The KSAT is an instrument that measures the saturated hydraulic conductivity (Ksat) of soil samples. Hydraulic conductivity—the rate at which water flows through soil—is a key component in most models that simulate water flow, solute transport, and runoff. The KSAT measures saturated hydraulic conductivity.

Features:

• Automation-no timing outflow, weighing beakers, or making judgment calls.

• Better data—dramatically improves accuracy by reducing human error.

• Both Constant and Falling Head methods.

• Easy-to-use software—performs all calculations and makes temperature corrections based on the viscosity of water.

• Wide Range—measure conductivities from 10, 000 - 0.1 cm/d.

• Based on the inversion of Darcy’s Law.

• Complies with DIN 19683-9 and DIN 18130-1.

The WP4C can be used to measure the water potential of any porous material.  It's typically used to analyze soil, soilless substrates, plant material, and seeds, but it has been used to measure a variety of unusual things, including apples, bricks, oil, and insect carapaces. It is a benchtop instrument.  To measure water potential, you place the sample in a round sample cup (4cm in diameter and 1cm tall) and set the cup in the lexan sample drawer.  You slide in the drawer and turn the knob to seal the chamber.  After about 5 minutes, the WP4C will beep and show your final water potential reading.

The instrument can be calibrated using saturated salt solutions (mix your own or order single-sample vials of standards on the accessories tab).  New algorithms let you fine-tune calibration for excellent accuracy (±0.05 MPa or better). The HYPROP FIT Software can be used to plug in water potentail data collected by the WP4C for fitting different water retention models (i.e. van Genuchten, van Genuchten Bimodal, Brooks & Corey).

If chemical contamination or saltwater intrusion is a concern in your water, we also offer the conductivity plus. This premium water level meter will indicate not only the temperature and water level, but also the conductivity of the water on the built in high contrast digital LCD display. Since the calibration of this conductivity probe is a simple 1 point calibration using a 1413μS standard, it is an excellent tool for use in both groundwater wells and surface water.

The TDR 350 accurately measures soil moisture across the full range of soil conditions. Improved ergonomic design provides quick and easy measurements. Validate your cultural practices with hands free data collection integrated with Bluetooth and GPS.

• Increased accuracy of soil moisture (Volumetric Water Content)

• Measures EC (Electrical Conductivity)

• Measures Turf Surface Temperature

• Integrated Bluetooth and GPS

• Data logger records approximately 50, 000 measurements

• Industry exclusive backlit display

• Improved shaft-mounted probe with telescoping tubular frame

• Data collected with USB flash drive

• No PC interface needed

• Powered by AA lithium batteries

• Compatible with SpecConnect and FieldScout App

• Optional IR Temp sensor to measure turf canopy

The Suspended Solids Meter, we offer, is an imported insite ig usa make. The suspended solids meter is capable for research grade measurement. To record the variation in soil moisture at user’s selectable time interval with date and time stamp, the suspended solids meter is available with data logger capable. The suspended solids meter is used for monitoring silt content in flowing water. The suspended solids meter is a unique system, which combines advanced electronics with a solid-state optical sensor. The suspended solids meter is a multi-range indicator, designed for the measurement of suspended solids in aqueous solutions. sizes available : 0-30, 0000 mg/l and 0-1500 mg/l

The Automatic Water Level Recorder has a data logger capable to record the variation in water level at user’s selectable time interval with date and time stamp. The imported Heron Canada make automatic water level recorder ideal for research grade quality measurement at remote locations. The automatic water level recorder is effective for recording of long term water level fluctuations. This non-vented pressure transducer based instrument with logger and battery in a sealed small SS capsule can be easily installed inside a 2” diameter pvc or ms pipe/still well. Automatic water level recorder is also suitable for stream gauging. Details: Enclosure: SS Ranges available : 0- 10/30/60/120 meters technical specifications the automatic water level recorder combines a data logger, temperature sensor, pressure transducer, and a 10-year battery in a small, maintenance free, and waterproof stainless steel housing. The DipperLog features a non-volatile memory with a capacity of 64, 000 sets of temperature and water level data points. Readings are linear at a user-defined interval. Accuracy is 0.05% fs, with a lifetime factory calibration.

The oil, water interface meter is used to measure the interface level between two liquids in the same tank, vessel, well or aquifer. The dissimilar density of two liquids means the lower density, non-conductive product (LNAPL) will float on top of the higher density, conductive liquid (water). Denser products will tend to sink (DNAPL), creating a layer under the water. The premium padded carry case comes included to protect your precision instrument from the elements. The hydrocarbon resistant Kynar jacketed, high tensile steel core tape is able to withstand hydrocarbons, solvents and other harsh contaminants. The CSA intrinsically safe certification makes it ideal for use in hazardous environments by Oil & Gas, Chemical and Petrochemical Industries.

Double Ring Infiltrometer rings made from 14 gauge MS sheet rolled and butt-welded. Hammering end reinforced with ½” iron strip and other end sharpened for smooth entry in to soil.  Complete with one inner ring 30-cm dia.; one outer ring 45-cm dia. (Height of rings 30-cm); Driving Plate with Hammer; Float, Guide rod, Pointer Gauge & Stop watch.

We are a renowned firm indulged in exporting and supplying Mini Disk Infiltrometer used in various industries to test unsaturated hydraulic conductivity and infiltration rates. We offer hi-tech Mini Disk Infiltrometer that is compact and easy to use. Ideal for irrigation system design, classroom instruction and many other applications, Mini Disk Infiltrometer is economical too. We can process bulk orders for feature-packed Mini Disk Infiltrometer.

More information on Mini Disk Infiltrometer :

• The Mini Disk Infiltrometer is a quick way to test unsaturated hydraulic conductivity and infiltration rates.
• It's ideal for irrigation system design, classroom instruction, erosion hazard evaluation, burn severity studies, and many other applications. Small, compact, and simple, the Mini Disk Infiltrometer is a true field instrument. 
• It can be tossed into a backpack with a bottle of water.
• Adjustable suction and a porous stainless steel contact plate assure a reliable soil unsaturated hydraulic conductivity measurement.

We offer imported irrometer usa make Digital Soil Moisture Meter. The digital soil moisture meter has a data logger to record the variation in soil moisture at user’s selectable time interval with date and time stamp. The digital soil moisture meter is used for soil moisture measurement for irrigation scheduling. The digital soil moisture meter is inexpensive, easy to use, and maintenance free. details range : 0-200 centibarssizes available : 1.5 meter, 3 meter, etc. highlights fully solid statedoes not dissolves in soilno affect of freezing temperaturesinternal compensation for commonly found salinity levels how to use digital soil moisture meter? place a watermark sensor in the root zone of your crop or turf and use the handheld digital meter to get an instant reading of moisture tension from 0 (saturated) to 200 (dry) centibar.

The KSAT is an instrument that measures the saturated hydraulic conductivity (Ksat) of soil samples. Hydraulic conductivity—the rate at which water flows through soil—is a key component in most models that simulate water flow, solute transport, and runoff. The KSAT measures saturated hydraulic conductivity.

Features:

• Automation-no timing outflow, weighing beakers, or making judgment calls.

• Better data—dramatically improves accuracy by reducing human error.

• Both Constant and Falling Head methods.

• Easy-to-use software—performs all calculations and makes temperature corrections based on the viscosity of water.

• Wide Range—measure conductivities from 10, 000 - 0.1 cm/d.

• Based on the inversion of Darcy’s Law.

• Complies with DIN 19683-9 and DIN 18130-1.

The WP4C can be used to measure the water potential of any porous material.  It's typically used to analyze soil, soilless substrates, plant material, and seeds, but it has been used to measure a variety of unusual things, including apples, bricks, oil, and insect carapaces. It is a benchtop instrument.  To measure water potential, you place the sample in a round sample cup (4cm in diameter and 1cm tall) and set the cup in the lexan sample drawer.  You slide in the drawer and turn the knob to seal the chamber.  After about 5 minutes, the WP4C will beep and show your final water potential reading.

The instrument can be calibrated using saturated salt solutions (mix your own or order single-sample vials of standards on the accessories tab).  New algorithms let you fine-tune calibration for excellent accuracy (±0.05 MPa or better). The HYPROP FIT Software can be used to plug in water potentail data collected by the WP4C for fitting different water retention models (i.e. van Genuchten, van Genuchten Bimodal, Brooks & Corey).

If chemical contamination or saltwater intrusion is a concern in your water, we also offer the conductivity plus. This premium water level meter will indicate not only the temperature and water level, but also the conductivity of the water on the built in high contrast digital LCD display. Since the calibration of this conductivity probe is a simple 1 point calibration using a 1413μS standard, it is an excellent tool for use in both groundwater wells and surface water.

The TDR 350 accurately measures soil moisture across the full range of soil conditions. Improved ergonomic design provides quick and easy measurements. Validate your cultural practices with hands free data collection integrated with Bluetooth and GPS.

• Increased accuracy of soil moisture (Volumetric Water Content)

• Measures EC (Electrical Conductivity)

• Measures Turf Surface Temperature

• Integrated Bluetooth and GPS

• Data logger records approximately 50, 000 measurements

• Industry exclusive backlit display

• Improved shaft-mounted probe with telescoping tubular frame

• Data collected with USB flash drive

• No PC interface needed

• Powered by AA lithium batteries

• Compatible with SpecConnect and FieldScout App

• Optional IR Temp sensor to measure turf canopy

The Suspended Solids Meter, we offer, is an imported insite ig usa make. The suspended solids meter is capable for research grade measurement. To record the variation in soil moisture at user’s selectable time interval with date and time stamp, the suspended solids meter is available with data logger capable. The suspended solids meter is used for monitoring silt content in flowing water. The suspended solids meter is a unique system, which combines advanced electronics with a solid-state optical sensor. The suspended solids meter is a multi-range indicator, designed for the measurement of suspended solids in aqueous solutions. sizes available : 0-30, 0000 mg/l and 0-1500 mg/l

The Automatic Water Level Recorder has a data logger capable to record the variation in water level at user’s selectable time interval with date and time stamp. The imported Heron Canada make automatic water level recorder ideal for research grade quality measurement at remote locations. The automatic water level recorder is effective for recording of long term water level fluctuations. This non-vented pressure transducer based instrument with logger and battery in a sealed small SS capsule can be easily installed inside a 2” diameter pvc or ms pipe/still well. Automatic water level recorder is also suitable for stream gauging. Details: Enclosure: SS Ranges available : 0- 10/30/60/120 meters technical specifications the automatic water level recorder combines a data logger, temperature sensor, pressure transducer, and a 10-year battery in a small, maintenance free, and waterproof stainless steel housing. The DipperLog features a non-volatile memory with a capacity of 64, 000 sets of temperature and water level data points. Readings are linear at a user-defined interval. Accuracy is 0.05% fs, with a lifetime factory calibration.

The oil, water interface meter is used to measure the interface level between two liquids in the same tank, vessel, well or aquifer. The dissimilar density of two liquids means the lower density, non-conductive product (LNAPL) will float on top of the higher density, conductive liquid (water). Denser products will tend to sink (DNAPL), creating a layer under the water. The premium padded carry case comes included to protect your precision instrument from the elements. The hydrocarbon resistant Kynar jacketed, high tensile steel core tape is able to withstand hydrocarbons, solvents and other harsh contaminants. The CSA intrinsically safe certification makes it ideal for use in hazardous environments by Oil & Gas, Chemical and Petrochemical Industries.

Double Ring Infiltrometer rings made from 14 gauge MS sheet rolled and butt-welded. Hammering end reinforced with ½” iron strip and other end sharpened for smooth entry in to soil.  Complete with one inner ring 30-cm dia.; one outer ring 45-cm dia. (Height of rings 30-cm); Driving Plate with Hammer; Float, Guide rod, Pointer Gauge & Stop watch.

We are a renowned firm indulged in exporting and supplying Mini Disk Infiltrometer used in various industries to test unsaturated hydraulic conductivity and infiltration rates. We offer hi-tech Mini Disk Infiltrometer that is compact and easy to use. Ideal for irrigation system design, classroom instruction and many other applications, Mini Disk Infiltrometer is economical too. We can process bulk orders for feature-packed Mini Disk Infiltrometer.

More information on Mini Disk Infiltrometer :

• The Mini Disk Infiltrometer is a quick way to test unsaturated hydraulic conductivity and infiltration rates.
• It's ideal for irrigation system design, classroom instruction, erosion hazard evaluation, burn severity studies, and many other applications. Small, compact, and simple, the Mini Disk Infiltrometer is a true field instrument. 
• It can be tossed into a backpack with a bottle of water.
• Adjustable suction and a porous stainless steel contact plate assure a reliable soil unsaturated hydraulic conductivity measurement.

We offer imported irrometer usa make Digital Soil Moisture Meter. The digital soil moisture meter has a data logger to record the variation in soil moisture at user’s selectable time interval with date and time stamp. The digital soil moisture meter is used for soil moisture measurement for irrigation scheduling. The digital soil moisture meter is inexpensive, easy to use, and maintenance free. details range : 0-200 centibarssizes available : 1.5 meter, 3 meter, etc. highlights fully solid statedoes not dissolves in soilno affect of freezing temperaturesinternal compensation for commonly found salinity levels how to use digital soil moisture meter? place a watermark sensor in the root zone of your crop or turf and use the handheld digital meter to get an instant reading of moisture tension from 0 (saturated) to 200 (dry) centibar.