Conductor size: 0.8 mm to 3.5 mmMaximum coil diameter: 330 mm.Maximum coil width: 175 mmShape of coil: Concentric circular, Maximum coil weight: 15 KgCoil holding: Shaft type. Shaft mounted on heavy duty bearings. Core and flange locking by nut with handle.Centre height: 1000 mm.Drive: By 2 HP A C Motor with Variable frequency drive.

Material :Polypropylene.Strap width: 6 mm, 9mm, 12, 15and, 19 mm and thickness up to 0.8 mm Max coil weight: 20kgMax coil outside dia: 550mm Paper Core loading: 3inch, 4inch and , 8 inch outside diameter core made of aluminum will be suppliedCoil width : 165 mm to 190mm Coil holding: Shaft type. Core locking by nut.

Drum Dimensions Flange dia: 2400 mm Max , Max drum width: 1500 mmMax cross section of wound conductor: 120 Sq. mmNo of conductors: 8 NoWinding tension: 15 Kg Cm2Max torque: 300 Kg m

Machine construction : The bobbin loaded between head stock and tail stock. Gearbox, drive motor , traverse assembly are mounted on a platform supported on LM blocks and railThe whole machine with bobbin , drive motor and associated assemblies will be traversing on the base frame. The linear movement of the platform is with Rollring Traverse system. The complete assembly is mounted on a base frame.

Linear speed and traverse Stroke length can be very finely controlled .

Bobbin holding : Pintle type, between Head stock and Tail stock

Head stock: Head stock is mounted on sturdy housing with heavy duty bearingswith grease lubrication. Drive from motor and reduction gear box is transmitted tohead stock shaft by Timer Belt

Tail stock: Tail stock shaft assembled on a sturdy housing with heavy duty bearings. Tail stock will be operated by 2 No Air cylinder, solenoid valve and Push buttons .

TraversingMechanism : By Rollring Traverse unit. Traverse unit will be stationary and shaft will be traversing.

Pitch adjustment :The traverse pitch can be adjusted on the dial of the Traverse unit as required.

Tensioning roller stand: Provided for guiding and tensioning.

Machine operation by foot switch. Reverse running by selector switch

Coil holding: Shaft type. Core locking by nut. Suitable square thread will be provided for easy locking. 2 Nos slotted flanges will be provided

Brake : Pneumatically operated disc brake. Dynamic braking with brake resistor in the drive. During stopping, the machine will stop with dynamic braking and the pneumatic braking will be applied after slowing down. Brake will be always holding type.

Coil shaft mounting: Coil shafts will be assembled on a sturdy housing with heavy duty bearings.

Max Coil shaft rpm: 300 RPM, Variable speed by potentiometer.

Drive : 2 HP AC motor, (415 Volt, 50 Hz, 1500 RPM) AC Variable frequency drive for speed variation and Dynamic braking with brake resistor will be provided.

Turns counter : Mechanical / Electronic counter

Control panel : Control panel with variable frequency drive and accessories will be supplied.

TENSIONING STAND FOR WIRE

Max wire size : 3.5 mm (Max)- 0.6 mm (Min)

The tensioning stand is mounted on a shaft assembled on the base plate. Swiveling arm is spring loaded and pulleys are mounted suitably to adjust and control tension in the wire.

Bobbin stand: Bobbin stand is provided for loading the Pay off bobbin.

Bobbin loading :On a Cantilever shaft with Tapered Pintles. Bobbin locking by nut.

Wire Tensioning : By Brake Band

Machine Model: RWC 1350.Speed: Variable speed by potentiometerFormer Mandrel loading . Between spindle shaft and roller support on the tail stock end. Tail Stock adjustable on Rails, Spindle Projection : 75 mm Square x 300 mm long integral to the spindle shaft.Centre height :1350 mmMotor : Suitable motor with variable frequency drive with Reduction gear box.Turns Counter: Mechanical counter .Brake: Electromagnetic brake Disc BrakeMachine operation: By Foot switch . Reverse running by selector switch.

Conductor size: 0.8 mm to 3.5 mmMaximum coil diameter: 330 mm.Maximum coil width: 175 mmShape of coil: Concentric circular, Maximum coil weight: 15 KgCoil holding: Shaft type. Shaft mounted on heavy duty bearings. Core and flange locking by nut with handle.Centre height: 1000 mm.Drive: By 2 HP A C Motor with Variable frequency drive.

Material :Polypropylene.Strap width: 6 mm, 9mm, 12, 15and, 19 mm and thickness up to 0.8 mm Max coil weight: 20kgMax coil outside dia: 550mm Paper Core loading: 3inch, 4inch and , 8 inch outside diameter core made of aluminum will be suppliedCoil width : 165 mm to 190mm Coil holding: Shaft type. Core locking by nut.

Drum Dimensions Flange dia: 2400 mm Max , Max drum width: 1500 mmMax cross section of wound conductor: 120 Sq. mmNo of conductors: 8 NoWinding tension: 15 Kg Cm2Max torque: 300 Kg m

Machine construction : The bobbin loaded between head stock and tail stock. Gearbox, drive motor , traverse assembly are mounted on a platform supported on LM blocks and railThe whole machine with bobbin , drive motor and associated assemblies will be traversing on the base frame. The linear movement of the platform is with Rollring Traverse system. The complete assembly is mounted on a base frame.

Linear speed and traverse Stroke length can be very finely controlled .

Bobbin holding : Pintle type, between Head stock and Tail stock

Head stock: Head stock is mounted on sturdy housing with heavy duty bearingswith grease lubrication. Drive from motor and reduction gear box is transmitted tohead stock shaft by Timer Belt

Tail stock: Tail stock shaft assembled on a sturdy housing with heavy duty bearings. Tail stock will be operated by 2 No Air cylinder, solenoid valve and Push buttons .

TraversingMechanism : By Rollring Traverse unit. Traverse unit will be stationary and shaft will be traversing.

Pitch adjustment :The traverse pitch can be adjusted on the dial of the Traverse unit as required.

Tensioning roller stand: Provided for guiding and tensioning.

Machine operation by foot switch. Reverse running by selector switch

Coil holding: Shaft type. Core locking by nut. Suitable square thread will be provided for easy locking. 2 Nos slotted flanges will be provided

Brake : Pneumatically operated disc brake. Dynamic braking with brake resistor in the drive. During stopping, the machine will stop with dynamic braking and the pneumatic braking will be applied after slowing down. Brake will be always holding type.

Coil shaft mounting: Coil shafts will be assembled on a sturdy housing with heavy duty bearings.

Max Coil shaft rpm: 300 RPM, Variable speed by potentiometer.

Drive : 2 HP AC motor, (415 Volt, 50 Hz, 1500 RPM) AC Variable frequency drive for speed variation and Dynamic braking with brake resistor will be provided.

Turns counter : Mechanical / Electronic counter

Control panel : Control panel with variable frequency drive and accessories will be supplied.

TENSIONING STAND FOR WIRE

Max wire size : 3.5 mm (Max)- 0.6 mm (Min)

The tensioning stand is mounted on a shaft assembled on the base plate. Swiveling arm is spring loaded and pulleys are mounted suitably to adjust and control tension in the wire.

Bobbin stand: Bobbin stand is provided for loading the Pay off bobbin.

Bobbin loading :On a Cantilever shaft with Tapered Pintles. Bobbin locking by nut.

Wire Tensioning : By Brake Band

Machine Model: RWC 1350.Speed: Variable speed by potentiometerFormer Mandrel loading . Between spindle shaft and roller support on the tail stock end. Tail Stock adjustable on Rails, Spindle Projection : 75 mm Square x 300 mm long integral to the spindle shaft.Centre height :1350 mmMotor : Suitable motor with variable frequency drive with Reduction gear box.Turns Counter: Mechanical counter .Brake: Electromagnetic brake Disc BrakeMachine operation: By Foot switch . Reverse running by selector switch.