We are offering minifloat level switch. When the magnetic field of permanent magnet inside the float is moved into to the proximity of the reed switch inside the stationary stem, the reed switch "snaps" the contact together and closes the electrical circuit. When the magnetic field is moved away from the reed switch, the reed switch does not touch. The circuit is open.

The RP series operating principle is simple. A unit is usually located through a bin wall at the top, middle or low level of a bin. During normal operation (no material present) a synchronous motor rotates the paddle at 1 RPM. When this paddle rotation is impeded by material, surroanding the paddle, motor will stall and cause the Micro switch to change state. (indicating an alarm or control)

Flowline introduces EchoPod, an innovative level sensor that replaces floats, conductance and pressure sensors that fail due to dirty, sticking and scaling media in small tanks 49.2 (1.25 m) or less. EchoPod, a general purpose sensor, combines noncontact switch, controller and transmitter capabilities in one package. Combining 4 relays, 4-20 mA output and pump/valve control in one small sensor allows EchoPod to be your total solution. Maintenance free, EchoPod reduces tank system hardware through simplicity and consolidation. Additionally, EchoPod is well suited for corrosive and dirty applications with its non-metallic housing and transducer. EchoPod provides a total solution for fluid handling and automation. The time to Think Small and Win Big is now, and its with EchoPod.

The general purpose, ultrasonic sensor provides non-contact level detection up to 98.4 (2.5m) with 4 SPST 60 VA 1A relays and a two-wire 4-20 mA level measurement output. Each relay can be configured on a single set point alarm or latched on two sets for automatic fill or empty in simplex or duplex control modes with fail-safe logic. The embedded controller can replace external control hardware. The sensor is well suited for a wide range of corrosive, sticky or dirty type media. EchoPod is broadly selected for day tanks, sumps, IBC totes, lift stations and mini-bulk storage applications. To configure EchoPod, download our free WebCal software and purchase one USB interface
tool.

Flowline introduces the DS14 EchoPod, an innovative level sensor that replaces floats, conductance and pressure sensors that fail due to dirty, sticking and scaling media in small tanks 49.2 (1.25 m) or less. EchoPod, a general purpose sensor, provides non-contact switch and control capabilities in one package. Maintenance free, EchoPod reduces tank system hardware through simplicity and consolidation. Additionally, EchoPod is well suited for corrosive and dirty applications with its non-metallic housing and transducer. EchoPod provides a total solution for fluid handling and automation. The time to Think Small and Win Big is now, and its with EchoPod.

CSA and Cenelec approved intrinsically safe use in general purpose or hazardous applications, the ultrasonic level switch is broadly applied in chemical, waste, hydrocarbon and petroleum based liquids. Media examples include sulfuric acid, diesel fuel and wastewater. The sensor is universally mounted through the wall or inside the tank, and is com patible with the MicroPoint indicator.

The general purpose buoyancy level switch is a perfect choice for relatively clean water and chemical solutions with non-coating and/or scaling characteristics. Media examples include acetic acid and process water. The baffle body eliminates switch chatter caused by turbulence. The dry contact closure provides a reliable switch interface with remote devices such as a PLC, SCADA or alarm. The sensor mounts vertically inside the tank on our Smart-Trak or Switch-Pak fittings.

The Float Level Switch are made of molded, chemical resistant polypropylene, that it was serviceable, low-cost, and specially designed to solve the long distance, multipoints level detection, liquid with pump or granule instances. Certainly, it's suitable for common liquid also. FAC, FAP, FAR Type float switch make use of micro switch as contact component.

We are offering minifloat level switch. When the magnetic field of permanent magnet inside the float is moved into to the proximity of the reed switch inside the stationary stem, the reed switch "snaps" the contact together and closes the electrical circuit. When the magnetic field is moved away from the reed switch, the reed switch does not touch. The circuit is open.

The RP series operating principle is simple. A unit is usually located through a bin wall at the top, middle or low level of a bin. During normal operation (no material present) a synchronous motor rotates the paddle at 1 RPM. When this paddle rotation is impeded by material, surroanding the paddle, motor will stall and cause the Micro switch to change state. (indicating an alarm or control)

Flowline introduces EchoPod, an innovative level sensor that replaces floats, conductance and pressure sensors that fail due to dirty, sticking and scaling media in small tanks 49.2 (1.25 m) or less. EchoPod, a general purpose sensor, combines noncontact switch, controller and transmitter capabilities in one package. Combining 4 relays, 4-20 mA output and pump/valve control in one small sensor allows EchoPod to be your total solution. Maintenance free, EchoPod reduces tank system hardware through simplicity and consolidation. Additionally, EchoPod is well suited for corrosive and dirty applications with its non-metallic housing and transducer. EchoPod provides a total solution for fluid handling and automation. The time to Think Small and Win Big is now, and its with EchoPod.

The general purpose, ultrasonic sensor provides non-contact level detection up to 98.4 (2.5m) with 4 SPST 60 VA 1A relays and a two-wire 4-20 mA level measurement output. Each relay can be configured on a single set point alarm or latched on two sets for automatic fill or empty in simplex or duplex control modes with fail-safe logic. The embedded controller can replace external control hardware. The sensor is well suited for a wide range of corrosive, sticky or dirty type media. EchoPod is broadly selected for day tanks, sumps, IBC totes, lift stations and mini-bulk storage applications. To configure EchoPod, download our free WebCal software and purchase one USB interface
tool.

Flowline introduces the DS14 EchoPod, an innovative level sensor that replaces floats, conductance and pressure sensors that fail due to dirty, sticking and scaling media in small tanks 49.2 (1.25 m) or less. EchoPod, a general purpose sensor, provides non-contact switch and control capabilities in one package. Maintenance free, EchoPod reduces tank system hardware through simplicity and consolidation. Additionally, EchoPod is well suited for corrosive and dirty applications with its non-metallic housing and transducer. EchoPod provides a total solution for fluid handling and automation. The time to Think Small and Win Big is now, and its with EchoPod.

CSA and Cenelec approved intrinsically safe use in general purpose or hazardous applications, the ultrasonic level switch is broadly applied in chemical, waste, hydrocarbon and petroleum based liquids. Media examples include sulfuric acid, diesel fuel and wastewater. The sensor is universally mounted through the wall or inside the tank, and is com patible with the MicroPoint indicator.

The general purpose buoyancy level switch is a perfect choice for relatively clean water and chemical solutions with non-coating and/or scaling characteristics. Media examples include acetic acid and process water. The baffle body eliminates switch chatter caused by turbulence. The dry contact closure provides a reliable switch interface with remote devices such as a PLC, SCADA or alarm. The sensor mounts vertically inside the tank on our Smart-Trak or Switch-Pak fittings.

The Float Level Switch are made of molded, chemical resistant polypropylene, that it was serviceable, low-cost, and specially designed to solve the long distance, multipoints level detection, liquid with pump or granule instances. Certainly, it's suitable for common liquid also. FAC, FAP, FAR Type float switch make use of micro switch as contact component.