RT vision Technologies

Sector 83, Noida, Uttar Pradesh

The Universal TypeTail lamp is IP68 and is capable of operating both on rated voltage110V DC of SLR and 24V DC of Power Car.(Only one input at a time).

• The Operating Voltages are 70V-140V DC for SLR And 18V32V DC for Power Car.

• The Illumination at 1meter is>75 LUX.

• The LED is of red color of wavelength 630-635nm and lies in Class C of BS 1376.

• The Number of LEDs are 36 of Red color and Radiating area is approximately 3000sq mm.

• The Viewing angle is 15- 30

• It has Inbuilt reverse polarity protection.

• It has a 3 way toggle switch for flashing, static and Power supply OFF mode.

IP67 Battery operated LED based Torch Light cum flashing Hand Signal Tricolor Lamp as per RDSO/SPN/195/2008 Rev 2.1 and complying to RDSO/ SPN/144/2006 Rev. 2.0

IP65 Battery operated LED based flashing tail lamp as per RDSO/SPN/200/2010 Rev 2.0.

IP65 compliant LED Based Signal Lamps as subsidiary signals as per RDSO specification no. RDSO/SPN/153/2011 Rev 4.1

ROUTE INDICATOR

• No. of LEDs used 16
• LUX range 45 to 70 at 1.5 m in axial direction
• Dispersion angle 8 to 12 at 50 percent power points
• LEDs of colour co- ordinates Class C of BS: 1376

SHUNT SIGNAL

• No. of LEDs used 13
• LUX range 27 to 42 at 1.5 m in axial direction
• Dispersion angle13 to 17 at 50 percent power points
• LEDs of colour co- ordinates Class C of BS: 1376

CALLING ON

• No. of LEDs used 30
• LUX range 45 to 70 at 1.5 m in axial direction
• Dispersion angle 4 to 10 at 50 percent power points
• LEDs of colour co- ordinates Class B of BS: 1376

IP65 compliant all type LED Based Signal Lamps as per RDSO specification no. RDSO/SPN/153/2011 Rev 4.1 complying to RDSO/ SPN/144/2006 Rev. 2.0, EN 50126 and EN 50129 suitable for Electrical signaling and Interlocking Equipment as per IRS:23 , Relay interlocking IRS:S36 and Computer based Interlocking as per RDSO/SPN/192/2005 using lamp proving relay interface. BS: 1376 1974 is the color reference