RIGPL manufactures Coolant Fed Carbide Drills or also known as Through coolant Carbide Drills; as the name suggests these Carbide Drills comes with the 2 or 3 Helical Coolant holes depending upon customer request.

Features

• RIGPL's Carbide Coolant Fed Carbide Drills is only available drilling Solution to all type of Drilling problems like intermittent, deep-hole, blind hole & other type of drilling applications.
• Carbide Coolant Fed Drills will increase your productivity to new level while drilling in CI upto 400BHN, Alloy steel, SS, Titanium, Nickel Alloys & other difficult to machine materials,
• Carbide Drills comes with Super Finish on the surface for smoother chip evacuation,
• Smoother & tighter tolerances holes are achieved,
• Reaming is minimized with the stiffer tolerances are achieved with RIGPL's Coolant Fed Carbide Drills.

1. C3HS Carbide Drill series meant for 3 L/D to 5 L/D machining depths : Our testing results shows that C3HS can reduce the CPC by at least 30-50% in your Drilling application.
2. C3HL Carbide Drill series meant for 5 L/D to 8 L/D machining depths :Results show approximately 30-50% reduction in CPC with our new C3HS or C3HL Carbide Drills from the other competitors in the market.

1. Superior Design clubbed with UMG (Ultra Fine carbide grain size),
2. Newly developed NOVA coating,
3. Works at faster feed & speed rates then never before,
4. Improves productivity & achieves unmatchedLife
5. Less than 10-microns Run-Out

• HSS Straight Flute Plug Tap (Second Tap) manufactured in HSS M2 grade
• These HSS Taps are suitable for general tapping for all materials
• These are most Economical Machine Taps in RIGPL's range of Tapping Tools
• Best for Tapping on materials that produce shorter chips like Cast Iron, SG Iron, MS etc.
• We provide Coated HSS Machine Taps in TiN, TiALN, etc on request

RIGPL manufactures Coolant Fed Carbide Drills or also known as Through coolant Carbide Drills; as the name suggests these Carbide Drills comes with the 2 or 3 Helical Coolant holes depending upon customer request.

Features

• RIGPL's Carbide Coolant Fed Carbide Drills is only available drilling Solution to all type of Drilling problems like intermittent, deep-hole, blind hole & other type of drilling applications.
• Carbide Coolant Fed Drills will increase your productivity to new level while drilling in CI upto 400BHN, Alloy steel, SS, Titanium, Nickel Alloys & other difficult to machine materials,
• Carbide Drills comes with Super Finish on the surface for smoother chip evacuation,
• Smoother & tighter tolerances holes are achieved,
• Reaming is minimized with the stiffer tolerances are achieved with RIGPL's Coolant Fed Carbide Drills.

1. C3HS Carbide Drill series meant for 3 L/D to 5 L/D machining depths : Our testing results shows that C3HS can reduce the CPC by at least 30-50% in your Drilling application.
2. C3HL Carbide Drill series meant for 5 L/D to 8 L/D machining depths :Results show approximately 30-50% reduction in CPC with our new C3HS or C3HL Carbide Drills from the other competitors in the market.

1. Superior Design clubbed with UMG (Ultra Fine carbide grain size),
2. Newly developed NOVA coating,
3. Works at faster feed & speed rates then never before,
4. Improves productivity & achieves unmatchedLife
5. Less than 10-microns Run-Out

• HSS Straight Flute Plug Tap (Second Tap) manufactured in HSS M2 grade
• These HSS Taps are suitable for general tapping for all materials
• These are most Economical Machine Taps in RIGPL's range of Tapping Tools
• Best for Tapping on materials that produce shorter chips like Cast Iron, SG Iron, MS etc.
• We provide Coated HSS Machine Taps in TiN, TiALN, etc on request