• FeaturesVinylester Chemical Capsule, ETA 11-0155 Option 7 Certification etc.

Chemical Fixing Vinylester - Rotary percussion capsule pot-7.Bonded anchor in capsules for anchorage of threaded rod. High Loads & safe Chemical Anchoring, Reliable fixing in un-cracked concrete, Compatibility to Parent Concrete, No wasteage or no excess quantity, Low odour, High Chemical resistance, Reduced edge and spacing distances.

Chemical or resin anchors are generic terms relating to steel studs, bolts and anchorages which are bonded into a substrate, usually masonry and concrete, using a resin based adhesive system. Ideally suited for high load applications, in virtually all cases the resulting bond is stronger than the base material itself and as the system is based on chemical adhesion, no load stress is imparted to the base material as with expansion type anchors and are therefore ideal for close to edge fixing, reduced centre and group anchoring and use in concrete of unknown quality or low compressive strength. Although there are many differing variations and delivery systems in the market, all systems operate using the same basic principle with the base resin, requiring the introduction, by mixing, of a second component to begin the chemical curing process, hence the term chemical anchor.

• SIZE32 mm and 41 mm

Powerful 1900 watt motor Supplied with dust extraction connector, 32 mm and 41 mm spanners Optimum speed range to drive small and large core bits Soft start with stepless speed control LED thermal motor temperature protection indicator Safety clutch Quick-in connection - secure motor fixing connection for ease of use and minimum vibration L shaped handle for better weight distribution 3-speed gearbox 5 m cable with PRCD.

• FeatureHeavy Duty Anchor bolt for through fixings, Hardened and Tempered Steel Body 5.8 Grade & 8.8grade etc.

FM-744 Heavy Duty through Anchor for Cracked Concrete, it has high resistance when anti-corrosions coating with glossy finish 1000 hours in salt spray test & high stability. It was high threaded anchor assembled nut & washer. The anchor is manufactured with a zinc plated carbon steel body and stainless steel expansion clip for premium performance.

• FeatureSecure Fastenings in various base materials, Cone attached to sleeve to ensure pre-setting etc.

TDS anchor is a medium duty metal anchor which is used in conjunction to variuos accessories because of the internal metric threads.The two projections on the outer shell prevent the rotation of the anchor inside the hole by providing firm grip. The thick walls of the expanders give the anchor its exceptional grip and allow it to cater for oversized holes caused by powerful drills in weaker materials such as brick work.

Mechanical Expansion Anchors ancient times to secure building components. Originally, a plug of wood or lead plug was carved to size and driven into a hole in the base material. As a screw or nail was driven into the plug, it expanded in the hole. Commercially manufactured anchors were first made from lead or fibre material in a variety of sizes to match a bolt or screw.

• FeaturesVinylester Chemical Capsule, ETA 11-0155 Option 7 Certification etc.

Chemical Fixing Vinylester - Rotary percussion capsule pot-7.Bonded anchor in capsules for anchorage of threaded rod. High Loads & safe Chemical Anchoring, Reliable fixing in un-cracked concrete, Compatibility to Parent Concrete, No wasteage or no excess quantity, Low odour, High Chemical resistance, Reduced edge and spacing distances.

Chemical or resin anchors are generic terms relating to steel studs, bolts and anchorages which are bonded into a substrate, usually masonry and concrete, using a resin based adhesive system. Ideally suited for high load applications, in virtually all cases the resulting bond is stronger than the base material itself and as the system is based on chemical adhesion, no load stress is imparted to the base material as with expansion type anchors and are therefore ideal for close to edge fixing, reduced centre and group anchoring and use in concrete of unknown quality or low compressive strength. Although there are many differing variations and delivery systems in the market, all systems operate using the same basic principle with the base resin, requiring the introduction, by mixing, of a second component to begin the chemical curing process, hence the term chemical anchor.

• SIZE32 mm and 41 mm

Powerful 1900 watt motor Supplied with dust extraction connector, 32 mm and 41 mm spanners Optimum speed range to drive small and large core bits Soft start with stepless speed control LED thermal motor temperature protection indicator Safety clutch Quick-in connection - secure motor fixing connection for ease of use and minimum vibration L shaped handle for better weight distribution 3-speed gearbox 5 m cable with PRCD.

• FeatureHeavy Duty Anchor bolt for through fixings, Hardened and Tempered Steel Body 5.8 Grade & 8.8grade etc.

FM-744 Heavy Duty through Anchor for Cracked Concrete, it has high resistance when anti-corrosions coating with glossy finish 1000 hours in salt spray test & high stability. It was high threaded anchor assembled nut & washer. The anchor is manufactured with a zinc plated carbon steel body and stainless steel expansion clip for premium performance.

• FeatureSecure Fastenings in various base materials, Cone attached to sleeve to ensure pre-setting etc.

TDS anchor is a medium duty metal anchor which is used in conjunction to variuos accessories because of the internal metric threads.The two projections on the outer shell prevent the rotation of the anchor inside the hole by providing firm grip. The thick walls of the expanders give the anchor its exceptional grip and allow it to cater for oversized holes caused by powerful drills in weaker materials such as brick work.

Mechanical Expansion Anchors ancient times to secure building components. Originally, a plug of wood or lead plug was carved to size and driven into a hole in the base material. As a screw or nail was driven into the plug, it expanded in the hole. Commercially manufactured anchors were first made from lead or fibre material in a variety of sizes to match a bolt or screw.