rishbh tapes

Dadra, Dadra & Nagar Haveli

A 1.5 Mil (38 micron) dead soft malleable aluminum foil coated with an aggressive, high temperature acrylic adhesive system. This type of foil tape conforms well to both fibrous and sheet metal ducts, providing an excellent vapor seal; also conforms well to irregular surfaces. ElectroTape Specialities Aluminum Foil Tape is coated with a special cold weather acrylic pressure sensitive adhesive system that combines superior quick stick at normal temperatures with superior low temperature performance at freezing. Recommended for use at normal and elevated temperatures also.

A double-faced tape based on cotton fabrics with very high tack adhesive. An interlinear is laminated to one face of the tape to help application of the tape. Being a cloth very flexible the applications of this tape is very high.

Useful in mounting of Stereo in Flexo graphic Printing, Textile Printing, Carpet Fixing, Holding of Plastic Articles, etc.

Our PVCFLD Foam Tape series is domestic low density single-coated vinyl foam, 6-10 pound per cubic foot depending on thickness, and available from 1/16 to 1 thick. Common Foam Tape thicknesses are listed below at standard lengths but other combinations of thickness and length can be quoted on request.

Please note that medium density (PVCFMD series at 9-13 lb/cu.ft.), high density (PVCHD series at 13-17 lb/cu.ft.), and very high density (PVCVHD series at 17-21 lb/cu.ft.) can be quoted, too. Call with inquiries about specialty variants of this type of foam tape, such as mylar-backed, soft, window glazing, double-coated, and UL approved.

PVCFLD series has water-borne acrylic adhesive one side for a variety of gasketing functions, including seaming, sealing, spacing, squeak and rattle abatement, dust and light barrier, dissimilar metals separation, etc. Compare with products from St. Gobain, Foamseal, and Gaska Tape. Structural Engineering Tape.

the barrier i.e. tissue paper. It is much more useful in bonding two surfaces on semi permanent basis or in some cases for permanent basis.

Bonds most material like metal, plastic, Cloth, Expanded Foam etc. Ideal for bonding decorative items on various smooth surfaces & bonding of household electrical appliances, Polybags permanent bag closures, mounting of novelties, Membrane keyboard, joining foams, trims in automobiles, metal labels, splicing of paper and synthetic films.

Interior paint masking, silk screening, Light duty packaging, bundling, holding, splicing & Tabbing, painting autos, boats, and Electrical industry.

1. The data above are typical results and subject to change without notice.2. Tolerance: Weight and Thickness: 10%; Width: 3mm; Length: Cut Roll & Log Roll 0.3m, Jumbo Roll 0.5%.3. The products should be stored at room temperature and be kept away wet and/or heat source.4. It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.5. The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.