Our Products
RITIKA SystemsSolar PV Interfaces are designed for customers who have already invested in a domestic inverter and battery set, and now desire to switch to solar power. They may use this system to integrate solar PV charging in a simple and cost efficient manner.
Being an-add on to the existing domestic inverter, this offers a very cost efficient way of converting an existing domestic inverter (already owned by the customer) into Solar Power Conditioning Unit (Solar Inverter + Battery Charge Controller). Interface can automatically sense 12V/24V system and work accordingly.
OBJECTIVE:-
CONNECTION DIAGRAM
Module Wattage | 0.5 KWp to 500 KWp |
Battery Bank Voltage Options | 24, 48, 96, 110, 120, 240 Volts DC. Or 220 / 240 Volts 50 Hz A/C |
Type of Battery Bank | Consisting of 2/6 Volts cells of Positive tubular plate type conforming to IS 1651 or any other type as per customer's requirements |
PCU (Inverter+Charge Controller) | As per customer requirements |
Distribution | Underground / overhead as per customer requirements |
Earthing | Single conductor (positive or negative) Earthing or centre tap Earthing |
Loads | As per customer's requirements |
RSPLoffers a wide range ofSolar Garden Lights & Lamp Postwith standard and custom built versions.
PROVISIONS | |
GENERAL SPECIFICATIONS |
PROVISIONS | |
|
RITIKAPCUs are designed for small Solar Power Applications. These conform to the requirements of MNRE for performance, environmental and IP Testing. These can be applied to systems for MNREs NABARD and allied schemes as well as remote site applications where grid may or may not be available. FEATURES
|
Ratings |
150VA |
300VA |
500VA |
1KVA |
2KVA |
||
Model no. |
RPCU12–150 |
RPCU12–300 |
RPCU12–500 |
RPCU24–1K |
RPCU48–2K |
||
Technology |
Micro Controller Based Using MOSFETS |
||||||
I/P Parameters |
|||||||
Nominal Input Voltage |
12V |
24V |
48V |
||||
Battery |
100Ah |
150Ah |
200Ah to 300 Ah |
300Ah to 600Ah |
300Ah to 600Ah |
||
Ac mains range |
180V AC – 270V AC |
||||||
Max. Mains Chg. Current |
06A |
10A |
10A |
||||
O/P Parameters |
|||||||
Wave form type |
SINE WAVE |
||||||
Inverter Type |
BI – DIRECTIONAL |
||||||
O/P Voltage Regulation |
230V + 2% |
||||||
Output Frequency |
50Hz + 0.5 Hz |
||||||
Inverter Efficiency |
> 85% |
||||||
THD |
< 5% (on linear load) |
||||||
Solar Charge Controller |
|||||||
Type |
PWM type Series Regulator (– ve common) |
||||||
Max. Array voltage |
25V |
45V |
85V |
||||
Max. Chg. Current |
20A |
40A |
|||||
Idle current |
< 10mA |
< 50mA |
|||||
Temperature Compensation |
- 3mV to -5 mV /ºC/cell |
||||||
Over Load Features |
125 % for 1 minute |
||||||
Operation Mode |
PCU must be designed to work in |
||||||
Indications |
Inverter Overload Grid Chg. Inverter On |
||||||
Protections |
Input over/under voltage Short Circuit Load surge current |
||||||
Cooling |
DC Fan ‘ON’ at > 25% load |
||||||
Display |
Display through LED |
Display on LCD (rolling) |
|||||
Inverter ON Mains ON |
RITIKA Initializing, Solar PCU Off/On, Mains On, High Battery Voltage, PV Voltage, PV Chg. Current, Main Chg. Current, Load Current or % Load, O/P Ac Voltage, Over Load, Short Circuit, Low Battery, No Load Shutdown |
||||||
On-line data logging |
Optional |
||||||
Ingress Protection |
IP – 20 |
||||||
Dimension (mm) |
300 × 210 × 270 |
380 × 230 × 390 |
|||||
Weight (Kg.) |
8.920 |
11.580 |
18.660 |
22.220 |