S.A.Industries

Magadi Road, Bangalore, Karnataka

Lifting tongs for different applications will be designed with stress analysis carried out Ansys for different capacity and size of the ingots. The main load bearing links and lifting bail plate fabricated with high tensile SAILMA 350 HI plate and duly stress relieved after full welding.

Suitable auto gravity latch type lock provided at top for opening & closing of the main link jaws during lifting of the cold or hot jobs with extra safety. All the hinge pins made out of EN8/C45 which is housed in gun metal bushes.Special alloy material with serrations provided at job gripping point on main link ends.

Coil/Sheet bundle/blooms & ingot transfer cars will be generally designed with motorized/battery operated or winch driven as per customer choisce.Generally cars will be fabricated with reputed quality structural steel sections or sheets and duly stress relieved after full welding and fabrication. Suitable HDPE/Alu linear pads provided on V Saddle to avoid damage or scratches of coil contact surface while handling.Hootar/Blinker, Limit switch will be provide on the car. The car will be finished with two coats of golden yellow synthetic enamel paint on two coats of yellow primer.

Coil/Sheet bundle/blooms & ingot transfer cars will be generally designed with motorized/battery operated or winch driven as per customer choisce.Generally cars will be fabricated with reputed quality structural steel sections or sheets and duly stress relieved after full welding and fabrication. Suitable HDPE/Alu linear pads provided on V Saddle to avoid damage or scratches of coil contact surface while handling.Hootar/Blinker, Limit switch will be provide on the car. The car will be finished with two coats of golden yellow synthetic enamel paint on two coats of yellow primer.

Coil Hooks, also referred to as C-Hooks, are available in a variety of styles and offer versatility in the way you handle your product. The Close Stacking C-Hook (CSC) has a shorter upper arm which gives the lifter the ability to handle coils of various widths that are flush against a vertical surface. The Slit Coil C-Hook (SCC) has a longer lift arm which allows the lifter to lift multiple coils. The combined widths of the coils are equal to the maximum coil width of the lifter. Radius in corners reduces stress concentrations in critical areas without interfering with the object being lifted. Integral lift loop reduces headroom and requires less maintenance than conventional welded lift loops. Arc top better suits the contour of the ID of a coil which prevents sharp edges from damaging the product. Guide handles allow the lifter to be easily maneuvered. Counterweight balances and hangs the lifter, both empty and loaded.

Belt conveyors are the most commonly used powered conveyor due to their economical cost and simplicity. They are very versatile in what products they can transport. Typically, belt conveyors are used to carry loads over long distances with a single AC drive motor. They can also be used to convey products to different elevations (incline or decline) Roller conveyor encompasses many designs for a wide variety of applications. Roller conveyor can be used to simply transport product from point A to B. This is commonly referred to as live roller conveyor. Roller conveyor can also be used to accumulate product with minimum or zero pressure. It can also be used to convey large heavy loads such as pallets with chain driven roller.

New patented Wire Mesh Bins are an industry exclusive. Our innovative mesh design offers a nickel-chrome finish and a 3/8 x 3/8 grid pattern allowing complete visibility of the bins contents. This unique mesh pattern provides a dust and dirt free storage environment. Ultra strong design allows for superior hang capacity perfect for IV fluid storage or anything where hang capacities are vital. Available in 9 popular sizes, Quantums Mesh Bins have a rear hanger that allows them to hang from any louvered wall panel or rail system. Optional side hangers (sold separately) allow bins stack one on top of the other. The open hopper design allows for easy picking while allowing visual access to stored contents. Two optional label holders are available for all Mesh Bins.

This type of motorizedHydraulic Scissor Lift table will be used to lift the dies or any materials from ground to required height. The loading bearing links will be fabricated with SAILMA 350H1 plates or with HT tubular sections duly stress relieved after full welding. The hyd. cylinder, powerpack & fittings will be of reputed make only. For safety hooter blinker and interlock valves are provided. This type of equipment's can be designed stationary or mobile with top bed flat/rollers with 360o rotating system. The equipment will be finished with two coats of golden yellow synthetic paint on two coats of primer with black zebra stripes.