

Glass Type: Fused Quartz / Silica Fused quartz is a result of melting crystalline silica in the form of stone, sand or rock. It is sometimes used in the same applications as fused silica. The main differences are that fused quartz has a much lower OH content and fused silica transmits better in the UV. Both are highly pure, have high chemical resistance, good thermal shock resistance, and low thermal expansion coefficient.

Thermal Properties
Thermal Coefficient of Expansion	(0/300C): 5.5 X 10-7/C
Annealing Point	1213.83C / 2216.9 F
Softening Point	1683C / 3061 F
Strain Point	1122C / 2051.6 F

Mechanical Properties
Density	2.21 g/cm3
Knoop Hardness	>600 Kg/mm2
Young's Modulus	10.5 X 106PSI (70 Gpa)
Poisson's Ratio	.17

Electrical Properties
Dielectric Constant	3.75 @ 20C, 1 MHz
Resistivity	7 X 107ohm * cm (350C)
Dielectric Strength	1270 volts/mil

Aluminosilicate glass is a type of glass that contains aluminum oxide, usually at levels between 20% and 40%. It has several properties that make it suitable for various applications, such as:

High strength and scratch resistance: Aluminosilicate glass is chemically strengthened by an ion exchange process that increases its surface compressive stress and hardness. It is often used for touchscreens and touchscreen protectors12.

Resistance to high temperature: Aluminosilicate glass can withstand temperatures up to 800C and has a high softening point of 1010C. It is comparable to ceramics in terms of thermal resistance12.

Resistance to chemical degradation: Aluminosilicate glass has a low dissolution rate and a high chemical durability. It can resist corrosion and erosion by acids, alkalis, and salts12.

Resistance to thermal shock: Aluminosilicate glass has a low coefficient of thermal expansion, which means it does not expand or contract much when heated or cooled. It can be used as a sealing material for hot systems and equipment12.

There are different types of aluminosilicate glass, depending on their chemical compositions and oxide content. Some examples are alkaline earth aluminosilicate glass, alkali aluminosilicate glass, e-glass, aluminoborosilicate glass, and gorilla glass12. Each type has its own specific properties and applications.