Roto Dynamic

Ram Nagar, Coimbatore, Tamil Nadu

Thermic fluid pumps Our Backpullout Design of Pumps makes it Easy for Inspection and Repairs of Rotation Parts. Thermic Fluid Pumps are supplied from 1HP to 20 HP against customer requirements.Available standard and reinforced bearing assemblies for high temperature or high suction pressure Bearing housing can be provided with a constant level oiler.

Boiler feed pumps is always running below the critical speed, is guided in this type in antifriction bearings at both ends. The standard pump suction pipe is directed to the left to right, the discharge pipe extends radially upward. The antifriction bearings are grease lubricated. The stuffing box on the suction side can be provided with a pressure water seal for perfect sealing, if required.

Mud pump Marked with arrow on the casing of each pump. Check before coupling with the prime mover.Companion flanges are supplied along with the pump.

Water ring vacuum pump are best suited for Pharmaceutical, Food, Confectionery, Petro-chemicals, Textiles and Plastic Industries, Paper and Sugar Mills, Cement, Metallurgical Laboratories and Furnaces, Refrigeration Plants, Distillaries, Pneumatic Conveying, Cigarrette, Tiles and Ceramics Industries etc. Generally, the main casing & almost all the components are fabricated from C.I. Except the main shaft, which is of MSEN-8. However, it is also offered in various combinations of resistant materials for specific applications. Details are supplied on demand.

Bearing HousingAvailable standard and reinforced bearing assemblies for high temperature or high suction pressure Bearing housing can be provided with a constant level oiler. Shaft SleeveEasily replaceable, compatible and hardened. ROTOMECH offers Back Pullout Process pump for Petrochemical and chemical Industries for storable free, study and durable sophisticated.

NON CLOG PUMP are horizontal type end suction centrifugal pumps for handling heavily contaminated or muddy liquids with solids in suspension such as mash, pulps, beet shreads, sewage etc. The impeller has an axial intet. With a diameter equal to the internal width of the suction branch of the pump. The impeller hub is situated on the stuffing box end to ensure solids to be handled without difficulty. The impeller is of a double dusted, vaneless design and runs in an axially symmetrical pump casing . The size of the particles that can be handled depends on the cross sectional area of the impeller ducts

Pumping to Filter Press, Tiles & Marbles, High Pressure Pumping to Filter For sludge's , Mud Pumping for General Dc-Watering of excavations, Effluents, Sludge, Suitable for Muddy Water, Slurry Transfer all type of Industrial Application, Extensively used in Textiles Dyeing, and Various industries.Continous Duty Pump, No mechanical Seal, Trouble Free & Easy Maintenance.

Cast Iron, Cast Steel, Bronze, SS - 304, SS - 316, CD - 4MCU, Alloy - 20, Etc.