RR Kabel Limited

Shivaji Nagar, Pune, Maharashtra

These power and control flat cables can be used on festooned systems on handling equipment as overhead cranes. They are designed for indoors and outdoors for ambient temperature down to -25C.These cables can accept a trolley traveling speed up to 120m min.

These cables are used in high rise buildings, commercial complexes, schools and educational institutions, hospitals, etc. for the connection with security systems like smoke detectors, emergency lightings, exit signboards and fire command center. These cables are used where the fire safety is utmost important.

The cables are suitable for conduit wiring , especially in installations where fire, smoke and toxic fumes create potential threat.Harmonized Code : 1.5 mm2 to 630 mm2 stranded class 2 H07Z-R, Conductor : Plain annealed copper conductor 1.5 mm2 to 630 mm2 stranded Cl. 2 complying with EN 60228.

1.1 kV, 2 cores AL / CU conductor, PVC insulated, unarmoured cables as per IS 1554 Part 1.Conductor : AL up to 10 Sq. mm conductor are solid Cl. 1 as per IS 8130. And above 10 Sq. mm conductor are stranded round or compact, round or Compact shape conductor Cl. 2 as per IS 8130, In CU 4 & 6 Sq. mm conductor are solid Cl. 1 or stranded round Cl. 2 as per IS 8130. 10 Sq. mm conductor is stranded round or stranded, compact conductor Cl. 2 as per IS 8130, Above 10 Sq. mm conductor are stranded round or compact round or compacted shaped Cl. 2 as per IS 8130, Insulation : PVC Type A, as per IS 5831.(Option : HR PVC Type C, as per IS 5831).

These cables are used in UPS systems and server rooms as the nylon and fiber glass braid on the cable does not allows the heat generated in the conductor, due to continuous operation, to be felt in the surrounding areas. These cables are widely used in aircraft cabling.

The PVC insulated and sheathed 3 core flat cables are mainly used in pump connections. They are also used in many industrial applications.The sheath is specially made out to resist tough and difficult condition of usage, excellent resistant to water, conditionally resistant towater and grease.

Solar cables are intented for use in photovoltaic power supply systems and similar applications as free hanging, movable, fixed installation and buried in ground in constructional covered systems. The cables can be used indoor, outdoor, in hazard explosion areas, in industry and agriculture. They are suitable for applications in equipment with protective insulation (protecting Class 2).

Conductor : Annealed copper wires according to BS EN 60228, Insulation : Polyvinyl chloride PVC, Pairs : Twisted, Identification Pairs : Black & white, continuously numbered on white core (1, 2, 3) for multi-element, Wrapping : 1 layer of PETP tape, Collective Screen : Aluminium PETP tape over tinned copper drain wire, Cable Sheath : Polyvinyl Chloride PVC, Colour : Black. Blue for intrinsically safe system.