Roorkee Industries

Mathura Vihar Colony, Roorkee, Uttarakhand

Quickly determine the extent of subsurface soil compaction with this tester! A color-coded, stainless steel dial indicates if growing conditions are good (green), fair (yellow), or poor (red). The dial is liquid-filled to reduce shock. The tester features a durable molded housing, rubber hand grips, and a 24” stainless steel rod with an adjustable shock collar that guards against damage during transport or storage. Two tips are included (1/2” tip for firm soil and 3/4” tip for soft soil) and store conveniently in the tester housing. Penetration Depth: up to 24” in 3” increments. Testing Range: Good growing conditions, 0 to 200 psi; Fair growing conditions, 200 to 300 psi; Poor growing conditions, 300 psi and above.

Soil Moisture Tensiometer is capable for research grade quality measurement. The imported irrometer usa make product is also available with data logger, capable to record the variation in soil moisture at user’s selected time interval with date and time stamp. The soil moisture tensiometer is used for soil moisture measurement for irrigation scheduling. The instrument does not dissolve in soil and is inexpensive and easy to use. details raw material used : butyraterange : 0-100 centibarssizes available : 15, 30, 45, 60, 90 & 120 cm long how to use? install the soil moisture tensiometer in the root zone of your crop or turf and use the reading of gauge to get an instant reading of moisture tension from 0 (saturated) to 100 (dry) centibar.

Heron Instruments’ vertical down hole inspection cameras are designed and manufactured for well inspectors, well drillers, hydrogeologists and other professionals who require to view the condition of wells, drains, boreholes, vertical shafts and open bodies of water. Keeping portability in mind, the downhole cameras and included accessories comes in a tough, wheeled case for ease of transport to job sites for performing well inspections, new well installations or well maintenance. Where some other water well cameras are costly and cumbersome to service, the modular design of the self-contained Heron downhole cameras allows for easy replacement of parts for service and future up-grades.

The Evaporation Pan is used to determine the evaporation rate of open water. The Pan is manufactured from GI/Copper sheet, duly tinned and epoxy pointed as per IS: 5973: 1970, and tested for no water leakage. The Stilling well and measuring bucket are manufactured from Brass/copper. This is supported on wooden platform and covered with reinforced chicken-mesh. It is supplied with a thermometer and its clamp.

We are the most trusted name among Suppliers and Exporters of Portable Water Level Indicator, which is designed specifically by topnotch researchers to measure the water levels in deep bore wells. We provide customers with a wide range of Portable Water Level Indicators that are capable of fitting in a 2-centimeter gap. Our teams of experts perform a number of thorough tests on all the Hydrological devices to ensure superior quality indicators reach every customer.

More information on Portable Water Level Indicator (Sounder) :

• The water level Indicator (Sounder) is designed for water level measurements in wells and deep bore wells. It has a steel probe connected with the flat permanently marked polyethylene tape, having markings.
• The probe can easily be inserted in a gap of 2 centimeters. The wire is winded on a well balanced reel/spool, made of PVC having a handle to fasten the wire.
• The probe is lowered into the stream or well or bore well, as the tip of the probe touches the surface of the water; an in-built electronic circuit indicates contact with water by sounding a beep. Depth is read from the attached cable having graduations at every m/cm/mm.

PARIO calculates the particle size distribution by Stokes’ law, with the range of particle sizes spanning from 63 μm to 1 μm. It allows for unattended, automated operation, with no interference by lab personnel. Just set it up and come back 6 hours later to a finished measurement with all the data you need. It’s measuring method is based on the well-established hydrometer or pipette method. That means there is no need for soil-specific corrections with transfer functions as required for almost any other automated measurement method, such as laser diffraction or image analysis.

The Automatic Rain Gauges, we offer, are manufactured using hi-grade PVC. The Automatic Rain Gauges with event logger are designed to record detailed rainfall history including quantity, time, date, duration, and intensity. The Automatic Rain Gauge is ideal for long term rainfall recording. Functioning Of Automatic Rain Gauges Tipping Bucket Rain Gauge and collector with 8” diameter meets NWS specifications for statistical accuracy, giving one pulse when 0.2/0.254 mm rainfall is collected. The sophisticated Logger within this Tipping Bucket Rain Gauge records rainfall at a one minute resolution.

Soil thermometer resists breakage and corrosion. Other features include a stainless steel stem, polycarbonate lens and easy-to-read markings. Dial: 2” dia; Length: 20 cm (8”); Temperature Range: -15°C to 50°C; Graduations: 1°C; Accuracy: 1% full scale.

We are one of the trusted Automatic Weather Station Importers and Suppliers in India. The Automatic Weather Station is a weather-proof casing comprising of components such as data logger, rechargeable battery, telemetry, meteorological sensors, etc. We source Automatic Weather Station from reliable manufacturers. The Automatic Weather Station is provided anywhere in India, within the set time frame, in suitable packaging. 2900 ET Automatic Weather Station features a built-in data logger that stores your measurements in a fail-safe, non-volatile memory at user-defined intervals-until you transfer the data to your PC. Select measurement intervals of 1, 10, 15, 30, or 60 minutes. A 30-minute interval will record for 183 days before the station's memory is full. The Weather Station helps you optimize your irrigation and IPM programs. The comprehensive water management system enables you to assign discrete K-factors to each crop/ field you track for evapotranspiration and irrigation amounts. Details

• An LCD screen displays current and high/ low readings.
• Add up to 5 plug-in sensors and customize your station to your measurement needs.
• A12-month battery power source (4AA batteries) means no solar panels to purchase or maintain.
• Preassembled sensor array with mounting hardware makes setup quick and easy.
• Add-on sensors plug directly into the station.
• No complex wiring or calibration is required.
• U.S. or metric units of measure
• Mounts to post, tripod, or 11/4 pole

The 2900 ET Automatic Weather Station Measures, Calculates, And Logs

• Evapotranspiration
• Solar radiation
• Air temperature
• Relative humidity
• Rainfall
• Wind speed and direction
• Wind chill
• Dew point

Optional Sensors

• Barometric Pressure
• Leaf Wetness
• Pressure Transducer
• Soil Moisture
• Soil Temperature
• CO2
• PAR
• Quantum Light Sensor

Software

• Spectrum’s AE award winning software, Spec 8 Pro delivers crucial information to growers and researchers in an easy-to-use interface
• Plotgraphson-the-fly with a simplified interface
• Set sensor alarms to call your phone or pager for frost, rainfall, or other conditions. Import data files from more applications. Customize and save your important reports
• Spec Proisa powerful tool for growers, researchers, or other users that need the best data at the right time

Communication Options

• Suit your specific needs by choosing from direct connection, wireless, cellular or other data transfer options

Data Shuttle

• Transport your weather data to your host PC. Memory holds data from up to 8 full 2000 Series Mini Stations or 5 full Weather Stations

Sun – Shine Recorder is manufactured as per IS: 7243: 1974, and is used for accurate measurement of the duration of Bright Sunshine. Basic main components are Bowls that are precisely manufactured from Bronze as per IS: 306: 1968. The Base is of White Marble. The Sphere Bowl is made from uniformed and well-annealed air bubbles free Glass having good surface finish. This instrument is supplied with recording graphs for one year.

The TDR-315L is a true waveform digitizing Time Domain Reflectometer that derives soil permittivity and water content from the propagation time of an electromagnetic impulse conveyed along its waveguide. Like many of its expensive predecessors (conventional TDR mainframes) it contains an ultra-fast rise time step function generator, a waveform digitizer (200 GSPS) and a picosecond-resolution time base (5ps). Unlike these predecessors it eliminates the bandwidth-constraining coax cable, the bulky console, and 90-97% of the cost. Because it is a true time domain device its readings are not derived from current and voltage magnitudes and relationships and hence are not impacted by soil electrical conductivity and compaction. Its high immunity to EC allows credible application in non-saturated soils wetted with sea water. It uses the standard SDI-12 interface and is compatible with all data recorders that are version 1.3 compliant.

Functions:

• Volumetric Water Content (0 to 100% with 0.1% resolution)

• Permittivity (1 to 80 with 0.1 unit resolution)

• Soil Electrical Conductivity a.k.a. Bulk EC (0 to 5000 μS/cm -resolution depends on reading range)

• Soil Temperature (-40 to +60 degrees C with 0.1 degree resolution)

• Pore Water Electrical Conductivity (0 to 55000 μS/cm)

This Pre-programmed Weather Station features data logger that stores your measurements in a fail-safe, non-volatile memory at user-defined intervals - until you transfer the data to your PC. Just plug in sensor suite, set your measurement intervals and start logging data. It measure air temperature, relative humidity, vapor pressure, barometric pressure, wind speed, gust and direction, solar radiation,  precipitation, lightning strike counter and distance. Memory to store > 40, 000 readings. More than 6-month battery power source (5 AA batteries). Complete with ATMOS 41 Sensor suite, PC Interface cable for downloading data to any Laptop/PC and an Indigenous tripod stand.

Non Recording Rain Gauge (200 cm sq) is manufactured from non-corrosive fiberglass reinforced plastic as per IS: 5225: 1969. It consists of collector assembled with Gunmetal Ring, Funnel, Locking Rings and Base. This Rain Gauge is supplied with Rain collector of 200-mm capacity and un-breakable 10-mm capacity rain measuring jar.

We offer Pressure Plate Apparatus. Are you in the search of Pressure Plate Apparatus Suppliers in India? If your answer is yes, then this is the best place for you. We provide precisely designed Pressure Plate Apparatus all over India. The Pressure Plate Apparatus is imported from globally recognized manufacturers. The accurate Pressure Plate Apparatus can be availed at very reasonable prices from us. The equipment is suitable for determination of pF-curves in the range pF2.0-4.2 (0.1-15 bar of suction). Furthermore, these are suitable for the calibration of soil moisture blocks or soil moisture measurement equipment. The standard set contains amongst others: two extractors with ceramic plates (0.1MPa, 0.3MPa and1.5MPa, resp. 1, 3 and 15bar) and accessories, soil samplerings, a pressure control panel and a compressor. Several ceramic plates with soil samples can be placed in the extract or at the same time. The pressure control panel is standard equipped with two manometers 0-2MPa and 0-0.4 MPa (resp.0-20barand0-4bar). The included compressor (220V 50Hz) is specifically designed for this purpose: maximum pressure 2.0MPa (20bar), built-in safety precautions, completely guarded and quiet.

We are a distinguished Supplier and Exporter of Drain Gauge Passive Capillary Lysimeter used to determine the volume of water and chemicals draining from the vadose zone into groundwater. Our firm offers customers a powerful range of Drain Gauge Passive Capillary Lysimeter to help understand better water balance and measure deep drainage. We accept all kinds of bulk and retail orders for Drain Gauge Lysimeters.

More information on Drain Gauge Lysimeters :

• Lysimeters are powerful tools that can help you better understand the water balance.
• The Drain Gauge G2 & G3 are low-cost options for measuring deep drainage.
• They are used to determine the volume of water and chemicals draining from the vadose zone into groundwater.

We are a renowned Exporter and Supplier of high grade Flow Probe that is widely used to measure accurate water flows in open channels and partially filled pipes. We are a dedicated firm delivering customers a wide range of Flow Probe loaded with positive displacement sensor and digital readout display features that make it ideal for sewer flow measurements, measuring flows in rivers and monitoring water velocity in ditches and canals.

More information on Flow Probe :

• The Flow Probe is a highly accurate water velocity instrument for measuring flows in open channels and partially filled pipes.
• The water velocity probe consists of a protected water turbo prop positive displacement sensor coupled with an expandable probe handle ending in a digital readout display. The water flow meter incorporates true velocity averaging for the most accurate flow measurements.
• The Flow Probe is ideal for storm water runoff studies, sewer flow measurements, measuring flows in rivers and streams, and monitoring water velocity in ditches and canals.

We are exporting and supplying the finest grade Geological Compass that is popularly used for measuring azimuths and dip angles. We only deal in well-designed Geological Compass that can be unlocked at the push of a button loaded with dip angle graduation features. We are well- equipped with a team of professionals who cater to all kinds of bulk and wholesale needs of customers from different parts of the world. 
More information on Geological Stratum Compass :

• All-metal, German-made geological compass, based on the design by Dr. Clar, University of Vienna, for measuring azimuths and dip angles.
• Hinged cover has a graduated vertical operation. Dip angle graduation is 5 degrees over a range of 225 degrees, with reliable estimation to 1 degree. Mirror mounted on the inside of the cover in combination with notch and bead sights on the face of the compass enable accurate sightings to distant objects.
• Compass graduations are 2 degrees with reliable estimation to 0.5 degrees. Compass needle is unlocked with a push button.

We are a well-established company engaged in the export and supply of Guelph Permeameter used in various industries to measure accuracy of the hydraulic conductivity, soil sorptivity and soil matrix flux potential. Our range of Guelph Permeameter is portable, lightweight and simple to use. We are backed with a reliable team that is efficient in handling all kinds of bulk and retail orders from worldwide customers.

More information on Guelph Permeameter :

• The Guelph Permeameter is used to obtain accurate measurements of hydraulic conductivity, soil sorptivity and soil matrix flux potential. These three factors govern how liquid move through an unsaturated soil profile.
• This lightweight instrument is portable, reliable and simple to use.
• Depending on the soil type, accurate results can be obtained in 1 to 2 hours using only 2.5 liters of water.

We are a distinguished Exporter and Supplier of the KD2 Pro Thermal Properties Analyser that is widely used to measure thermal diffusivity, thermal conductivity, and thermal resistivity in various fields. We are backed with a reliable team of professionals who are well equipped to handle all kinds of bulk and retail orders from both domestic and international customers, and assure timely deliveries. We make available KD2 Pro Thermal Properties Analyser at reasonable price.

More information on KD2 Pro Thermal Properties Analyser :

• The KD2-Pro is a fully portable field and lab thermal properties analyser.
• It uses the transient line heat source method to measure thermal diffusivity, specific heat (heat capacity), thermal conductivity, and thermal resistivity. Complies with international Standards.
• The KD2 Pro uses 3 sensors to measure thermal diffusivity, specific heat, conductivity and resistivity.
• The KD2 Pro allows unattended (user programmable) measurements and on-board data storage with space for over 4, 000 measurements.

We are an esteemed company engaged in exporting and supplying Leaf Porometer that is used in everyday research to study accurate stomatal conductance measurements. We contain authorized dealership to provide customers such intricate research machinery. We are well equipped with a team of well-trained professionals to procure the best. We accept all kinds of bulk and wholesale orders from worldwide customers and assure consumers immediate deliveries as per request.

More information on Leaf Porometer :

• The SC-1 Leaf Porometer makes accurate stomatal conductance measurements affordable and practical for everyday research.
• Steady state design means that it has no moving parts. The SC-1 leaf porometer leaves the environment alone, and instead determines stomatal conductance by measuring the actual vapor flux from the leaf through the stomates and out to the environment.
• Readings can be shown as either conductance or resistance and saved for downloading later (RS232 cable and download utility software included).

We are the most trusted name engaged in exporting and supplying Plant Canopy Analyser that is ideal for measuring above and below canopy PAR interception and calculate leaf area index at any plant or forest canopy. Our firm is dedicated to deliver customers high quality products that can even be used in extreme weather conditions. We accept all kinds of bulk orders from worldwide buyers.

More information on Plant Canopy Analyser (Ceptometer) :

• Measure Canopy PAR and Calculate LAI. The AccuPAR model LP-80 is a lightweight, portable, linear photosynthetically active radiation (PAR) sensor.
• It lets you measure canopy PAR interception and calculate leaf area index (LAI) at any location within a plant or forest canopy.
• The included external PAR sensor can be used to make simultaneous above- and below-canopy PAR measurements. Using both the external sensor and the AccuPAR together allows you to get accurate PAR and LAI data in clear, partly cloudy, or overcast sky conditions.

We are one of the leading Exporters and Suppliers of Point Source Bailer that is widely used to derive samples from distinct underground levels. We offer our customers a wide range of Point Source Bailer made of stainless steel loaded with dual ball valves narrow tubes and direct push device features. We are well equipped to handle all kinds of retail, bulk and wholesale orders from international and domestic customers.

More information on Point Source Bailer :

• The Point Source Bailer is stainless steel and has dual ball valves, top and bottom. This prevents a sample collected at a discrete depth from mixing with water from other depths during retrieval.
• It is a simple and cost effective device for aquifer profiling, and collecting samples from distinct levels.
• Purging and disposal of purge water can be avoided while using this device.
• The miniature 0.5" (12.7 mm) diameter model is ideal for use in narrow tubes and direct push devices.

Our firm is renowned for exporting and supplying Suction Lysimeters to worldwide markets. We are a leading firm that believes in providing customers advanced technology Suction Lysimeter used to measure nitrate levels, salinity and other chemical elements from various depths. We are well equipped with a team of skilled workers who are efficient in handling all kinds of bulk orders and assure our customers a timely delivery.

More Information on Suction Lysimeter :

• The SSAT is a suction lysimeter that allows extraction of soil water samples from various depths for measurement of nitrate levels, salinity, EC, and other chemical elements.
• When used in conjunction with tissue analysis for calibration, nutrient management practices can be developed which allow the grower to adjust the rate and timing of fertilizer applications, resulting in increased production with decreased fertilizer costs and reduced nutrient leaching.
• SSAT's are available in standard lengths between 6" and 72" and include a single suction line, stopper, and finger clamp.

We are a distinguished Supplier and Exporter of Temperature RH Data Logger Recorder that is specifically designed to record up to 16, 000 temperature readings. We have in store a range of some of the most advanced and updated Temperature RH Data Logger Recorder with point indication, selectable data sampling rates, user-programmable alarm thresholds, and status indication features. We accept all kinds of bulk, retail and wholesale orders from consumers.

More Information on Temperature RH Data Logger Recorder :

• This Temp-RH Data logger records up to 16, 000 humidity readings and 16, 000 temperature readings.
• You can choose from two start methods, instant or manual. Data loggers feature dew point indication, selectable data sampling rates, user-programmable alarm thresholds, and status indication by LED.
• Each data logger comes complete with a 3.6V Lithium battery, protective USB cap, mounting bracket, and Window®-compatible software for analysis.

Wind Data Logger devices supplied and exported by us to various markets of the world are compact, inexpensive and designed to store humongous data. We provide our customers the latest technology Wind Data Logger ideal in recording Wind Speed and Wind Direction of 16-point resolution. We are backed with a team of skilled workers who are readily accept various kinds of bulk orders from various customers.

More Information on Wind Data Logger :

• The WindLog is a compact, inexpensive wind data logger, designed to record Wind Speed and Wind Direction.
• The wind logger contains enough memory to store one year data and operates on three AA batteries. Battery life is around 6 months.
• The Mini-Aervane wind sensor is equipped with low friction race bearings. This reduces the threshold to approximately 1 mile per hour.
• The wind direction sensor has a 16-point resolution. Logged direction readings are averaged readings. Each WindLog ships with a free Windows based application, WindSoft. WindSoft,  can generate statistics, graphs and reports.

We are the best destination for those who are in the search of recognized Estwing Hammer importers and suppliers in india. The company has been engaged in offering estwing hammer in india since a long time. The estwing hammers, offered by us, are sourced from trustworthy manufacturers. Estwing hammer is perfectly designed using hi-grade material in hi-tech manufacturing setups. The estwing leather grip rock pick is forged one-piece solid steel with a polished and formed leather grip.

We offer Concrete Test Hammer in india, this is the right place. We are associated with globally trusted manufacturers of concrete test hammer. The concrete test hammer, we offer, is ahead of all the other variants available in the market as it is manufactured using advanced technology. The accurately designed concrete test hammer is made available at reasonable prices. why our concrete test hammer? the concrete test hammer is for non-destructive testing of the surface of hardened concrete in order to evaluate the strength in various parts of any structure. The concrete hammer is supplied complete with plastic carrying case, grinding stone, and instruction manual.

We offer Silva Compass. For those who have been looking for reliable Silva Compass suppliers, this is the perfect destination. We offer imported silva compass in all parts of india. The well-designed silva compass is appreciated for accuracy in fields that are the likes of geology and marine. Immediately place your query for silva compass to get it at the best price.

• High grade steel needle with jewel bearing
• Balanced for northern hemisphere
• Adjustable declination correction
• Liquid filled capsule for stable operation
• Mirror for sighting bearings and signaling
• Sighting hole and notch for accurate bearings
• Clinometer
• Luminescent markings for working in low light
• Metric UTM scales and inch ruler
• Baseplate with magnifying lens
• Detachable snap-lock lanyard with wristlock. Easy to detach for workingwith the map
• Suunto limited lifetime warranty
• Made in Finland