Rishikesh Electromatic Pvt. Ltd.

Borivali East, Mumbai, Maharashtra

RISHIKESHdirect reading Specific Gravity Balance provides a simple and quick mean to read directly the specific gravity of rubber and other elastomers. Thus reducing labour and eliminating calculations. The time taken to find out specific gravity of a sample is only about half a minute. The balance consists of a rigid scale with specific gravity (SG) printed on standing vertically on a heavy base plate. To the center point at the scale, through jewel bearings to minimize the friction, a balancing arm is pivoted. At one end of the arm two stainless steel pins are hanging with yarns. One of the pin is attached with glass jar kept on the base. A guard is provided to avoid accidental falling of the jar during use. At the other and of the balancing arm a pointer is fixed which indicates the specific gravity of materials under test. A sliding weight is also provided for initial balancing of the sample of different weight a leveling of the base plate.

Two models of balance, one with range of specific gravity between 0.9 to 3.0'' the second with range of specific gravity / between 0.2to2.0 are available. A sample of any shape weighing between 5 and 12g can be tested in the first modal, that weighing between 3 and 5g can be tested in the second model, and that weighing between 1and 2g can be tested in the third made. In case of second and third model, the lower pin is quite heavy and also acts as sinker. Also in these models the glass jar is kept on the base of a frame, which can be slide up and down on a rod fixed to the base plate to cover the full range at specific gravity.

Din Abrasion Testing MachineAbrasion Tester electrically operated with single phase motor, reduction gearbox. The machine is used to determining abrasion resistance of a cylindrical rubber specimen against abrasive cloth mounted on a cylindrical drum. The machine is made according to German Standard DIN 53516.

Taber Type Abrasion Tester
Repeatable precision in abrasion testing

Invented by Taber in the early 1930's, the Taber abrasion is an industry standard used in the wear and durability testing of ceramics, plastic, textiles, metals, leather, rubber, flooring, and painted, acquired and electro-plated surface, such testing aids in
1) Research & Development
2) Process Control
3) Quality Assurance.

Suitable for accelerated salt spray corrosion test of protective coating of metallic material, automotive parts and components, electric parts and components, industrial products, etc. Can be used for all kinds of salt spray corrosion tests according to the standards of GB10587-89, GB2423.17-93 "The Basic Environmental Test Regulations of Electric & Electronic Products: Salt Spray Test Method" GB/T10125-1997 as well as equivalent IEC, DIN, MIL and ASTM.

RISHIKESHmanufacturing various types of specimen cutting dies as per International standards, ASTM, ISO, DIN, JIS, IS etc. These dies are made with hardened tool steel and vary high accuracy in its dimensions. All dies are guaranteed for its quality and accuracy.

RISHIKESHmanufacturing various types of thickness gauge to check the thickness of Rubber, Paper, Fabric, Card Board, Films etc. as per IS 3400 ( Part I ) 1977 in various range, throat and accuracy.

Most suitable for checking the thickness of Rubber sheet, Fabrics, Leather, Rexine, Paper, Thin Films and all other flexible materils. It provides a maximum compressive load on the specimen to get exact reading as per IS specification. Hand held thickness gauges are also available in different range and throats.

RISHIKESHmanufacturing various types of Specimen Cutting Presses for accurate and easy sample preparation of different profiles with standard cutting dies.

PneumaticA Pneumatic Specimen Press(cutter) for cutting flat and soft paper, rubber, plastic materials into samples or standard shape specimen. Testing Machine of Pneumatic Specimen Press is able to coordinate with various cutters to cut them into samples or into standard shape specimen.

HydraulicHydraulic type specimen cutting press is suitable for Quick and accurate cutting of specimen. It can accommodate various types for cutting die and the pressure can be released quickly to remove the specimen.

Compression Set Apparatus for testing under constant strain plate's type with base plate and hand wheel arrangement consists of 4 steel plates with flat and parallel ground faces. The plates are moving in a fixture having a rigid base plates guided on a pair of rods. The spacers are also guided on the same rods with springs in between to increase the space between the plates for inserting the specimen.

RISHIKESHDigital Spring Testing Machine is designed to test the compression load vs. length and tension load vs. length in kgf. The extension and compression length is monitored in the digital display in mm by 0.01mm and the force is displayed in kgf the machine can also use for tensile and elongation of various materials and other force related test can also done with specified fixtures.

Display unit: The display unit shows the force in kg and linear measurement in millimeters by 0.01mm

Technical Details
1.Test capability: Load Cell
2.Maximum Load 50kgf
3.Maximum Extension : 300mm
4.Test feature : Compression and Extension.
6.Motor : HP DC
7.Drive : DC variable controller
8.Power : 220 - 230V AC