Chemical Dosing Pump with (RC 11) is manufactured, exported and supplied by us in Kolkata, West Bengal. Our Chemical Dosing Pump finds its application in diverse industrial units. We make sure that Chemical Dosing Pump that we provide is made as per high industrial standards. We use premium metal for making Chemical Dosing Pumps that gives good strength and durability to the product. Salient Features

• Glandless and Leakage free diaphragm pumps
• Solenoid driven pulsar circuit
• Excellent proportional control & injection frequency
• Unique double ball check cartridge for dosing accuracy and anti syphon system
• Teflon faced Hypalon diaphragm for long lasting
• Suction lift 3 mts.
• Integrated low level switch (as optional)

Materials Of Construction

• Housing : G. F. P. P.
• Spacer & Head : Poly Proplene/PVC
• Diaphragm : Teflon faced Hypalon
• Ball : P T F E /Ceramic
• Suction/Discharge Tubing : HDPE/LDPE
• Suction / Discharge valve : PP/PVC

Accessories

• Suction / Discharge Tube: 3 mts (roll)
• Antisyphon / Non Return Valve: 01 no.
• Self Balanced Foot Valve: 01 no.

Optional Accessories

• Integrated low level switch
• PVC/FRP solution storage/preparation tank with level gauge
• Agitator (SS/PP) with motor (Slow/high speed)
• Agitator (SS/PP) with gear motor

The System Consists Of The Following Accessories

• 100 liters cap hopper bottom F R P construction solution preparation cum storage tank with lid, level gauge, water inlet, solution outlet and sludge drain connection.
• Combined Gear & motor assembly or only motor
• Motor - 1500 RPM / 960 RPM, 440 / 220 V 50 Hz
• SS-316/PP agitator with sweep blade
• Facilitate with Port hole, pump mounting facility on lid
• The total unit is portable and can install at any place for disinfection/bacteria free drinking water

Above Dosing pump with suction / discharge tubing, foot valve, strainer, injection check valve etc. suitable to dose AQUAFIT / CHLOROTECH - 90 chlorine granular. The fluid is contained within a flexible tube fitted inside a circular pump casing. A rotor with a number of rollers attached to the external circumference and it compresses the flexible tube. As the rotor turns, the part of tube under compression close; thus forcing the fluid to be pumped to move through the tube. Accordingly, as the tube opens to its natural shape after passing of the cam fluid, flow is induced to the pump. RPQ 40 HD is typically used to pump clean, sterile or aggressive fluid. RPQ 40 HD is least maintenance and leakage free pump as there is on other valves, O Rings, seals / packing except to worry about the tube for the fluid being pumped. The tube needs frequent replacement, generally once in 4 to 8 months.

MODEL: RPQ 40HD CAP. 02 USGPD to 40 USGPD at 100 psig. Rs.90, 000/-

R M CO, a Kolkata West Bengal in India Based Company is Manufacturers of Dosing Pumps Such as RM Series Chemical Dosing Pumps, PlungerPiston Type Chemical Dosing Pumps, RC SeriesRB Series Chemical Dosing PumpsRPQ 40 HD Single High Pressure Adjusttable Gear Motor Dosing Pump etc. RM series is a reciprocating mechanically actuated diaphragm dosing pumps suitable for dosing quantities of liquid products upto 200 lph through a pulse is generated when piston moves forward. The pump capacity is proportional to the number of piston stroke and to the pump head internal volume. Glandless & leakage free diaphragm pump, excellent proportional control & injection frequency, anti-siphon valve, Teflon faced hypalon diaphragm for long lasting. Suction lift- 1.5 mtrs(maximum).

RM series is a reciprocating mechanically actuated diaphragm dosing pumps suitable for dosing quantities of liquid products upto 200 lph through a pulse is generated when piston moves forward. The pump capacity is proportional to the number of piston stroke and to the pump head internal volume. Glandless & leakage free diaphragm pump, excellent proportional control & injection frequency, anti-siphon valve, Teflon faced hypalon diaphragm for long lasting. Suction lift- 1.5 mtrs(maximum).

We offer high-quality Chemical Dosing Pump with model no. (RC 10). Our Chemical Dosing Pump is manufactured as per high industrial standards. We make sure that our Chemical Dosing Pump is quality-tested before final dispatch to the customers. Our Chemical Dosing Pump is easy to operate and requires low maintenance. Therefore, we are regarded as well-acknowledged Manufacturer, Exporter and Supplier of Chemical Dosing Pump in Kolkata, West Bengal. Salient Feature

• Glandless & Leakage free pumps
• Electromagnetic Solenoid driven pulsar circuit
• Excellent proportional control and injection frequency
• Special G. F. P. P.
• Long life housing
• Suction lift 3 mts.
• Integrated low level switch (as optional)

Materials Of Construction

• Housing : G. F. P. P.
• Spacer & Head : Poly Proplene/P V C
• Diaphragm : Teflon faced Hypalon
• Ball : P T F E/Ceramic
• Suction/Discharge Tubing : HDPE/LDPE
• Suction/Discharge valve : PP/PVC Accessories
  • Suction / Discharge Tube : 3 mts. (roll)
  • Antisyphon / Non Return Valve : 01 no.
  • Self Balanced Foot Valve : 01 no.
  Optional Accessories
  • Integrated low level switch
  • PVC/FRP solution storage / preparation tank with level gauge
  • Agitator (SS/PP) with motor (Slow/High Speed)
  • Agitator (SS/PP) with Gear Motor
  Model
  • Max discharge lph
  • Max working pressure kg/cm²

RMP series Plunger / piston pumps are positive displacement type, which are designed to pump at practically constant flow rates upto 3000 LPH against a wide range of various discharge pressure (high or low). The motor repeatedly moves the plunger into and out of a correspondingly shaped chamber in the pump head, causing the volume of chamber to repeatedly become larger and smaller and thus causing the liquid to enter into the head from suction end and discharge to dosing end. The pump capacity is proportional to the number of piston stroke and to the pump head internal volume. A simple gear and eccentric mechanism drive the plunger. The eccentricity is varied, resulting to increase and decrease stroke length. The metering rate can adjust by varying the stroke length with 0% to 100% stroke adjustment manually.

This pump works continuously in pulsar rating; each time a pulse is given to the magnet, which in turn push a piston. A diaphragm fixed on the piston head compressed the liquid in the pump head. The liquid exits the pump head through the delivery valve while the suction valve stays close. When the pulse ends, a spring moves back the piston and the diaphragm. The vacuum created by the diaphragm backward movement brings the liquid inside the pump head from the suction valve while the delivery valve is closed. The pump capacity is proportional to the number of piston strokes and to the pump head internal volume

Based in Kolkata, West Bengal, we are engaged in manufacturing, exporting and supplying PTFE Diaphragm Pump. Our PTFE Diaphragm Pump is made in conformity with international standards and therefore, it is widely demanded throughout the market. Made premium metal, our PTFE Diaphragm Pump is very strong and durable. Salient Features Of Our PTFE Diaphragm Pump

• Glandless and leakage free diaphragm pump
• Excellent proportional control & injection frequency
• Unique double ball check cartridge for dosing
• Accuracy and anti-syphon system
• Teflon faced Hypalon Diaphragm for long lasting
• Motor driven worm shaft & worm wheel drive
• Turn down ration 10:1
• Liquid end materials construction in PP (SS 316, PVC or Teflon are on request)
• Suction lift 1.5 mts.

Materials Of Construction

• Housing : Cast Aluminium
• Spacer & Head : Poly Proplene / PVC
• Diaphragm : Teflon faced Hypalon
• Ball : PTFE / Ceramic
• Suc / Disc tube : HDPE / LDPE
• Suc / Disc Ball Cartridge : PP / PVC

Operation SystemThis pumps works continuously under pulser dose. Each time a pulser is generated when piston moves forward. A Teflon faced diaphragm fixed on piston head compresses the liquid in the head. The liquid exits from the pump head through the discharge valve while the suction valve stay close. When the pulse end, a spring moves back the piston and the diaphragm. The Vacuum created by the diaphragm opens suction valve while the discharge valve stays close. The pump capacity is proportional to the number of piston stroke and to the pump head internal volume. Accessories

• LDPE / Nylon tubing : 1.5 mts.
• Spring assisted injection check valve
• Self balanced Foot valve
• Y strainer (Optional)
• Pressure Relief Valve

RM Series Motor Driven Dosing PumpRM series motor driven & actuated diaphragm dosing pumps are operated by a 0.5 HP, 1440 RPM squirrel cage induction motor ( input power supply - 415 / 3 phase / 50Hz ZC ) reciprocating operation

Chemical Dosing Pump with (RC 11) is manufactured, exported and supplied by us in Kolkata, West Bengal. Our Chemical Dosing Pump finds its application in diverse industrial units. We make sure that Chemical Dosing Pump that we provide is made as per high industrial standards. We use premium metal for making Chemical Dosing Pumps that gives good strength and durability to the product. Salient Features

• Glandless and Leakage free diaphragm pumps
• Solenoid driven pulsar circuit
• Excellent proportional control & injection frequency
• Unique double ball check cartridge for dosing accuracy and anti syphon system
• Teflon faced Hypalon diaphragm for long lasting
• Suction lift 3 mts.
• Integrated low level switch (as optional)

Materials Of Construction

• Housing : G. F. P. P.
• Spacer & Head : Poly Proplene/PVC
• Diaphragm : Teflon faced Hypalon
• Ball : P T F E /Ceramic
• Suction/Discharge Tubing : HDPE/LDPE
• Suction / Discharge valve : PP/PVC

Accessories

• Suction / Discharge Tube: 3 mts (roll)
• Antisyphon / Non Return Valve: 01 no.
• Self Balanced Foot Valve: 01 no.

Optional Accessories

• Integrated low level switch
• PVC/FRP solution storage/preparation tank with level gauge
• Agitator (SS/PP) with motor (Slow/high speed)
• Agitator (SS/PP) with gear motor

The System Consists Of The Following Accessories

• 100 liters cap hopper bottom F R P construction solution preparation cum storage tank with lid, level gauge, water inlet, solution outlet and sludge drain connection.
• Combined Gear & motor assembly or only motor
• Motor - 1500 RPM / 960 RPM, 440 / 220 V 50 Hz
• SS-316/PP agitator with sweep blade
• Facilitate with Port hole, pump mounting facility on lid
• The total unit is portable and can install at any place for disinfection/bacteria free drinking water

Above Dosing pump with suction / discharge tubing, foot valve, strainer, injection check valve etc. suitable to dose AQUAFIT / CHLOROTECH - 90 chlorine granular. The fluid is contained within a flexible tube fitted inside a circular pump casing. A rotor with a number of rollers attached to the external circumference and it compresses the flexible tube. As the rotor turns, the part of tube under compression close; thus forcing the fluid to be pumped to move through the tube. Accordingly, as the tube opens to its natural shape after passing of the cam fluid, flow is induced to the pump. RPQ 40 HD is typically used to pump clean, sterile or aggressive fluid. RPQ 40 HD is least maintenance and leakage free pump as there is on other valves, O Rings, seals / packing except to worry about the tube for the fluid being pumped. The tube needs frequent replacement, generally once in 4 to 8 months.

MODEL: RPQ 40HD CAP. 02 USGPD to 40 USGPD at 100 psig. Rs.90, 000/-

R M CO, a Kolkata West Bengal in India Based Company is Manufacturers of Dosing Pumps Such as RM Series Chemical Dosing Pumps, PlungerPiston Type Chemical Dosing Pumps, RC SeriesRB Series Chemical Dosing PumpsRPQ 40 HD Single High Pressure Adjusttable Gear Motor Dosing Pump etc. RM series is a reciprocating mechanically actuated diaphragm dosing pumps suitable for dosing quantities of liquid products upto 200 lph through a pulse is generated when piston moves forward. The pump capacity is proportional to the number of piston stroke and to the pump head internal volume. Glandless & leakage free diaphragm pump, excellent proportional control & injection frequency, anti-siphon valve, Teflon faced hypalon diaphragm for long lasting. Suction lift- 1.5 mtrs(maximum).

RM series is a reciprocating mechanically actuated diaphragm dosing pumps suitable for dosing quantities of liquid products upto 200 lph through a pulse is generated when piston moves forward. The pump capacity is proportional to the number of piston stroke and to the pump head internal volume. Glandless & leakage free diaphragm pump, excellent proportional control & injection frequency, anti-siphon valve, Teflon faced hypalon diaphragm for long lasting. Suction lift- 1.5 mtrs(maximum).

We offer high-quality Chemical Dosing Pump with model no. (RC 10). Our Chemical Dosing Pump is manufactured as per high industrial standards. We make sure that our Chemical Dosing Pump is quality-tested before final dispatch to the customers. Our Chemical Dosing Pump is easy to operate and requires low maintenance. Therefore, we are regarded as well-acknowledged Manufacturer, Exporter and Supplier of Chemical Dosing Pump in Kolkata, West Bengal. Salient Feature

• Glandless & Leakage free pumps
• Electromagnetic Solenoid driven pulsar circuit
• Excellent proportional control and injection frequency
• Special G. F. P. P.
• Long life housing
• Suction lift 3 mts.
• Integrated low level switch (as optional)

Materials Of Construction

• Housing : G. F. P. P.
• Spacer & Head : Poly Proplene/P V C
• Diaphragm : Teflon faced Hypalon
• Ball : P T F E/Ceramic
• Suction/Discharge Tubing : HDPE/LDPE
• Suction/Discharge valve : PP/PVC Accessories
  • Suction / Discharge Tube : 3 mts. (roll)
  • Antisyphon / Non Return Valve : 01 no.
  • Self Balanced Foot Valve : 01 no.
  Optional Accessories
  • Integrated low level switch
  • PVC/FRP solution storage / preparation tank with level gauge
  • Agitator (SS/PP) with motor (Slow/High Speed)
  • Agitator (SS/PP) with Gear Motor
  Model
  • Max discharge lph
  • Max working pressure kg/cm²

RMP series Plunger / piston pumps are positive displacement type, which are designed to pump at practically constant flow rates upto 3000 LPH against a wide range of various discharge pressure (high or low). The motor repeatedly moves the plunger into and out of a correspondingly shaped chamber in the pump head, causing the volume of chamber to repeatedly become larger and smaller and thus causing the liquid to enter into the head from suction end and discharge to dosing end. The pump capacity is proportional to the number of piston stroke and to the pump head internal volume. A simple gear and eccentric mechanism drive the plunger. The eccentricity is varied, resulting to increase and decrease stroke length. The metering rate can adjust by varying the stroke length with 0% to 100% stroke adjustment manually.

This pump works continuously in pulsar rating; each time a pulse is given to the magnet, which in turn push a piston. A diaphragm fixed on the piston head compressed the liquid in the pump head. The liquid exits the pump head through the delivery valve while the suction valve stays close. When the pulse ends, a spring moves back the piston and the diaphragm. The vacuum created by the diaphragm backward movement brings the liquid inside the pump head from the suction valve while the delivery valve is closed. The pump capacity is proportional to the number of piston strokes and to the pump head internal volume

Based in Kolkata, West Bengal, we are engaged in manufacturing, exporting and supplying PTFE Diaphragm Pump. Our PTFE Diaphragm Pump is made in conformity with international standards and therefore, it is widely demanded throughout the market. Made premium metal, our PTFE Diaphragm Pump is very strong and durable. Salient Features Of Our PTFE Diaphragm Pump

• Glandless and leakage free diaphragm pump
• Excellent proportional control & injection frequency
• Unique double ball check cartridge for dosing
• Accuracy and anti-syphon system
• Teflon faced Hypalon Diaphragm for long lasting
• Motor driven worm shaft & worm wheel drive
• Turn down ration 10:1
• Liquid end materials construction in PP (SS 316, PVC or Teflon are on request)
• Suction lift 1.5 mts.

Materials Of Construction

• Housing : Cast Aluminium
• Spacer & Head : Poly Proplene / PVC
• Diaphragm : Teflon faced Hypalon
• Ball : PTFE / Ceramic
• Suc / Disc tube : HDPE / LDPE
• Suc / Disc Ball Cartridge : PP / PVC

Operation SystemThis pumps works continuously under pulser dose. Each time a pulser is generated when piston moves forward. A Teflon faced diaphragm fixed on piston head compresses the liquid in the head. The liquid exits from the pump head through the discharge valve while the suction valve stay close. When the pulse end, a spring moves back the piston and the diaphragm. The Vacuum created by the diaphragm opens suction valve while the discharge valve stays close. The pump capacity is proportional to the number of piston stroke and to the pump head internal volume. Accessories

• LDPE / Nylon tubing : 1.5 mts.
• Spring assisted injection check valve
• Self balanced Foot valve
• Y strainer (Optional)
• Pressure Relief Valve

RM Series Motor Driven Dosing PumpRM series motor driven & actuated diaphragm dosing pumps are operated by a 0.5 HP, 1440 RPM squirrel cage induction motor ( input power supply - 415 / 3 phase / 50Hz ZC ) reciprocating operation