SGFCT Louvres Are Made Up Of Asbestos Sheets Or Frp Sheets. It Serves Two Purposes. One Is To Retain Circulating Water Within The Tower, And Other Is To Equally Distribute The Air Flow Into The Fill

Sgct Manufactures Screw Shank Nails In Stainless Steel Grade. The Sizes Vary From 1” To 4” In Length & 16’ To 10’ Wire Gauge In Diameter. Sgct Also Manufacture U Nails. The Nails Are Mainly Used For Wooden Cooling Tower To Fix Wire Grids Sgct Also Offers Ss Self Drilling Screws and Tapping With Neoprene Washers In 1” 1 ½” , 2” And 2 ½” Sizes, These Are Used Mainly To Fix Frp Casing And Louvers In Pultruded Frp Cooling Towers.

Cooling Tower Fill Is The Main Heat Transfer Area Available For Heat Transfer From Hot Water To Cold Air. The Splash Fills Disintegrates The Hot Water From The Vertical Direction And It Splits The Water To Pass Through Next Level Of Splash Bars. Fills Are Normally Made Of Pvc, Wood.

The Raw Material I.E. Frp And Aluminium Provides The Desired Non-Corrosive Quality To The Fan Blades, Resulting In The Operation Of Fans Even In The Chemical Environment. Frp Is Lightweight Material Which Ensures Low Moment Of Inertia, Minimum Wear & Tear Of Motor, Bearing And Drive System.

Detail : The Basic Purpose Of Fan Is To Move A Mass Of Gas Or Vapor At The Desired Velocity. For Achieving This Objective, There Is Slight Increase In The Gas Pressure Across The Fan Impeller. Sgct Manufacture Fans With Fan Blade Choice Of Correct Twist And Of Special Airfoil Sections To Reduce Compressibility Losses.

Fan Deck Provides A Platform For The Support Of The Fan Cylinders And Acts As An Access Way To The Fan And Water Distribution System

This is due to our cordial associations with the logistic companies that we are able to reach any preferred Mumbai(India) with ease, thus meeting the delivery schedule. With the complete help and support of our team members and management, we conduct strict checking on the quality of raw inputs used for manufacturing.

We Sgct Manufacturing The Gear Box Single & Double Reduction Which Depend Upon The Motor Capacity In Kw(Hp)

Single Reduction : One Reduction Ranges From Ratios Of 2:1 To 5.5:1. Power Ranges From 7 Hp (5.2 Kw)  Up To 60 Hp

Double Reduction : Double Reduction Gearbox Is The Perfect Choice. Reduction Ratios Range From 7.5:1 To Over 20:1. Power Ratings Start At 60 Hp (45 Kw) And Exceed 500 Hp (375 Kw).

Sgct Manufactures Screw Shank Nails In Stainless Steel Grade. The Sizes Vary From 1” To 4” In Length & 16’ To 10’ Wire Gauge In Diameter. Sgct Also Manufacture U Nails. The Nails Are Mainly Used For Wooden Cooling Tower To Fix Wire Grids SgctAlso Offers Ss Self Drilling Screws and Tapping With Neoprene Washers In 1” 1 ½” , 2” And 2 ½” Sizes, These Are Used Mainly To Fix Frp Casing And Louvers In Pultruded Frp Cooling Towers.

We Sgct Manufacturing Various Types Of Nozzle As Per Requirement & Base Upon Design, Pressure Required

Sgct Drive Shaft Assemblies Are Available In Hdg, Ss 304, & Carbon Composite Fibre Design To Transmit High Torque Rating For Cooling Tower Applications. Drive Shaft Are Single Span & Flexible To Compensate For Any Misalignment. All Drive Shaft Components Are Completely Inter Changeable & Its Design Through Ansi /AGMA 9000- D11

Turbo Splash Modular Splash Fill Assemblies Feature Hinged Panels That Can Be Installed In Both Counter Flow And Cross Flow Cooling Tower Applications. Turbo Splash Was Designed For High Thermal Performance Where Poor Water Quality Does Not Permit The Use Of Film Fills. Each Unit Can Be Accordion-Folded Into A Compact Bundle For Efficient, Cost-Effective Storage And Shipping And Then Unfolded In The Tower For Easy Installation

Temperature : Stand Upto 85 Degree Celsius And Its Non-Clogging

We Sgct Manufacturing All Types Of Distribution System Like Hot Dip Galvinse, Pvc, Frp , PVC Lateral Pipe & And We Design As Per Water Capacity With Lateral Pipe With This We Offer To Our Client Flow Control Valve.

We Sgct Manufacturing The Torque Tupe Or Baseframe Unitized Supports Gives Permanent Alignment Of The Motor, Driveshaft & Gear Reducer. Torque Tube Type And Channel Base Frame Can Be Used For Both Cross Flow And Counter Flow Cooling Towers.Normally The Mechanical Supports/Base Frames Are Made Out Of Hot Dip Galvanized Steel. Stainless Steel Of 304 Or 316 Grade Are Manufactured Upon Request.

We are capable of delivering the orders on time and at any desired Mumbai(India) as we are supported by up-to-the-minute facilities. We inspect each and every element of the raw material that that helps us in delivering qualitative products. Under the vigil supervision of professionals, we conduct quality examinations to ensure that the range is free from defects.

We source direct as well as indirect raw materials only from the certified vendors present in the market. Our team of quality experts strictly checks the entire range against varied parameters. We efficiently cater to the varied demands of the clients and offer them personalized packaging options as well. We ensure that the products are packed sternly using quality packaging material to evade loss.

we sgct manufacturing pvc fills optimally designed to achieve (with both edges folded) high surface area for given volume pvc fills are made by continuous forming and offer minimum resistance to airflow, providing more cooling by lower power consumption. they have uniform thickness throughout. durable folded edges provide, strength at critical locations on the fill. the fills are easy to glue at site thus saving on transportation costs

details :

• 12 mm flute size
• 17 mm flute size
• 19 mm flute size
• 27mm flute size
• 32-27 mm flute size
• and the length, width & height are coming according to client requirement

SGFCT Louvres Are Made Up Of Asbestos Sheets Or Frp Sheets. It Serves Two Purposes. One Is To Retain Circulating Water Within The Tower, And Other Is To Equally Distribute The Air Flow Into The Fill

Sgct Manufactures Screw Shank Nails In Stainless Steel Grade. The Sizes Vary From 1” To 4” In Length & 16’ To 10’ Wire Gauge In Diameter. Sgct Also Manufacture U Nails. The Nails Are Mainly Used For Wooden Cooling Tower To Fix Wire Grids Sgct Also Offers Ss Self Drilling Screws and Tapping With Neoprene Washers In 1” 1 ½” , 2” And 2 ½” Sizes, These Are Used Mainly To Fix Frp Casing And Louvers In Pultruded Frp Cooling Towers.

Cooling Tower Fill Is The Main Heat Transfer Area Available For Heat Transfer From Hot Water To Cold Air. The Splash Fills Disintegrates The Hot Water From The Vertical Direction And It Splits The Water To Pass Through Next Level Of Splash Bars. Fills Are Normally Made Of Pvc, Wood.

The Raw Material I.E. Frp And Aluminium Provides The Desired Non-Corrosive Quality To The Fan Blades, Resulting In The Operation Of Fans Even In The Chemical Environment. Frp Is Lightweight Material Which Ensures Low Moment Of Inertia, Minimum Wear & Tear Of Motor, Bearing And Drive System.

Detail : The Basic Purpose Of Fan Is To Move A Mass Of Gas Or Vapor At The Desired Velocity. For Achieving This Objective, There Is Slight Increase In The Gas Pressure Across The Fan Impeller. Sgct Manufacture Fans With Fan Blade Choice Of Correct Twist And Of Special Airfoil Sections To Reduce Compressibility Losses.

Fan Deck Provides A Platform For The Support Of The Fan Cylinders And Acts As An Access Way To The Fan And Water Distribution System

This is due to our cordial associations with the logistic companies that we are able to reach any preferred Mumbai(India) with ease, thus meeting the delivery schedule. With the complete help and support of our team members and management, we conduct strict checking on the quality of raw inputs used for manufacturing.

We Sgct Manufacturing The Gear Box Single & Double Reduction Which Depend Upon The Motor Capacity In Kw(Hp)

Single Reduction : One Reduction Ranges From Ratios Of 2:1 To 5.5:1. Power Ranges From 7 Hp (5.2 Kw)  Up To 60 Hp

Double Reduction : Double Reduction Gearbox Is The Perfect Choice. Reduction Ratios Range From 7.5:1 To Over 20:1. Power Ratings Start At 60 Hp (45 Kw) And Exceed 500 Hp (375 Kw).

Sgct Manufactures Screw Shank Nails In Stainless Steel Grade. The Sizes Vary From 1” To 4” In Length & 16’ To 10’ Wire Gauge In Diameter. Sgct Also Manufacture U Nails. The Nails Are Mainly Used For Wooden Cooling Tower To Fix Wire Grids SgctAlso Offers Ss Self Drilling Screws and Tapping With Neoprene Washers In 1” 1 ½” , 2” And 2 ½” Sizes, These Are Used Mainly To Fix Frp Casing And Louvers In Pultruded Frp Cooling Towers.

We Sgct Manufacturing Various Types Of Nozzle As Per Requirement & Base Upon Design, Pressure Required

Sgct Drive Shaft Assemblies Are Available In Hdg, Ss 304, & Carbon Composite Fibre Design To Transmit High Torque Rating For Cooling Tower Applications. Drive Shaft Are Single Span & Flexible To Compensate For Any Misalignment. All Drive Shaft Components Are Completely Inter Changeable & Its Design Through Ansi /AGMA 9000- D11

Turbo Splash Modular Splash Fill Assemblies Feature Hinged Panels That Can Be Installed In Both Counter Flow And Cross Flow Cooling Tower Applications. Turbo Splash Was Designed For High Thermal Performance Where Poor Water Quality Does Not Permit The Use Of Film Fills. Each Unit Can Be Accordion-Folded Into A Compact Bundle For Efficient, Cost-Effective Storage And Shipping And Then Unfolded In The Tower For Easy Installation

Temperature : Stand Upto 85 Degree Celsius And Its Non-Clogging

We Sgct Manufacturing All Types Of Distribution System Like Hot Dip Galvinse, Pvc, Frp , PVC Lateral Pipe & And We Design As Per Water Capacity With Lateral Pipe With This We Offer To Our Client Flow Control Valve.

We Sgct Manufacturing The Torque Tupe Or Baseframe Unitized Supports Gives Permanent Alignment Of The Motor, Driveshaft & Gear Reducer. Torque Tube Type And Channel Base Frame Can Be Used For Both Cross Flow And Counter Flow Cooling Towers.Normally The Mechanical Supports/Base Frames Are Made Out Of Hot Dip Galvanized Steel. Stainless Steel Of 304 Or 316 Grade Are Manufactured Upon Request.

We are capable of delivering the orders on time and at any desired Mumbai(India) as we are supported by up-to-the-minute facilities. We inspect each and every element of the raw material that that helps us in delivering qualitative products. Under the vigil supervision of professionals, we conduct quality examinations to ensure that the range is free from defects.

We source direct as well as indirect raw materials only from the certified vendors present in the market. Our team of quality experts strictly checks the entire range against varied parameters. We efficiently cater to the varied demands of the clients and offer them personalized packaging options as well. We ensure that the products are packed sternly using quality packaging material to evade loss.

we sgct manufacturing pvc fills optimally designed to achieve (with both edges folded) high surface area for given volume pvc fills are made by continuous forming and offer minimum resistance to airflow, providing more cooling by lower power consumption. they have uniform thickness throughout. durable folded edges provide, strength at critical locations on the fill. the fills are easy to glue at site thus saving on transportation costs

details :

• 12 mm flute size
• 17 mm flute size
• 19 mm flute size
• 27mm flute size
• 32-27 mm flute size
• and the length, width & height are coming according to client requirement