Vicat Needle Apparatus can be availed from us as per the requirement. The Vicat Needle Apparatus is used for determining the normal consistency and setting times of cement and 'a' class limes. It is designed with the use of optimum grade raw material and cutting edge technology in a metallic frame. The Vicat Needle Apparatus bears a freely movable rod with a cap at top, one vicat mold, split type and glass base plate and one set of needles. Our Vicat Needle Apparatus is further appreciated for high reliability, easy usage, supreme quality and elevated durability.

Single cell Concrete Permeability Test Apparatus can be availed from us as per the requirement. It is used for determining the permeability of cement mortar and concrete specimens.  The Concrete Permeability Test Apparatus comprises of a brass gunmetal cell of squares cross section mounted on a stand. The pressure chamber of the instrument is connected to the cell through copper tubing and t-connector mounted on the stand. We provide our Concrete Permeability Test Apparatus with a measuring cylinder 500cc to measure percolated quantity of water. Pressure can also be applied by a pressure airline or by a compressor.

 

Details :

• Available for sample of size 150mm dia x 150mm high
• Available for sample of size 100mm dia x 100mm high

The company has emerged as a prominent Manufacturer and Supplier of Vane Shear Apparatus. The Vane Shear Apparatus is meant for the soft and sensitive soils with shear strength less than 15 KNm². Providing test results through careful control and compression, the Vane Shear Apparatus can work in the laboratory or fields. A small vane is to be pushed in the soil, with the controlled rotation measuring force needed for maximum resistance.

Softening Point App./ Ring & Ball Apparatus that we offer is used for determining the softening point of bituminous materials according to the IP 58 and IS 1205 standards. The softening point is a point of temperature at which the specimen under test becomes soft. Softening Point App./ Ring & Ball Apparatus consists of a heat resistant glass beaker, two ball guides, two tapered brass rings, two steel balls, ring stand and a hand stirrer. Clients can avail Softening Point App./ Ring & Ball Apparatus at affordable rates from us.

The Relative Density Apparatus has a cylindrical mold of 3000-15000 cm³ and the vibratory table is 75mm x 75mm. The Motorized 230 VAC Relative Density Apparatus runs on single phase and there is a guide sleeve with clamp that is meant for the molds. The surcharge base plate of the Relative Density Apparatus can bear the surcharge weight for 3000 and 15000 cm³, and the other components include handle for base plate, dial gauge holder, dial gauge (0.01 mm x 25 mm) and travel with extension piece calibration bar (75 x 300 x 3mm). The company is a major Manufacturer and Supplier of Relative Density Apparatus.

Flash & Fire Point Apparatus is used for determining the flash point and fire point of different petroleum products except fuel oil that has open cup flash below 80^oC. It is suitable for operation on 220 Volts, 50 cycles ad AC Circuits. Our Flash & Fire Point Apparatus consists of a cup, thermometer clip, heating plate to specific dimension, and a test flame attachment along with swivel joint. The heating is controlled with the help of an energy regulator fitted to the apparatus. Avail from us, our Flash & Fire Point Apparatus at competitive rates.

We are a reputed firm engaged in manufacturing and supplying excellent quality Slump Test Apparatus. Slump Test Apparatus is used for determining the consistency of freshly mixed concrete, where the maximum size of the aggregate does not exceed 38mm. The Slump Test Apparatus is designed in the shape of the frustum of a cone, open at both ends. Further, it is applauded for its high reliability, efficiency and durability.

Consists of slump cone fitted with handles and foot pieces in position. Base plate in octagonal shape, Two clamps slide over the foot grips of a standard slump cone and hold It securely while filling and rodding. A combination swivel carrying handle. Complete with graduated tamping rod 0-60 cms long and 16 cms long and 16 mm dia with 0-30 cms.

The permeability of the soil is one of the important aspects to be studied and that can be done through the Soil Permeability Apparatus. As a Manufacturer and Supplier of Soil Permeability Apparatus, we solve a lot of issues. The results of the permeability checks through the Soil Permeability Apparatus help in the groundwater pumping, excavations in foundation sites and dam designing. The Soil Permeability Apparatus can check the pre-formed as well as re-molded samples as well as the undisturbed samples through constant/falling head methods. The permeability studies can provide inputs on saturated compressible soil layer, equifer flow rate, as well as flow of water through interconnected voids.

 

Consists of gunmetal mould 100mm dia X 127.3mm height X 1000ml volume, with collar of 100mm dia X 60mm high and drainage base plate, Drainage cap, Metallic clamping ring, two porous stone for base and cap, Dummy plate, air release valve. With a set of three glass stand pipes approx.6mm, 10mm, and 20mm dia X 1 meter length mounted on a wooden board, the end of the glass tube is serrated to connect rubber tube of 3 meter length with pinch cock.

We are offering efficient and reliable Tar Viscometer Apparatus that is used for determining the viscosity of road oils and cut back bitumen. Our Tar Viscometer Apparatus conforms to the IP-72 and IS 1206 standards. Tar Viscometer Apparatus that we offer consists of SS bath along with cup of 10 mm or 4 mm orifice and sleeve. It also has stirrer with lifting clip and ball. The entire assembly is kept on a suitable stand with leveling screws. Our Tar Viscometer Apparatus is suitable to operate on 220 volts ac mains.

Details :

• Electrical heating with energy regulator control
• Electrical heating with digital indicator and regulator

We are providing reliable and easy-to-use Aggregate Crushing Value Apparatus at very nominal rates. Our Aggregate Crushing Value Apparatus is used for measuring resistance of an aggregate to crushing. Aggregate Crushing Value Apparatus is widely used in various industrial applications. Our Aggregate Crushing Value Apparatus is highly in demand owing to its sturdy construction, reliable performance, accurate results and compact size.

Features :

• Cylindrical Cell : 150±0.5 mm id x 130 to 140 mm height
• Plunger : 148± 0.5 mm id x 100 to 115 mm height
• Base Plate : 200 to 230 mm square x 8 mm thickness
• Tampering Rod : 16 mm dia x 450 to 600 mm length
• Metal Measure : 110± 0.5 mm id x 180± 0.5 mm height

Owing to our up-to-date manufacturing unit and experienced engineers, we are proficient in offering the best quality Compaction Factor Apparatus. The Compaction Factor Apparatus is used for determining the workability of fresh concrete. It is designed with two rigid conical hoppers and a cylinder mounted on a rigid metal frame. Our Compaction Factor Apparatus also features tamping rod of 600 mm long x 16 mm dia. Further, the Compaction Factor Apparatus is acclaimed for its easy usage, high reliability and exceptional durability.

Marshall Stability Test Apparatus is utilized for designing and evaluating bituminous paving mixes. The test is carried out as a routine test program for paving jobs. The test is applicable to hot mix designs that use bitumen and aggregates up to a maximum size of 25mm. Our Marshall Stability Test Apparatus consists of a motorized loading unit with two telescopic pillars and an adjustable cross head. Limit switches are also installed inside in order to control the upward or downward movement of the pillars. The two majors features of Marshall Stability Test Apparatus are density voids analysis and stability. The marshal stability of a particular mix is defined as a maximum load carried by a compacted specimen at a standard test temperature of 60^oC.

The Apparatus Consists Of :

• A loading unit motorized with capacity 5000 kgf with two telescopic pillars and an adjustable cross head
• Limit switches are fitted inside to control upward or downward movement of the pillars.
• On-off reversing switch and indicator lamps are on the front side while a hand wheel to manually move the pillars is on the right.
• The load frame has fixed speed of 5.08cm per minute, operated on 230 volts A.C.
• 1 no. compaction pedal with specimen mold holder
• 2 nos. compaction rammers, 4.5kg weight and free fall 45.7cm
• 1 no. breaking head assembly with provision to fix flow meter
• 3 nos. specimen mold 10.16cm i.d. x 7.6cm high with base plate and extension collar
• 1 no. kit for specimen extraction, consists of one each load transfer bar, steel ball, specimen extracting plate

Accessories :

• Integral type proving ring capacity 3000 kg
• A dial gauge 0.01 x 25mm

Marshall Stability Test Apparatus is utilized for designing and evaluating bituminous paving mixes. The test is carried out as a routine test program for paving jobs. The test is applicable to hot mix designs that use bitumen and aggregates up to a maximum size of 25mm. Our Marshall Stability Test Apparatus consists of a motorized loading unit with two telescopic pillars and an adjustable cross head. Limit switches are also installed inside in order to control the upward or downward movement of the pillars. The two majors features of Marshall Stability Test Apparatus are density voids analysis and stability. The marshal stability of a particular mix is defined as a maximum load carried by a compacted specimen at a standard test temperature of 60oC.

The company has come up as a major Manufacturer and Supplier of Triaxial Shear Test Apparatus. The Triaxial Shear Test Apparatus is meant for the ascertaining of the tri-axial soil shear strength for specimens with 28mm diameter. With a length-to-diameter ratio of 1:2, the Triaxial Shear Test Apparatus comprises of one loading unit for single cell mounting with a capacity of 5 tonnes. There is a motorized load frame, dial gauge bracket, one tri-axial cell for 38 mm dia specimen, stationary bushing, foot pump, rubber hose, dial gauge and high sensitive proving ring. The lateral pressure assembly for the Triaxial Shear Test Apparatus is 0-10kg/cm sq.

The company is known as a prominent Manufacturer and Supplier of CBR Test Apparatus. The CBR Test Apparatus can be handy in the determination of the load carrying capacity in the laboratories. The CBR Test Apparatus comes into play in specific conditions where the in-place density and water content are such that the saturation degree is more than or equal to 80%. The material is without cohesion and is basically coarse grained as well.

Components :

• Load frame (hand operated, motorized, single speed motorized, three speed motorized) capacity 50 KN (5000 kg) with high and low rate of travel of the lead screw
• Mold 150mm internal dia, 175 mm high
• Penetration piston, face dia 50 mm with adjustable bracket for dial gauge
• Circular metal spacer disc, 148 mm dia x 47.7 mm high with detachable handle
• Annular metal weight 2.5 kg, 147 mm dia with 53 mm dia hole
• Slotted metal weight 2.5 kg, 147 mm dia with 53 mm slot
• Perforated plate, 148 mm dia with adjustable stem and lock nut brass
• Metal tripod for dial gauge
• Cutting collar for obtaining sample from field
• Rammer 2.6 kg x 310 mm controlled drop through guide
• Rammer 4.89 kg x 450 mm controlled drop through guide
• Proving ring 5000 kg, equipped with dial gauge
• Strain dial gauge least count 0.01 mm x 25 mm travel

We are a prominent Blaine Air Permeability Apparatus Manufacturer and Supplier based in Delhi. Used for determining the fineness of cement in terms of specific surface, our Blaine Air Permeability Apparatus is a variable flow type air testing instrument. It is precisely designed with permeability cell 12.5mm I.D., manometer 'u' type mounted on stand with a built in stop cock, perforated disc, plunger rubber stopper and 30cm long rubber tube. The Blaine Air Permeability Apparatus is made available with a packet of 12 filter paper discs and a bottle of 100cc dibutyiphthalate liquid at very feasible prices.

Standard Compaction Test apparatus consists one each of compaction mould steel, 100 mm I.D. x 127.3mm height x 1000 cc. volume, complete with collar and base plate. Compaction Rammer is 2.6 kg in weight x 310mm controlled fall.

The Direct Shear Apparatus is inclusive of Loading Unit, Shear Box Assembly, Shear Box Housing and Specimen Cutter as well as a set of weights. Being one of the most trusted Manufacturers and Suppliers of Direct Shear Apparatus, we offer the best grade apparatus that is hand operated. The Direct Shear Apparatus is used to determine the direct shear strength of soil specimens of 60 mm x 60 mm x 25 mm.

Salient Features :

• High sensitivity compression proving ring cap of 200 kg

• Consolidation dia gauge 0.01 mm x 25 mm

• One strain dial gauge 0.01 mm x 25 mm

• One strain dia gauge 0.01mm x 25 mm

• Optional :

  • Additional set of weights for normal stress of 5 kgcm2
  • Soil sampler for 60 mm x 60 mm specimen and test form pad of 50
  • Spares like porous stone for 60 mm x 60 mm size sample in pairs

The in-situ dry density determination for the aggregate-free natural and compact soil with fine grains can be done with the help of Core Cutter Apparatus. Being a Manufacturer and Supplier of Core Cutter Apparatus, we offer a high quality range that has a cylindrical cutter for soil sample extraction with the help of dolley and rammer. The quick calculation of the weight, density, moisture and dry density of the soil makes the Core Cutter Apparatus one of the better options for the laboratory.

Components :

• Cylindrical core cutter made of steel, 127.3 mm long and 100mm internal diameter

• Steel Dolley, 25 mm high with a lip to enable it to be located on top of the core cutter

• Rammer with detachable steel rod

We are a well-known Consolidation Test Apparatus Manufacturer and Supplier based in Delhi. The Consolidation Test Apparatus is used in a uni-dimensional consolidation test which is considered extremely important in soil mechanics. Our Consolidation Test Apparatus comprises of loading unit with maximum capacity of 20 kg/cm sq. Also, it features fixed ring type consolidomenter (Odeometer) cell assembly for testing 60 mm dia x 20 mm thick specimen, perforated pressure pad, channeled base with water inlet and gasket. Further, Consolidation Test Apparatus is provided with all necessary accessories like dial gauge, extension piece, test forms pad and many more. 

Specifications : Set of weights to give a pressure of 10 kg/cm.sq. on 60 mm dia specimen, comprising: 7 Nos. 0.05 kg/sq.cm, 5 Nos. 0.1 kg/sq.cm., 6 Nos. 0.2 kg/sq.cm., 6 Nos. 0.5 kg/sq.cm., and 5 Nos. 1.0 kg/sq.cm.

Accessories :

• Dial Gauge 0.002 mm x 10 mm.
• Extension piece, 40 mm long

Optional Accessories :

• Varying head stand pipe, 50 cm. long with mm.scale
• Fixed ring type of consolidometer (Odeometer) cell assembly for 50 mm dia x 20 mm thick specimens complete with fixed ring guide ring, pair or porous stones, perforated pressure pad, channeled base, gasket and flanged water jacket
• Set of weights to give a pressure of 10 kg/sq.cm., on 50 cm. dia specimens
• Fixed ring type of consolidometer (Odeometer) cell assembly for 70 mm dia x 20 mm thick specimens, complete with accessories as above
• Set of weights to give a pressure of 10 kg/sq.cm., on 70 cm. dia specimens
• Fixed ring type of consolidometer (Odeometer) cell assembly for 100 mm dia x 25 mm thick specimens, complete with accessories as above
• Set of weights to give a pressure of 10 kg/sq.cm., on 100 mm. dia specimens
• SINGLE GANG
• THREE GANG

Vicat Needle Apparatus can be availed from us as per the requirement. The Vicat Needle Apparatus is used for determining the normal consistency and setting times of cement and 'a' class limes. It is designed with the use of optimum grade raw material and cutting edge technology in a metallic frame. The Vicat Needle Apparatus bears a freely movable rod with a cap at top, one vicat mold, split type and glass base plate and one set of needles. Our Vicat Needle Apparatus is further appreciated for high reliability, easy usage, supreme quality and elevated durability.

Single cell Concrete Permeability Test Apparatus can be availed from us as per the requirement. It is used for determining the permeability of cement mortar and concrete specimens.  The Concrete Permeability Test Apparatus comprises of a brass gunmetal cell of squares cross section mounted on a stand. The pressure chamber of the instrument is connected to the cell through copper tubing and t-connector mounted on the stand. We provide our Concrete Permeability Test Apparatus with a measuring cylinder 500cc to measure percolated quantity of water. Pressure can also be applied by a pressure airline or by a compressor.

 

Details :

• Available for sample of size 150mm dia x 150mm high
• Available for sample of size 100mm dia x 100mm high

The company has emerged as a prominent Manufacturer and Supplier of Vane Shear Apparatus. The Vane Shear Apparatus is meant for the soft and sensitive soils with shear strength less than 15 KNm². Providing test results through careful control and compression, the Vane Shear Apparatus can work in the laboratory or fields. A small vane is to be pushed in the soil, with the controlled rotation measuring force needed for maximum resistance.

Softening Point App./ Ring & Ball Apparatus that we offer is used for determining the softening point of bituminous materials according to the IP 58 and IS 1205 standards. The softening point is a point of temperature at which the specimen under test becomes soft. Softening Point App./ Ring & Ball Apparatus consists of a heat resistant glass beaker, two ball guides, two tapered brass rings, two steel balls, ring stand and a hand stirrer. Clients can avail Softening Point App./ Ring & Ball Apparatus at affordable rates from us.

The Relative Density Apparatus has a cylindrical mold of 3000-15000 cm³ and the vibratory table is 75mm x 75mm. The Motorized 230 VAC Relative Density Apparatus runs on single phase and there is a guide sleeve with clamp that is meant for the molds. The surcharge base plate of the Relative Density Apparatus can bear the surcharge weight for 3000 and 15000 cm³, and the other components include handle for base plate, dial gauge holder, dial gauge (0.01 mm x 25 mm) and travel with extension piece calibration bar (75 x 300 x 3mm). The company is a major Manufacturer and Supplier of Relative Density Apparatus.

Flash & Fire Point Apparatus is used for determining the flash point and fire point of different petroleum products except fuel oil that has open cup flash below 80^oC. It is suitable for operation on 220 Volts, 50 cycles ad AC Circuits. Our Flash & Fire Point Apparatus consists of a cup, thermometer clip, heating plate to specific dimension, and a test flame attachment along with swivel joint. The heating is controlled with the help of an energy regulator fitted to the apparatus. Avail from us, our Flash & Fire Point Apparatus at competitive rates.

We are a reputed firm engaged in manufacturing and supplying excellent quality Slump Test Apparatus. Slump Test Apparatus is used for determining the consistency of freshly mixed concrete, where the maximum size of the aggregate does not exceed 38mm. The Slump Test Apparatus is designed in the shape of the frustum of a cone, open at both ends. Further, it is applauded for its high reliability, efficiency and durability.

Consists of slump cone fitted with handles and foot pieces in position. Base plate in octagonal shape, Two clamps slide over the foot grips of a standard slump cone and hold It securely while filling and rodding. A combination swivel carrying handle. Complete with graduated tamping rod 0-60 cms long and 16 cms long and 16 mm dia with 0-30 cms.

The permeability of the soil is one of the important aspects to be studied and that can be done through the Soil Permeability Apparatus. As a Manufacturer and Supplier of Soil Permeability Apparatus, we solve a lot of issues. The results of the permeability checks through the Soil Permeability Apparatus help in the groundwater pumping, excavations in foundation sites and dam designing. The Soil Permeability Apparatus can check the pre-formed as well as re-molded samples as well as the undisturbed samples through constant/falling head methods. The permeability studies can provide inputs on saturated compressible soil layer, equifer flow rate, as well as flow of water through interconnected voids.

 

Consists of gunmetal mould 100mm dia X 127.3mm height X 1000ml volume, with collar of 100mm dia X 60mm high and drainage base plate, Drainage cap, Metallic clamping ring, two porous stone for base and cap, Dummy plate, air release valve. With a set of three glass stand pipes approx.6mm, 10mm, and 20mm dia X 1 meter length mounted on a wooden board, the end of the glass tube is serrated to connect rubber tube of 3 meter length with pinch cock.

We are offering efficient and reliable Tar Viscometer Apparatus that is used for determining the viscosity of road oils and cut back bitumen. Our Tar Viscometer Apparatus conforms to the IP-72 and IS 1206 standards. Tar Viscometer Apparatus that we offer consists of SS bath along with cup of 10 mm or 4 mm orifice and sleeve. It also has stirrer with lifting clip and ball. The entire assembly is kept on a suitable stand with leveling screws. Our Tar Viscometer Apparatus is suitable to operate on 220 volts ac mains.

Details :

• Electrical heating with energy regulator control
• Electrical heating with digital indicator and regulator

We are providing reliable and easy-to-use Aggregate Crushing Value Apparatus at very nominal rates. Our Aggregate Crushing Value Apparatus is used for measuring resistance of an aggregate to crushing. Aggregate Crushing Value Apparatus is widely used in various industrial applications. Our Aggregate Crushing Value Apparatus is highly in demand owing to its sturdy construction, reliable performance, accurate results and compact size.

Features :

• Cylindrical Cell : 150±0.5 mm id x 130 to 140 mm height
• Plunger : 148± 0.5 mm id x 100 to 115 mm height
• Base Plate : 200 to 230 mm square x 8 mm thickness
• Tampering Rod : 16 mm dia x 450 to 600 mm length
• Metal Measure : 110± 0.5 mm id x 180± 0.5 mm height

Owing to our up-to-date manufacturing unit and experienced engineers, we are proficient in offering the best quality Compaction Factor Apparatus. The Compaction Factor Apparatus is used for determining the workability of fresh concrete. It is designed with two rigid conical hoppers and a cylinder mounted on a rigid metal frame. Our Compaction Factor Apparatus also features tamping rod of 600 mm long x 16 mm dia. Further, the Compaction Factor Apparatus is acclaimed for its easy usage, high reliability and exceptional durability.

Marshall Stability Test Apparatus is utilized for designing and evaluating bituminous paving mixes. The test is carried out as a routine test program for paving jobs. The test is applicable to hot mix designs that use bitumen and aggregates up to a maximum size of 25mm. Our Marshall Stability Test Apparatus consists of a motorized loading unit with two telescopic pillars and an adjustable cross head. Limit switches are also installed inside in order to control the upward or downward movement of the pillars. The two majors features of Marshall Stability Test Apparatus are density voids analysis and stability. The marshal stability of a particular mix is defined as a maximum load carried by a compacted specimen at a standard test temperature of 60^oC.

The Apparatus Consists Of :

• A loading unit motorized with capacity 5000 kgf with two telescopic pillars and an adjustable cross head
• Limit switches are fitted inside to control upward or downward movement of the pillars.
• On-off reversing switch and indicator lamps are on the front side while a hand wheel to manually move the pillars is on the right.
• The load frame has fixed speed of 5.08cm per minute, operated on 230 volts A.C.
• 1 no. compaction pedal with specimen mold holder
• 2 nos. compaction rammers, 4.5kg weight and free fall 45.7cm
• 1 no. breaking head assembly with provision to fix flow meter
• 3 nos. specimen mold 10.16cm i.d. x 7.6cm high with base plate and extension collar
• 1 no. kit for specimen extraction, consists of one each load transfer bar, steel ball, specimen extracting plate

Accessories :

• Integral type proving ring capacity 3000 kg
• A dial gauge 0.01 x 25mm

Marshall Stability Test Apparatus is utilized for designing and evaluating bituminous paving mixes. The test is carried out as a routine test program for paving jobs. The test is applicable to hot mix designs that use bitumen and aggregates up to a maximum size of 25mm. Our Marshall Stability Test Apparatus consists of a motorized loading unit with two telescopic pillars and an adjustable cross head. Limit switches are also installed inside in order to control the upward or downward movement of the pillars. The two majors features of Marshall Stability Test Apparatus are density voids analysis and stability. The marshal stability of a particular mix is defined as a maximum load carried by a compacted specimen at a standard test temperature of 60oC.

The company has come up as a major Manufacturer and Supplier of Triaxial Shear Test Apparatus. The Triaxial Shear Test Apparatus is meant for the ascertaining of the tri-axial soil shear strength for specimens with 28mm diameter. With a length-to-diameter ratio of 1:2, the Triaxial Shear Test Apparatus comprises of one loading unit for single cell mounting with a capacity of 5 tonnes. There is a motorized load frame, dial gauge bracket, one tri-axial cell for 38 mm dia specimen, stationary bushing, foot pump, rubber hose, dial gauge and high sensitive proving ring. The lateral pressure assembly for the Triaxial Shear Test Apparatus is 0-10kg/cm sq.

The company is known as a prominent Manufacturer and Supplier of CBR Test Apparatus. The CBR Test Apparatus can be handy in the determination of the load carrying capacity in the laboratories. The CBR Test Apparatus comes into play in specific conditions where the in-place density and water content are such that the saturation degree is more than or equal to 80%. The material is without cohesion and is basically coarse grained as well.

Components :

• Load frame (hand operated, motorized, single speed motorized, three speed motorized) capacity 50 KN (5000 kg) with high and low rate of travel of the lead screw
• Mold 150mm internal dia, 175 mm high
• Penetration piston, face dia 50 mm with adjustable bracket for dial gauge
• Circular metal spacer disc, 148 mm dia x 47.7 mm high with detachable handle
• Annular metal weight 2.5 kg, 147 mm dia with 53 mm dia hole
• Slotted metal weight 2.5 kg, 147 mm dia with 53 mm slot
• Perforated plate, 148 mm dia with adjustable stem and lock nut brass
• Metal tripod for dial gauge
• Cutting collar for obtaining sample from field
• Rammer 2.6 kg x 310 mm controlled drop through guide
• Rammer 4.89 kg x 450 mm controlled drop through guide
• Proving ring 5000 kg, equipped with dial gauge
• Strain dial gauge least count 0.01 mm x 25 mm travel

We are a prominent Blaine Air Permeability Apparatus Manufacturer and Supplier based in Delhi. Used for determining the fineness of cement in terms of specific surface, our Blaine Air Permeability Apparatus is a variable flow type air testing instrument. It is precisely designed with permeability cell 12.5mm I.D., manometer 'u' type mounted on stand with a built in stop cock, perforated disc, plunger rubber stopper and 30cm long rubber tube. The Blaine Air Permeability Apparatus is made available with a packet of 12 filter paper discs and a bottle of 100cc dibutyiphthalate liquid at very feasible prices.

Standard Compaction Test apparatus consists one each of compaction mould steel, 100 mm I.D. x 127.3mm height x 1000 cc. volume, complete with collar and base plate. Compaction Rammer is 2.6 kg in weight x 310mm controlled fall.

The Direct Shear Apparatus is inclusive of Loading Unit, Shear Box Assembly, Shear Box Housing and Specimen Cutter as well as a set of weights. Being one of the most trusted Manufacturers and Suppliers of Direct Shear Apparatus, we offer the best grade apparatus that is hand operated. The Direct Shear Apparatus is used to determine the direct shear strength of soil specimens of 60 mm x 60 mm x 25 mm.

Salient Features :

• High sensitivity compression proving ring cap of 200 kg

• Consolidation dia gauge 0.01 mm x 25 mm

• One strain dial gauge 0.01 mm x 25 mm

• One strain dia gauge 0.01mm x 25 mm

• Optional :

  • Additional set of weights for normal stress of 5 kgcm2
  • Soil sampler for 60 mm x 60 mm specimen and test form pad of 50
  • Spares like porous stone for 60 mm x 60 mm size sample in pairs

The in-situ dry density determination for the aggregate-free natural and compact soil with fine grains can be done with the help of Core Cutter Apparatus. Being a Manufacturer and Supplier of Core Cutter Apparatus, we offer a high quality range that has a cylindrical cutter for soil sample extraction with the help of dolley and rammer. The quick calculation of the weight, density, moisture and dry density of the soil makes the Core Cutter Apparatus one of the better options for the laboratory.

Components :

• Cylindrical core cutter made of steel, 127.3 mm long and 100mm internal diameter

• Steel Dolley, 25 mm high with a lip to enable it to be located on top of the core cutter

• Rammer with detachable steel rod

We are a well-known Consolidation Test Apparatus Manufacturer and Supplier based in Delhi. The Consolidation Test Apparatus is used in a uni-dimensional consolidation test which is considered extremely important in soil mechanics. Our Consolidation Test Apparatus comprises of loading unit with maximum capacity of 20 kg/cm sq. Also, it features fixed ring type consolidomenter (Odeometer) cell assembly for testing 60 mm dia x 20 mm thick specimen, perforated pressure pad, channeled base with water inlet and gasket. Further, Consolidation Test Apparatus is provided with all necessary accessories like dial gauge, extension piece, test forms pad and many more. 

Specifications : Set of weights to give a pressure of 10 kg/cm.sq. on 60 mm dia specimen, comprising: 7 Nos. 0.05 kg/sq.cm, 5 Nos. 0.1 kg/sq.cm., 6 Nos. 0.2 kg/sq.cm., 6 Nos. 0.5 kg/sq.cm., and 5 Nos. 1.0 kg/sq.cm.

Accessories :

• Dial Gauge 0.002 mm x 10 mm.
• Extension piece, 40 mm long

Optional Accessories :

• Varying head stand pipe, 50 cm. long with mm.scale
• Fixed ring type of consolidometer (Odeometer) cell assembly for 50 mm dia x 20 mm thick specimens complete with fixed ring guide ring, pair or porous stones, perforated pressure pad, channeled base, gasket and flanged water jacket
• Set of weights to give a pressure of 10 kg/sq.cm., on 50 cm. dia specimens
• Fixed ring type of consolidometer (Odeometer) cell assembly for 70 mm dia x 20 mm thick specimens, complete with accessories as above
• Set of weights to give a pressure of 10 kg/sq.cm., on 70 cm. dia specimens
• Fixed ring type of consolidometer (Odeometer) cell assembly for 100 mm dia x 25 mm thick specimens, complete with accessories as above
• Set of weights to give a pressure of 10 kg/sq.cm., on 100 mm. dia specimens
• SINGLE GANG
• THREE GANG