Our Products
Laboratory Mixers
2 Products availableViscosity Instruments
2 Products availableSeparators & Strainers
2 Products availableWe offer the best product range of Anemometer Robinson - Cup Type, Balance - Pan Type With Set Of Weights 5 Kg, sun shine recorder, Field Vane Shear App and Lab Concrete Mixer Manually Operated.
Stop Watch Mechanical 1/10 Seconds Seconds L.C. Stopwatches feature shock absorbers on the balance wheel, temperature-compensated hairspring, and unbreakable mainsprings. Movements are antimagnetic and shock resistant. Easy-to-read numbers are clearly visible. Watches with a single button that starts, stops, and resets the watch.
Stop Watch Electronic LCD Digital 1/100Sec LC Show hour, minute, second, AM/PM indicator, month, data, and day of the week You can select 12 or 24 hour user with this chronograph.
Consists of a glass jar with metal cone, locking ring and rubber seal.
Capacity with Price
Very good quality with fine nylon hair and wooden handle.
BALL MILL (Laboratory Type)
For mixing and grinding electrically operated capacity of a few grams to 1.0 kg. And 2.0 kg. Fitted with PMDC Geared motor. The unit drives with maximum speed 80 RPM, The jar is made of SS, having steel balls of different sizes to be fixed in a jar for mixing and grinding of pesticides powder. The jar is interchangeable and easily removable (Up to 5 Kg) light weight and compact unit. To work on 220 volts A.C. Main. complete with 0-60 mts timer
Price Details
1 Kg Jar F.H.P Motor | Rs.22600/- |
2 Kg Jar F.H.P. Motor | Rs.26500/- |
5 Kg Jar ¼ H.P. Motor | Rs.58000/- |
10 kg jar with motor | Rs.74700/- |
20 kg jar with motor | Rs.133000/- |
We can manufacture Lead Sheet of any dimension and composition as per the specification. Its uniform density, stability, eases of fabrication, high degree of flexibility in application, and its availability at reasonable cost are assured
Technical Details
Thickmess | Weight Appx. |
---|---|
0.5mm | 0.700 Kg per Sq ft |
1.0mm | 1.250 Kg per Sq ft |
1.5mm | 1.700 Kg per Sq ft |
2.0mm | 2.250 Kg per Sq ft |
3.0mm | 3.350 Kg per Sq ft |
details:
Rubber Membrane for Triaxial Test :
SOUTH Digital Theodolite 2 accuracy in box with standard accessories. ET-02
Green Seeker handheld crop sensor is an affordable, easy-to-use measurement device that can be used to assess the health — or vigor — of a crop in order to make better nutrient management decisions on your farm.
Use the GreenSeeker handheld to instantly take a reading of your crop’s health. Readings can be used to make non-subjective decisions regarding the amount of fertiliser to be applied to your crop, resulting in more efficient use of fertiliser — a benefit to your bottom line and the environment.
New Bluetooth connectivity now allows data collection with the mobile devices you already own. Simply download the app of your choice and connect your phone or tablet to the sensor via Bluetooth to record and save data for future analysis.
How Does It Work?
Soil Hydrometer Seamless, symmetrical stem and bulb do not vary in diameter. One-piece ballast is secured to lower part of the body. Guaranteed calibration accuracy eliminates errors due to variable dilution. H-4242 uses ASTM 151 H scale, graduated to read specific gravity with a range of 0.995 to 1.038 in 0.001 divisions at 68°F (20°C). Total length: 11" (280mm). Complies with ASTM D422; AASHTO T88.
saybolt viscometer used for determining the viscosity of petroleum products and lubricants. viscosity is measured by determining the time taken by 60 cc of the material to flow through a specified orifice.
general description & specifications :
the apparatus consists of stainless steel bath with oil cup which is centrally placed in a water bath. the bath has a lid which contains a water cooling tube, two handles with two stirring blades, thermometer socket and a straight heater. stirring is done by turntable arrangement. a thermometer can also be inserted into the cup cover. two jets one universal and one furol can be screwed to the cup by a handle (without strainer, withdrawal tube and glassware) the temperature is controlled by energy regulator or voltage varrier. (extra cost) suitable to work on 220v, 50 hz, ac single phase.
optional accessories :
AUTO LEVEL With stand & Staff
South Auto Level 24/28X magnification with accessories
Aspirator Bottles are made of polypropylene and are therefore much lighter than glass. These are autoclavable, dependable & durable. The leakproof spigot screwed to the bottle body requires only a half turn to open or close. These bottles are used for storing or dispensing distilled water & other laboratory solutions. Threads should be totally disengaged before autoclaving.
Price Details
2 Ltrs. | 1 Pc | 460/- |
5 Ltrs. | 1 Pc | 600/- |
10 Ltrs. | 1 Pc | 1070/- |
20 Ltrs. | 1 Pc | 1520/- |
Standard test sieves Conforming to specifications and tolerance in accordance to I.S. 460 for fine materials made out of 20cm diam spun type joint less polished SS frame easily fit on each other equipped with MS punch sheet(4.75 & above)/& stainless steel wire mesh aperture size below 4.75mm.
Aperture Size With Price
12.5mm, | Rs.750/- |
10mm, | Rs.750/- |
6.3mm, | Rs.750/- |
5.60mm, | Rs.750/- |
4.75mm, | Rs.750/- |
4.0mm, | Rs.750/- |
3.35mm, | Rs.750/- |
2.80mm, | Rs.750/- |
2.36mm, | Rs.750/- |
2.0mm, | Rs.750/- |
1.70mm, | Rs.750/- |
1.40mm, | Rs.750/- |
1.18mm, | Rs.750/- |
1.0mm, | Rs.750/- |
850 mic, | Rs.750/- |
710 mic, | Rs.750/- |
600 mic, | Rs.750/- |
500 mic, | Rs.750/- |
425 mic, | Rs.750/- |
355 mic, | Rs.750/- |
300 mic, | Rs.750/- |
250 mic, | Rs.750/- |
212 mic, | Rs.750/- |
180 mic | Rs.750/- |
150 mic. | Rs.750/- |
125mic | Rs.780/- |
106 mic | Rs.800/- |
90mic | Rs.830/- |
75 mic | Rs.850/- |
63mic | Rs.880/- |
53 mic | Rs.920/- |
45 mic | Rs.970/- |
40 mic | Rs.1010/- |
38 mic | Rs.1150/- |
35 mic | Rs.1550/- |
25 mic | Rs.1750/- |
20 mic | Rs.3900/- |
15 mic | Rs.6500/- |
12 mic | Rs.8000/- |
10 mic | Rs.9000/- |
05 mic | Rs.12000/- |
Price Details
Dia 2” | Appx ½ Kg | Rs.450/- |
Dia 2½” | Appx 1 Kg | Rs.650/- |
Dia 3” | Appx 1½ Kg | Rs.950/- |
Dia 4” | Appx 2 Kg | Rs.1150/- |
Dia 4½” | Appx 3 Kg | Rs.1500/- |
Dia 5” | Appx 4 Kg | Rs.1700 |
300 mm dia GI sieves 200mm to 2.36mm
450 mm dia GI sieves 200mm to 2.36mm
200 mm dia Brass frame sieves 25mm to 5 microns
Aperture Size (300mm Diam G.I. Frame )
125mm, | Rs 350/- |
100mm, | Rs 350/- |
90mm, | Rs 350/- |
80mm, | Rs 350/- |
75mm, | Rs 350/- |
63mm, | Rs 350/- |
53mm, | Rs 350/- |
50mm, | Rs 350/- |
45mm, | Rs 350/- |
40mm, | Rs 350/- |
37.5mm, | Rs 350/- |
31.5mm, | Rs 350/- |
26.5mm, | Rs 350/- |
25mm, | Rs 350/- |
22.4mm, | Rs 350/- |
20mm, | Rs 350/- |
19.0mm, | Rs 350/- |
16,0mm, | Rs 350/- |
14mm, | Rs 350/- |
12.5mm, | Rs 350/- |
10mm, | Rs 350/- |
9.5mm, | Rs 350/- |
8mm, | Rs 350/- |
6.3mm, | Rs 350/- |
4.75mm | Rs 350/- |
lid and pan. | Rs 350/- |
Aperture Size (45cm Diam G.I. Frame )
125mm, | Rs.450/- |
100mm, | Rs.450/- |
90mm, | Rs.450/- |
80mm, | Rs.450/- |
75mm, | Rs.450/- |
63mm, | Rs.450/- |
53mm, | Rs.450/- |
50mm, | Rs.450/- |
45mm, | Rs.450/- |
40mm, | Rs.450/- |
37.5mm, | Rs.450/- |
31.5mm, | Rs.450/- |
26.5mm, | Rs.450/- |
25mm, | Rs.450/- |
22.4mm, | Rs.450/- |
20mm, | Rs.450/- |
19.0mm, | Rs.450/- |
16,0mm, | Rs.450/- |
14mm, | Rs.450/- |
12.5mm, | Rs.450/- |
10mm, | Rs.450/- |
9.5mm, | Rs.450/- |
8mm, | Rs.450/- |
6.3mm, | Rs.450/- |
4.75mm | Rs.450/- |
lid and pan. | Rs.450/- |
Aperture Size (Polished Brass Frame )
12.5mm, | Rs.480/- |
10mm, | Rs.480/- |
6.3mm, | Rs.480/- |
5.60mm, | Rs.480/- |
4.75mm, | Rs.480/- |
4.0mm, | Rs.480/- |
3.35mm, | Rs.480/- |
2.80mm, | Rs.480/- |
2.36mm, | Rs.480/- |
2.0mm, | Rs.480/- |
1.70mm, | Rs.480/- |
1.40mm, | Rs.480/- |
1.18mm, | Rs.480/- |
1.0mm, | Rs.480/- |
850 mic, | Rs.480/- |
710 mic, | Rs.480/- |
600 mic, | Rs.480/- |
500 mic, | Rs.480/- |
425 mic, | Rs.480/- |
355 mic, | Rs.480/- |
300 mic, | Rs.480/- |
250 mic, | Rs.480/- |
212 mic, | Rs.480/- |
180 mic | Rs.480/- |
150 mic. | Rs.480/- |
125mic | Rs.500/- |
106 mic | Rs.530/- |
90mic | Rs.570/- |
75 mic | Rs.600/- |
63mic | Rs.640/- |
53 mic | Rs.690/- |
45 mic | Rs.810/- |
37 mic | Rs.1100/- |
32 mic | Rs.1600/- |
25 mic | Rs.1900/- |
20 mic | Rs.2800/- |
15 mic | Rs.5100/- |
10 mic | Rs.7300/- |
05 mic | Rs.10300/- |
Details
F1 : 1mg-200g | Rs. 11400/- |
F1 : 1mg-500g | Rs. 15300/- |
F1 : 1mg - 1kg | Rs. 19750/- |
F1 : 1mg - 2kg | Rs. 27500/- |
F1 : 1mg-500mg | Rs. 5600/- |
F1 : 20g-1g anyone | Rs. 2250/- |
F1 : 20kg | Rs. 29500/- |
F1 : 10kg | Rs, 15800/- |
F1 : 5kg | Rs. 12100/- |
F1 : 2kg | Rs. 6000/- |
F1 : 1kg | Rs. 4250/- |
F1 : 500g | Rs. 3650/- |
F1 : 200g | Rs. 2300/- |
F1 : 100g | Rs. 2250/- |
F1 : 50g | Rs. 2250/- |
Price Details
Dia. 2”x1” ht | Rs.30/- |
Dia. 2”x2” ht | Rs.35/- |
Dia. 2”x3” ht | Rs.50/- |
Dia. 3”x1” ht | Rs.45/- |
Dia. 3”x1.5” ht | Rs.55/- |
Dia. 3”x2” ht | Rs.60/- |
Dia. 3”x4” ht | Rs.115/- |
Dia. 4”x2” ht | Rs.95/- |
Dia. 4”x3” ht | Rs.130/- |
Dia. 4”x4” ht | Rs.160/- |
Gauging Trowel :
Gauging Trowel - BS 12, IS 4031
Weight approximately 210 gms. Best quality with hard wood handle blade length 200mm.
ASTM: C 190, IS: 4031
100 to 150mm long steel blade with straight edges.
Sieve Shaker Electrically Operated Table Top
8" Dia | Rs.23250/- |
8”/12” Dia | Rs.29500/- |
Sieve Shaker Motorized Gyratory
for 20 cms diam Sieves | Rs. 17000/- |
for 20/30 cms diam Sieves | Rs. 18000/- |
for 20/30/45 cms diam Sieves | Rs. 33000/- |
balance electronic digital weight platform type with bright led display
Technical Specifications
Capacity | Platform Size | L.C | Price |
---|---|---|---|
30kg | 345x230mm | 1 gm | Rs. 10500/- |
60kg | 400x400mm | 5gm | Rs. 12000/- |
150kg | 500x500mm | 10gm | Rs. 14000/- |
300kg | 600x550mm | 20gm | Rs. 16000/- |
For Double Digital Display Extra | Rs. 3000/- |
Bunsen Burner/Gas Burner; is a kind of gas burner used as laboratory equipment; it produces a single open gas flame, and is used for heating, sterilization, and combustion. The gas can be natural gas (which is mainly methane) or a liquefied petroleum gas, such as propane, butane, or a mixture.
Technical Specifications
Capacity | Platform Size | L.C | Price |
---|---|---|---|
1.5kg | 345x230mm | 0.1gm | Rs.6000/- |
6kg | 345x230mm | 0.5gm | Rs.6000/- |
10kg | 345x230mm | 1 gm | Rs.6000/- |
15kg | 345x230mm | 1 gm | Rs.6000/- |
30kg | 345x230mm | 1 gm | Rs.6000/- |
For preparation of samples for analysis with minimum loss of moisture or volatile constituents. Recommended for grinding of dry plant samples. Weight distribution and balancing or rotating parts has been adjusted to provide greater stability and quieter performance with reduced vibration. Suitable for wider variety of commercial materials. Unit having two stationary steel blades and rotary with steel edge provided in cast iron chamber. Willey mill is fitted on substantial cast iron base. Fitted with suitable motor supplied with S.S. HOPPER with cover, three delivery sieves, having tops of 20, 40 and 80 mesh respectively with plastic receiver, brush, L-N Key. A removable plexi plate permits observation during operation. Suitable to operate on 220Volts, 1ph, 50 cycles A.C. Supply.
Price Details
40 x 25 mm 0.25 HP S.Steel | Rs.25700/- |
65 x 25 mm 0.25 HP S.Steel | Rs.29500/- |
75 x 25 mm 0.50 HP S.Steel | Rs.42500/- |
100 x 50 mm 0.50 HP S.Steel | Rs.53800/- |
200 x 75 mm 1.00 HP S.Steel | Rs.99500/- |
Agriculture Sieves for agriculture materials made out of 20cm diam spun type joint less polished Stainless Steel frame easily fit on each other equipped with round holes.
Aperture Size As Per Requirement With Price
10mm, | Rs.750/- |
6.3mm, | Rs.750/- |
5.0mm, | Rs.750/- |
4.75mm, | Rs.750/- |
4.0mm, | Rs.750/- |
3.35mm, | Rs.750/- |
2.80mm, | Rs.750/- |
2.36mm, | Rs.750/- |
2.0mm, | Rs.750/- |
Carboy made of polypropylene, are much lighter than glass. These autoclavable, dependable & durable carboys are provided with wide handles making it convenient while carrying or pouring purposes.
Price Details
10 Ltrs | 1 Pc | 850/- |
20 Ltrs. | 1 Pc | 1240/- |
50 Ltrs | 1 Pc | 11550/- |
Details
6”x8” | Rs.150/- |
8”x10” | Rs.190/- |
10”x12” | Rs.220/- |
12”x15” | Rs.330/- |
12”x18” | Rs.430/- |
18”x24” | Rs.850/- |
24”x36” | Rs.1650/- |
30”x36” | Rs.2000/- |
coating thickness gauge pencil type ( coattest)
the magnetic base may be of materials like :
based on the rotating disc-splash plate principal. it produces only super fine particles of micron size, which becomes part of the atmosphere, thereby reaching every corner of the room, resulting in uniform humidity. due to the upward thrust imparted to the micron size water droplets, by high speed motorized unit they remain suspended in the atmosphere for longer duration of time. the unit is capable of atomizing up to 3 liters of water in an hour at full evaporation in the driest possible ambient condition. the unit has body made up of s.s. a single unit is effective for an enclosed space of volume up to 40 cu. mtrs. the unit is provided with high speed 2800 rpm motor to run longer period and the blades are aerodynamically balanced to ensure droplets fumigation. to work on 220/230 volts a.c. supply.
optional at extra cost:-
Sampling Plastic bags: Sampling bags are used to collect and contain samples of solids and liquids for laboratory tests. They are sterilized to minimize sample contamination. These translucent bags are made of polyethylene plastic to resist tears and punctures and seal securely to prevent leaks or contamination.
Rate per 10
Tripod Stand: Aluminium for Auto Level - Single Lock - Adjustable Height - Powder Coated Finish for Long Life of The Product - Attractive Color Combination |
We manufacture highly efficient Digital Soil Moisture Meter to detect the percentage of moisture available in soil, coal, cement and sand. Used by diverse industries these apparatus have pen to mark content of moisture in soil and is available in proper case. Manufactured as per the specifications of our clients the equipment are in wide demand across the globe.
All Proving Rings Are Integral Type
cap.above 50 to 500 kgf./ 0.5 to 5KN | Rs.5400/- |
---|---|
cap.above 500 to 3000 kgf/ 5 to 30KN | Rs.6700/- |
cap above.3000 to 5000 kgf./ 50KN | Rs.8600/- |
cap above.5000 to 10000 kgf./ 100KN | Rs.12400/- |
cap above.10000 to 20000 kgf./ 200KN | Rs.15400/- |
cap above 20000 to 30000 kgf./ 300KN | Rs.18600/- |
cap above.30000 to 50000 kgf./ 500KN | Rs.19900/- |
cap above 50000 to 100000 kgf./ 1000KN | Rs.27400/- |
cap above 100000 to 200000 kgf./ 2000KN | Rs.32400/- |
cap above 200000 to 300000 kgf / 3000KN | Rs.54600/- |
Diamond for taking out cores from soil, rock , concrete or any mineral ores etc.
Price Details
30mm Outer dia | Rs.1200/- |
---|---|
38mm Outer dia | Rs. 1600/- |
2” Outer dia | Rs. 2200/- |
60 outer dia | Rs, 2800/- |
3” Outer dia | Rs. 3300/- |
90mm Outer dia | Rs. 4000/- |
4” Outer dia | Rs. 4300/- |
6” Outer dia | Rs.7500/- |
8” Outer dia | Rs.8800/- |
10” Outer dia | Rs. 12000/- |
Lead Shots This Lead shot is small ball of Lead, traditionally made using a shot tower. It is used for a variety of purposes. One use of shot is in shotguns. These also may find their application in model rocketry and hydrometers Lead shots have various applications. These are also used in certain machines in the laboratory to get the results in construction industry.
Ingredients of lead shots by weight:
Price Details:
Bostwick Consistometer is the preferred choice for measuring consistency and flow rate in a variety of products. You can use the "Bostwick" on any viscous material such as sauces, salad dressings, paints, chemicals or cosmetics. The normal way to use the Consistometer is to measure the distance a sample flows in a given time interval.
Product Description:
HAND REFRACTOMETER These Refractometer equipped with short wave filter which differentiate demarcation line for accurate reading, Instrument workable on day light.
Standard Sand Indian Grade 1; 2 or 3 Bag of 25 Kg
Standard sand is used to assess the quality of cement, lime, pozzolana and other mineral admixture used in construction industry
Characteristics
Particle Size Distribution of Standard Sand
Note :
To check material conformity or to download NABL Accredited laboratory test report; scan the QR CODE on each bag. You will get individual report for each bag.
L Box - Method used to determine flow rates and passability of Self-consolidating concrete in confined spaces, as well as an evaluation of filling, passing ability and segregation resistance. Applicable to concrete with aggregates of 1" (25mm) maximum size. Test box is comprised of concrete reservoir, a slide gate, an obstacle grid comprised of 3 bars and a test basin. Includes metal strike-off bar and instructions.
Lead Bricks are basically the rectangular bricks with inter-locking capability. These are mainly used for the purpose of making shielding Walls in case of large area or process, where chances of radiation are very much. Lead Bricks are a convenient solution to temporary or permanent shielding/storage situations. Easy to stack, un-stack and relocate, Lead Bricks provide maximum protection wherever needed. Produced from the highest quality Lead, each brick is standard hardness with a flat, smooth surface, allowing a perfectly flush fit, even at sharp right angles. Bricks of all sizes are available as per the specifications.
Sand Bath is a common piece of laboratory equipment made from a container filled with heated sand. It is used to provide even heating for another container, most often during a chemical reaction. The sand or shot then conducts the heat from the plate to all sides of the reaction vessel. Tray made of GI Sheet Size 10x12. It is placed on a hot plate.
Soil Thermometer These are used for reading temperature of earth at depths from surface down to 1m. Soil thermometers have the benefit that measurements can be taken without disturbing the thermometer.
Bitumen Centrifuge - Extractor RUPSON
Conforming to specifications ASTM D 2172. This instrument is used for determination and checking of bitumen percentage in bituminous mix, the mix is added with solvent and dissolved bitumen is removed by centrifugal action. Consists of a removable aluminum rotor bowl, capacity 1500 gms. This shaft and thus the bowl are rotated fast manually by enclosed gears in the cast body and handle. Solvent is introduced during the test through the holes in the cap of the housing. A drain is provided to collect dissolved bitumen coming out of the rotating bowl and getting collected in the housing.
Bitumen Centrifuge – Extractor (MOTORISED)
Same as above but shaft is rotated by an electric motor and gear. Care is taken to prevent solvent entering into the rotor of electrical motor. Operates on 230 Volts A.C. single phase
Density/Wire Basket -For density tests on aggregates as per procedure lay down.
Specifications: Made of brass with stainless steel wire mesh 6.3mm size ruggedly constructed, approximately 20cm dia x 20cm high. Complete with handle
As above but 18 dia x 18 height: Rs. 6500/-
Rebound Hammer/Concrete test hammer Mechanical type N. Aluminium body. Supplied with hard plastic carrying case. Conforming to EN 12504-2 and ASTM C805 model C0181/N made in Italy.
The concrete test hammer is an instrument which is easy to use, for quick and approximate measurement of the resistance to pressure of manufactured concrete products. The principles on which it works are based on the rebound impact of a hammer on a piston which rests against the surface of the concrete products. The Greater the resistance of the concrete, greater is the rebounded impact. By reading this rebound impact on a scale and relating it to curves on graphs supplied with the instrument, the resistance to compression in M Pa or PSI can be found, with 20% of actual.
Specifications:
Consists of a barrel in which is housed a hammer mass attached to an impact spring which slides on a guide bar. A plunger is attached to the guide bar which is pressed against the surface to be tested. As the piston is pressed against the surface to be tested, on reaching the compressive strength, the hammer mass is released and rebounds to a certain extent (according to the strength of the surface) which is indicated by a rider on a calibrated scale. A lock button fixed on the body of the hammer locks the rider in place and the rider can be recurred to zero position by using the same button. The equivalent compressive strength can be computed from the chart supplied. Each hammer is calibrated against at standard test hammer, and is suitable for specimen of compressive strengths 100 - 700 kg/cm. The instrument, complete with a grinding stone for polishing the test surface, is supplied in carrying case.
Rebound Hammer/Concrete test hammer Mechanical Aluminium body Supplied in wooden box or in plastic carring case Indian make No Warranty: Rs. 8000
Rebound Hammer/Concrete test hammer Mechanical Aluminium body Supplied in in plastic carring case SUPERIOR LABLINE Brand: Rs. 15000
Rs. 15000