Roxtec plastic-coated metal straps are mechanically strong and resistant to fire. They fulfill the technical requirements regarding regular metallic fixation of cables to the cable racks.
Roxtec plastic-coated metal straps are mechanically strong and resistant to fire. They fulfill the technical requirements regarding regular metallic fixation of cables to the cable racks.
The Roxtec preholed entry plates enable a range of Roxtec frames and entry seals to be installed in existing standard openings of cabinets and shelters.
The Roxtec SE PPS is an accessory for fire-proof installation of several plastic pipes in Roxtec SSF type frames. Frames and accessories are ordered separately.
Roxtec tightening tool for fixing cable straps to cable racks. Type 140, with cutting function, fits all Roxtec straps while type 142, without cutting function, is for 8 mm straps.
Roxtec tools, such as pre-compression tools, clips, clamps, pullers and indicators, simplify quick and safe onsite installations and re-installations of Roxtec seals, frames, sealing modules and wedges.
The Roxtec C ComShelt kit is a light-weight cable and pipe sealing solution with a composite frame, integrated compression and adaptable sealing modules. It is designed for use in telecom shelters and cabinets.
The Roxtec ComSeal is a light-weight and area efficient cable sealing solution for cabinets. The product is supplied as ready-made kits which include all necessary components.
The Roxtec ComSeal LW is a light-weight and area efficient cable and pipe sealing solution for cabinets. The frame is made out of cast aluminum. The product is supplied as ready-made kits which include all necessary components.
The Roxtec ComShelt is a sealing solution for cables and pipes of different sizes. The light-weight composite frame with integrated compression unit is designed for use in telecom shelters and cabinets. The product is supplied as ready-made kits which include all necessary components.
The Roxtec EzEntry simplifies cable sealing in cabinets and enclosures. The single-side seal consists of a composite frame with integrated compression unit and adaptable modules. The product is supplied as ready-made kits which include all necessary components.
The Roxtec HD 32 is a cable entry device for harsh and hazardous environments that allows up to 32 cables per opening. The cable transit has a 316L stainless steel frame and sealing modules which are adaptable to a variety of cable sizes. The entry seal can be used with armored cable requiring bonding and grounding.
The Roxtec C RS T entry seal is a small-sized solution for cabinets and equipment. The product is supplied as ready-made kits which include all necessary components.
The Roxtec CRL is a round sealing solution for 4" and 5" holes. The square packing space in the frame houses sealing modules and cables, pipes and fiber optics. Compression is integrated in the frame.
The Roxtec UG kit consists of a round openable frame and easily adaptable sealing modules for underground use. The product allows for a mix of cables and pipes from 4 to 52mm in the same opening.
The Roxtec RG M63 entry seal is a cable gland type of seal with adaptable sealing modules at the center. The product is supplied as ready-made kits which include all necessary components. Recommended knock-out punch is Greenlee hole punch (size 2.52ISO 63).
The Roxtec RS Ex is a round entry seal including a sleeve. The seal consists of two halves and an adaptable center with removable layers. Compression is integrated in the seal.
The Roxtec CF 16 Ex frame has a very low profile and is suitable for enclosures where many cables need to be routed in areas with limited space. The CF 16 Ex has integrated compression and can accommodate up to 30 cables. The frames are approved for use in potentially explosive atmospheres and hazardous locations.
The Roxtec B frame is a metal frame with a small flange made for casting into the structure. It is assembled into different sizes and combinations. It can also be installed around existing cables and pipes.
The Roxtec CF 832 BG frames of cast aluminum with nickel plating ensure electrical conductivity. A frame can handle multiple pre-terminated cablespipes in one opening.
The Roxtec CF 8 Ex and CF 32 Ex are cast aluminum frames suitable for compact installations in cabinets. The compression unit is integrated in the frame. The CF 8 Ex solution can accommodate up to 15 cables and the CF 32 Ex up to 60 cables. The frames are approved for use in potentially explosive atmospheres and hazardous locations.
The Roxtec ComPlus is a light-weight composite frame with flange and knock-out covers. Frame parts can be combined to make different numbers of openings in width.
The Roxtec G Ex metal frame with flange is attached with its gasket to the structure by means of screws through pre-drilled holes in both the frame and the gasket. The G Ex frame is approved for use in potentially explosive atmospheres and hazardous locations.
The Roxtec GH BG FL 100 frame allows for high packing density. The rectangular steel frame can be used with a GE extension frame in galvanized steel to cover the depth of a thick wallfloor. The frames have integrated ground lugs to simplify connection to earthed structure. It comes with bolt holes and a wider flange for easier bolting onto uneven structures like concrete or bricks.
The Roxtec GH BG frame allows for high packing density. The rectangular steel frames have integrated ground lugs to simplify connection to earthed structure. It comes with bolt holes and a smaller flange for bolting to even structures.
The Roxtec S Ex frame is a metal frame for welding into precise apertures. It is available in different materials and with a single opening or in combinations with several openings in width andor height. The Roxtec S Ex frame is approved for use in potentially explosive atmospheres and hazardous locations.
The Roxtec GKO is a bolted together metal frame with flange. The frame parts are assembled to create different sizes and combinations of openings. The frame extends from the structure so that it can be bolted over multiple or irregular apertures. It is suitable for installation around existing cables and pipes.
The Roxtec GHM frame is designed for installation where welding is not suitable. The frame is drilled for bolting according to standardized hole patterns and sealed to the structure with a TSL sealing strip.
The Roxtec S frame is a metal frame for welding into precise apertures. It is available in different materials and with a single opening, or in combinations with several openings in width andor height.
The Roxtec SF frame is a metal frame with flange for wider aperture tolerance. It is available in different materials and with a single opening, or in combinations with several openings in width andor height.
The Roxtec SF.W Ex frame is a metal frame with flange. It is available with a single opening, or in combinations with several openings in width andor height. The Roxtec SF.W Ex frame is approved for use in potentially explosive atmospheres and hazardous locations.
The Roxtec SK frame is an S frame with extended depth for welding into precise apertures. It enables angled installations andor increased distance between the packing space and the steel section. It is available in different materials.
The Roxtec SRC frame is a metal frame for load bearing structures. It is designed with rounded corners to reduce stress concentration and the risk of cracks around the frame. It is available in different materials.
The Roxtec End User Inlet is a plug for existing and new fiber or hybrid cables. The seal is to be installed in a drilled hole in a brick or concrete wallfloor. The flange can be removed for installation in angled holes. Re-installation of the seal is possible.
The Roxtec H UG is a three-part seal for easy installation. The transit has a +5mm tolerance towards the aperture and an indicator showing when a compressed seal is achieved.