RIDDHI FULLY AUTOMATIC STICKER LABELING MACHINE

Description: The Automatic Vertical Sticker Labeling Machine is one of the most user friendly. The machine is used for full/partial wrap around labeling on different size of round container. It is capable of labeling up to 80 containers per minutes depending on products and label size. The automatic model is equipped with roller spacing device resulting in a simple operation.

Operation: The round containers positioned & accurate spacing between two containers by the roller spacing device for wrap-around operation at the operation at the labeling point, an electronic product sensor senses container & release a label from self adhesive label roll. If machine is equipped with batch printing device in that case batch printing device prints the batch no. & other matter on label during label is stationary means time between sensing of two label. The sensed round container moves on conveyor sticker label at labeling point wrapped around to container. Then the labeled container moves further through a rubber pressing belt & stationary rubber pad that ensures neat & perfect fixing of label.PLC programmed with 4 MMI display.

Electrical: Conveyor Motor:-

0.5 HP Three phase motor/ 415 Volts / 50 Hz.

Pressing Device Motor:-

0.25 HP Single phase motor/ 220 Volts / 50 Hz.

Sticker roll Servo motor:-

Machine Dimension: 1835mm (L) x 600mm (W) x 1450 mm (H)

Height of Conveyor: 800 mm to 880 mm adjustable.

Net Weight: 350 Kg.

Gross Weight: 600 Kg.

Quantity: 01 Nos

Salient Features: High Production Speeds.

Stainless steel 304 construction.

Accurate label placement.

Full Security Package including counter.

No change parts requirements.

Very less down time for change over.

Suitable for Glass, Plastic, Pet, Tin, containers.

Utility Requirement: Electrical Supply:- Three Phase+Neutral+Earthing

Electrical Load:- 1 KW

• All contact parts are made out of SS. 304 (SS.316 on demand at extra charges). No casting are used for avoiding contamination problems.
• Coupling provided between motor shaft & rotor shaft for ease in maintenance.
• Three oil seals between the Motor & the processing chamber to prevent liquid going in the motor winding, Resulting in the burning of the motor.
• Modified design of semi concave teeth in rotor & stator reduces the motor HP & gives better performance in size reduction without damaging the product.
• Extended bearing housing specially designed to facilitate fine adjustment of bearing clearances or back lash to avoid metal to metal contact of rotor & stator. This unique design provides smooth & consistence all round performance & ong life of rotor & stator.
• Leak proof neoprene sealing device.
• Three way cock system for draining & recirculation of liquids provided as standard. Extra discharge spout provided as standard for viscous products.
• DOL Starter with over load relay for protection against single phasing & low voltage.
• Contact parts can be easily dismantled for cleaning.
• Special design facilitates adjustments of the grinding gap by an exterior screw by means of handle even during operation.
• Flame proof motor &Flame proof rotary switch can be provided on request at extra cost.
•  Output Depending upon material characteristics viscosity, density & micron size.

automatic volumetric liquid bottle filling machine

description

automatic volumetric liquid bottle filling machine work on volumetric principle with diving nozzles. The unit is made compact, versatile & enclosed in stainless steel elegantly matt finished body, consist of s.s. Salt conveyor, reciprocating nozzle with self centering devices & s.s. Syringe. No container no filling system arrangement is standard features of the machine. the main drive of the machine and conveyordrives consist of a/c motor with a/c frequency drive.

operation

containers moving on s.s. Slat conveyor, feed below the filling nozzles through a twin pusher system. The twin pusher system and reciprocating nozzles are precisely matched for centering of container below nozzles, to avoid spillage of liquid on container, to minimize foaming adjustable nozzles will reciprocate according to filling doze, nozzle will go upwards slowly from bottom level of bottle towards neck during filling. The dosing block with a hexagonal bolt fitted below syringes. This means different fill size can be easily set.

salient features

• + 1% filling accuracy on single dose.
• no bottleno filling system
• rigid vibration free construction for trouble free performance.
• s.s. Elegantly matt finished body.
• elegant and easy control panel for total control on operation.
• minimum change overtime, from one size to another container or fill size.
• self lubrication uhmw-pe guide profile for ss slat chain provides low friction wear surface, smooth

and noiseless conveying.

• error code display on ac frequency drive on control panel.
• drain tray around machine platform.
• drip tray under the conveyor.
• pneumatic bottles stopping arrangement.
• syncronized two nos. A/c drive for main motor & conveyors belt.
• safety guard for conveyor gear box, motor, and pneumatic cylinders.
• mcb for over load protection, and prevention against short circuit.
• inbuiltprotection against over current, voltage fluctuation, short circuit in ac frequency drive.

optional feature

• automatic chain washing system for conveyor belt.
• in-built pre-inspection.
• acrylic cabinate.
• acrylic cover on conveyor.
• nitrogen flushing.
• float tank ( holding tank) with or without stirrer.

utility requirment

electrical supply : 3 phase+neutral+earthing

electrical load : 2 kw

air pressure : minimum : 6 bar pressure 0.5 cfm

RIDDHI SEMI-AUTOMATIC ROPP or SCREW CAP SEALING MACHINE

Description: The semi automatic cap sealing machine is precision built on sturdy welded steel frame completely enclose in stainless steel sheet and doors are provided to facilitate the servicing of machine. Machine is motorized incorporating rotating threading & sealing rollers, for threading & sealing of ROPP cap.

Operation: Require manually feeding & unloading container, where the body and the neck of the container are positioned below the rotating head, and sealing head is performing perfect operation of threading & sealing.

Electrical: Main Machine:-

1 HP Three face motor/ 415 Volts / 50 Hz.

Machine Dimension: 1000mm(L) x 720mm(W) x 1400 mm (H) approx

Net Weight: 200 Kg.

Gross Weight: 350 Kg.

Quantity: 01 Nos.

Salient Features: The unit is made compact & versatile.

S.S. Elegantly Matt Finished Body.

Built in front control panel.

Quick setting.

Motoriesed head movement.

No change parts require for different container diameter.

Low noise level, low power consumptions.

Adjustable bottle height gauge for easy and quick setting.

SS cladding or hard chrome plating of all exposed parts to ensure long life and resistance against corrosion.

Sealing pressure can be varied to suit different gauges and size of caps.

ALIENT FEATURES

• All contact parts of the mixing bowl and beater are made out of S.S. 304 material or S.S. 316, as per requirements. Scrapping blades can also be provided if required
• The Mixing bowl can be jacketed for electric/steam heating is ideal equipment for small batch sizes
• Manual lifting arrangment for agitators up to 50 Lts and motorize lifting
• The top of mixing bowl has an S.S. Lid with a charging  hole
• The mixing bowl is provided with castor wheels and locking system for easy handling and  transportation
• Flame Proof motor van be supplied as optional

APPLICATION

• Powder to powder mixing
• Manufacturing of starch paste with steam or electrically heated jacketed with or without a flush bottom valve for discharge
• Dry powder to wet phase mixing for wet granulation

We manufacture Hand Operated tube crimping machine or closing machine. Which is suitable for closing of 3 grams to 25o grams tube.

Batch coding is also available in option.

DESCRIPTION

Automatic Measuring / Dosing Cup Placement & Pressing machine is highly efficient machine with elegant look, consists of conveyor, vibrator, and feed worm, container holding star plate, & pressing plate, & pressing plate. All the exposed parts of the unit are in SS chrome platted or cladded with S.S. The machine is precision built on sturdy welded steel frame completely enclose in stainless steel sheet and doors are provided to facilitate the servicing of the machine.

OPERATION

The feed container moving on conveyor blet are feed into an In-feed star wheel through In-feed worm, star wheel bringing the sealed container below the pressing plate, mean while the sealed bottle pickup a cup from the delivery chute of bowl, where the body and the neck of the container are positioned below the pressing plate, where the pressing plate press cup gradually & performing perfect operation of cup pressing.

SALIENT FEATURES

• No container no cup arrangement.
• SS elegantly matt finished body
• Single motor synchronizes conveyor, star wheel, & platform turret.
• Adjustable height of conveyor belt, to align with other machine of the line.
• Specially designed hopper is provided to increase storage capacity of bowl.
• Low noise level, low power consumptions.
• Self lubrication UHMW PE guide profile for low friction wear surface, smooth and noiseless

Conveying.

• SS cladding or hard chrome plating of all exposed parts to ensure long life and resistance against

corrosion

• A/C drive to synchronize, conveyor, Star wheel and platform turret & capping bowl.
• Universal coupling for quick and easy setting of in-feed worm.

OPTIONAL ACCESSORIES

• No cup no container arrangement.
• Motorized Height Adjustments.
• Acrylic cabinate.
• Safety Guard for Operation and protection.

UTILITY REQUIRMENT

• Electrical Supply: 1 Phase+Neutral+Earthing
• Electrical load:0.75 KW

• Easy operation
• Easy loading and unloading
• Output : 100 bottles per minute
• Manual loading & unloading
• Machine with Geneva cam mechanism

SALIENT FEATURES

• Geneva mechanism.
• Three inner, one outer and one air wash
• Sequence of washes to customer s choice .
• Out put : 64 to 100 bottles per minute.
• Easy operation.
• Stationary nozzles eliminate contamination of water cycles.
• Individual solenoid valve for each washing sequence , which eliminates carbon plate and other accessories reduce leakage and maintenance to minimum. Higher capacity centrifugal pumps to wash bigger bottles (500&1000 ml.)
• The stationary nozzles avoid chipping of bottle necks .
• Pumps and tanks are mounted on portable stand for easy maintenance .
• Bottle guide system specially for light weight bottle.
• Separate panel control to avid any short circuit due to spraying of water.

AUTOMATIC ROPP or SCREW CAP SEALING MACHINE

Automatic Ropp cap sealing machine is versatile, self supported on stainless steel leg with height adjustable adjustment system. The machine is precision built on sturdy welded steel frame completely enclose in stainless steel sheet and doors are providing to facilitate the servicing of machine.

OPERATION

The feed container moving on conveyor belt are feed into an in feed star wheel, bringing the container below the sealing head in the subsequent indexing part, mean while the bottle pickup a cap from the delivery chute of cap feeling bowl, where the body and the neck of the container are positioned below the rotating head, where the sealing head is performing perfect operation of threading & sealing.

Specially designed hopper is provided for more storage capacity, deliver cap to delivery chute with correct position that ensures the perfect position of the cap at the end of delivery chute.

The capping head rotate along with the main turrent and perform the capping operation.

Output per Hour as per your requirement

1)3600 to 6000bottles.

2)3600 to 9000bottles.

3)4000 to 12000bottles.

SALIENT FEATURES

• No container no cap arrangement
• Single motor synchronises conveyor, star wheel & platform turret.
• Adjustable height of conveyor belt.
• All contact parts are made out of stainless steel.
• Sealing pressure can be varied to suit different gauges and size of caps.
• Specially designed hopper is provided to increase storage capacity of bowl.
• Low noise level, low power consumptions. No cap No container arrangement (optional)
• Self lubrication UHMW-PE guide profile for SS slat chain provides low friction wear surface, smooth
• Andnoiseless conveying.
• Drain tray around machine platform.
• SS cladding or hard chrome palting of all exposed parts to ensure long life and resistance against cprrosion.
• SyncronizedA/c drive to synchronize, conveyor, star wheel and platform turret & capping bowl.
• Universal coupling for quick and easy setting of In-feed worm.
• Adjustable bottle height gauge for easy and quick setting

OPTIONAL FEATURE

• No cap no container arrangement.
• Motorized height adjustments system.
• Acrylic cabinate.

UTILITY REQUIRMENT

Electrical Supply : 3 Phase+Neutral+Earthing

Electrical load : 1.5 KW

DESCRIPTION :

We present Water Circulation Cooling Plate ( Canddy & Toffee Plant) which is very much useful for cooling and mixing of Lollypop/Candy and Toffee batch. The cooling time of our product is less than the ordinary plates it provides a continuous circulation of water inside the plate. These products automatically change their side when one side becomes hot. They are available in the capacities of 50 Kg / 100 kg / 200 Kg and also in the dimensions of 1524 mm X 914 mm. The overall size of our range is 1828 X 914 X 914mm and the Net weight is 500 Kg. Our products are available at affordable prices in the market for our customers.

CANDY & TOFFEE THREE STAGE ROPE SIZER

DESCRIPTION

We also offer our clients with a qualitative range of Three Stage Rope Sizer. These are used for producing candy in ropes wherein the toffee or candy is processed into the right size/ width of rope. It can produce 2500 Kg of candy / shift depending on size, shape and weight of candy. Three Stage Rope Sizer technology is very convenient to operate and easy to maintain as the availability of ample experienced man power.

SPECIFICATION.:-

3-stage rope sizer

Length - 900 mm

Width - 700 mm

Height - 1575 mm

Weight - Approx. 400 K.G.

Power - 1 H.P. DC/1440R.P.M.

The toffee / candy thin rope from Batch Roller Machine is further proceed into rope sizer machine to form exact size of rope as per toffee / candy.

Riddhi high speed vial washing machine with Grippers for washing of vials Having dimensions comprised in the specification. The in-line tunnel design is such that separation is maintained between feeding zone and discharge zone of the cleaned containers. All the mechanical drives are separated and isolated from the washing zone. A Top class materials only are used for manufacturing, with careful choice of components, thereby taking in to consideration of all aspects of sanitation and complying with the pharmaceuticals cGMP requirements.Salient Features

• The machine is suitable for washing of 2 ml to 100 ml vials.
• High Pressure spray nozzles enter in to the vials & ensure perfect wash
• Totally fabricated from S.S. Materials Including the basic frame.
• The entire washing process can be seen.
• No Change of Parts required for washing of vials - saving time of Change over
• All Parts coming in contact with washing zones / jets are made from S.S.316 material
• Water re-cycling arrangement is possible as per customers requirements
• Machine is totally sturdy and withstand continuous operation for long working hours without any
• trouble.
• Machine is with PLC system & Printing facility with passwords.

• The machine built on principle of slant travel of ampoules while filling & sealing.
• To Take care of vide variation of ampoule neck dimensions, thickness and ovality of available Indian ampoules.
• The unit on SS square pipe frame and totally encompassed with SS coverings.
• In pleasing matt finished further. The large opening available at the bottom side for easy of absolute cleaning
• The pendant type electrical control panel is lifted frp, machine for ease of operation and safety.

CAPSULE LOADER MACHINE

The automatic Capsule Loader Machine is compact, occupies minimum space is readily movable and is simple to operate. It gives higher production at lower cost and with much better standards of accuracy.

The outside body and hopper is fabricated and made out of S.S. 304 quality. The machine is manufactured to suit 00/0/1/2/3 or 4/5 capsule size combination.

From Size 00/0/1/2 you can do one machine with change parts, for size 3, 4 you will have to do one other machine, for size 5 one machine, for size 000 a separate machine.

Output: 2 to 2.5 Lakh capsule per shift

Drive: HP, 3 phase motor, 1400 RPM

Dimension: 630 x 430 x 780 mm

Weight: 75 Kg.

We manufacture Rotary Tablet Press Turret for all types of Rotary Machines of Cadmach, Chamunda, Karnavati and other Manufacturers.

Please advise us on the following while sending the enquiry

1. Model of the Machine

2. Make of the machine

3. how many station

4. what is the tooling

5. Standard or GMP Model

DRUM BLENDER

We are one of the pioneer Pharmaceutical Machinery Manufacturers from India, We manufacture Drum Blender, the blending achieved in Drum Blender is very good and it is one of most popular and conventional Blender used in the Pharma Industry.

TECHNICAL OFFER

Octagonal Blenders, due to its octagonal shape is designed to process to larger volume of material. it occupies less space compared to other similar blenders like V and Double Cone. Power consumption is also less, The blending takes place at low speed during operation. It is well balanced even in higher capacities.

APPLICATION

• Dry powder mixing for tablets and capsules formulations.
• Dry granules sub lots mixing to increase the batch size at bulk lubrication stage of tablet Granules

SALIENT FEATURES:

• Contact parts in stainless steel 304 or 316
• Octagonal shaped with rectangular center, conical discharge frustum and rectangular top frustum
• Baffles provided in the shell
• Manhole with gasket is provided to fix baffles and for ease of cleaning the shell
• Charging and discharging is through a butterfly valve. A conical adaptor can be provided for fixing charging drum after butterfly valve
• Unit can be provided with bin charging arrangement
• All moving parts are enclosed in guards
• A safety railing with a limit switch is provided for operator safety
• Manual Inching arrangement can be provided
• Flame - proof motors with flame - proof push button stations can be provided.

VOLUMETRIC BOTTLE FILLING MACHINE(DOUBLE HEAD)

Description: Semi Automatic Volumetric Liquid Filling Machine is precision built on sturdy welded frame completely enclose in stainless steel sheet and doors are provided to facilitate the servicing of machine. Working on volumetric principle. The unit is made compact, versatile and enclosed in stainless steel elegantly matt finish body

Operation: Containers have to place manually below the filling nozzle at platform of machine. Where motor operated syringe fill desire pre set volume in container, bottle guide are provide for precisely match for centering of container below nozzle, to avoid spillage of liquid on container. The dosing block with a hexagonal bolt fitted below syringe. This means fill size can be easily set.

Electrical: Main Machine:-

1 HP Three Phase motor /415 Volts / 50 Hz.

Filling Range: 100 ML -1000 ML

Net Weight: 120 Kg.

Gross Weight: 275 Kg.

Machine Dimension:650mm (L) x 900 mm (W) x 950mm (H)

Salient Features: Semi-Automatic with filling range.

1% Filling accuracy on single dose.

Three different speeds depending upon capacity of bottles.

Body covered with SS304 sheet. All contact parts SS 316

A unit to fill variety of liquid and can be used for various type of containers.

Minimum change over time from one size to another container or fill size.

TECHNICAL OFFER

RIDDHI MANUAL VIAL BOTTLE INSPECTION BELT WITH BLACK & WHITE BOARD OUTPUT : : Six Feet Length Eight Feet Length Output : 60 to 120 Container/min. (Approx), 80 to 250 Container/min. (Approx) No. of Operator : Four (2 x 2, two side seated), Six (3 x 2, two side seated) Power Supply : 440Volts, 3 Phase, 50Hz., 440 Volts, 3 Phase, 50 Hz. Overall Dimension : 1830mm (L)x760mm (W)x1325mm(H), 2440mm (L)x760mm (W)x1325mm(H) Net Weight : 200kgs, Net Weight : 225 kgsOPTIONAL ACCESSORIES:
Speed variable A.C. frequency drive
OPERATION : :

SS 304 Tubler structure
PVC black & white board as per Gmp Norms
UHMW self lubrication guide below chain
SS elegantly matt finishing
Adjustable height matt finishing
Rigid vibration free construction for trouble free performance

We Manufacture Semi Automatic Alluminium Tube Filling Machine with first fold and second fold and for adhesives M fold is also given , the operator places the tube by hand to the rotary turret , tube is filled , and it goes to first fold, then second fold after that to batch coding station and then to the ejection station only tube is loaded manually all other aspects are taken care by the machine. With tube filling machine you can fill cosmetics, ointments, creams, tooth paste or Petrolium Jelly.

Automatic Liquid Vial Filling & Stoppering Machinefunctions on volumetric principle with diving nozzles. Manufactured using pleasing matte finished stainless steel, the machine is compact and versatile in design. The basic unit is comprised of turntable, unique co. Eccentric pre-gassing, SS316 stat conveyor belt, filling and post-gassing SS316 nozzles extremely efficient and precision built SS316 syringes, non- toxic synthetic rubber tubing's, simple reach compressed panel and with no stopper, no container, no filling System.

Features

• No Vial No Filling System.
• S.S. Elegantly matt finished body.
• Inbuilt scrambler and Unscrambler.
• No Rubber Stopper machines stop system.
• Immediately stopper closing on vial after feeling.

We Manufacture Multi Mill Sieves as per customer requirement. The Sieves are made of SS 316 or SS 304 as per requirement of the customer.

RIDDHI FULLY AUTOMATIC STICKER LABELING MACHINE

Description: The Automatic Vertical Sticker Labeling Machine is one of the most user friendly. The machine is used for full/partial wrap around labeling on different size of round container. It is capable of labeling up to 80 containers per minutes depending on products and label size. The automatic model is equipped with roller spacing device resulting in a simple operation.

Operation: The round containers positioned & accurate spacing between two containers by the roller spacing device for wrap-around operation at the operation at the labeling point, an electronic product sensor senses container & release a label from self adhesive label roll. If machine is equipped with batch printing device in that case batch printing device prints the batch no. & other matter on label during label is stationary means time between sensing of two label. The sensed round container moves on conveyor sticker label at labeling point wrapped around to container. Then the labeled container moves further through a rubber pressing belt & stationary rubber pad that ensures neat & perfect fixing of label.PLC programmed with 4 MMI display.

Electrical: Conveyor Motor:-

0.5 HP Three phase motor/ 415 Volts / 50 Hz.

Pressing Device Motor:-

0.25 HP Single phase motor/ 220 Volts / 50 Hz.

Sticker roll Servo motor:-

Machine Dimension: 1835mm (L) x 600mm (W) x 1450 mm (H)

Height of Conveyor: 800 mm to 880 mm adjustable.

Net Weight: 350 Kg.

Gross Weight: 600 Kg.

Quantity: 01 Nos

Salient Features: High Production Speeds.

Stainless steel 304 construction.

Accurate label placement.

Full Security Package including counter.

No change parts requirements.

Very less down time for change over.

Suitable for Glass, Plastic, Pet, Tin, containers.

Utility Requirement: Electrical Supply:- Three Phase+Neutral+Earthing

Electrical Load:- 1 KW

• All contact parts are made out of SS. 304 (SS.316 on demand at extra charges). No casting are used for avoiding contamination problems.
• Coupling provided between motor shaft & rotor shaft for ease in maintenance.
• Three oil seals between the Motor & the processing chamber to prevent liquid going in the motor winding, Resulting in the burning of the motor.
• Modified design of semi concave teeth in rotor & stator reduces the motor HP & gives better performance in size reduction without damaging the product.
• Extended bearing housing specially designed to facilitate fine adjustment of bearing clearances or back lash to avoid metal to metal contact of rotor & stator. This unique design provides smooth & consistence all round performance & ong life of rotor & stator.
• Leak proof neoprene sealing device.
• Three way cock system for draining & recirculation of liquids provided as standard. Extra discharge spout provided as standard for viscous products.
• DOL Starter with over load relay for protection against single phasing & low voltage.
• Contact parts can be easily dismantled for cleaning.
• Special design facilitates adjustments of the grinding gap by an exterior screw by means of handle even during operation.
• Flame proof motor &Flame proof rotary switch can be provided on request at extra cost.
•  Output Depending upon material characteristics viscosity, density & micron size.

automatic volumetric liquid bottle filling machine

description

automatic volumetric liquid bottle filling machine work on volumetric principle with diving nozzles. The unit is made compact, versatile & enclosed in stainless steel elegantly matt finished body, consist of s.s. Salt conveyor, reciprocating nozzle with self centering devices & s.s. Syringe. No container no filling system arrangement is standard features of the machine. the main drive of the machine and conveyordrives consist of a/c motor with a/c frequency drive.

operation

containers moving on s.s. Slat conveyor, feed below the filling nozzles through a twin pusher system. The twin pusher system and reciprocating nozzles are precisely matched for centering of container below nozzles, to avoid spillage of liquid on container, to minimize foaming adjustable nozzles will reciprocate according to filling doze, nozzle will go upwards slowly from bottom level of bottle towards neck during filling. The dosing block with a hexagonal bolt fitted below syringes. This means different fill size can be easily set.

salient features

• + 1% filling accuracy on single dose.
• no bottleno filling system
• rigid vibration free construction for trouble free performance.
• s.s. Elegantly matt finished body.
• elegant and easy control panel for total control on operation.
• minimum change overtime, from one size to another container or fill size.
• self lubrication uhmw-pe guide profile for ss slat chain provides low friction wear surface, smooth

and noiseless conveying.

• error code display on ac frequency drive on control panel.
• drain tray around machine platform.
• drip tray under the conveyor.
• pneumatic bottles stopping arrangement.
• syncronized two nos. A/c drive for main motor & conveyors belt.
• safety guard for conveyor gear box, motor, and pneumatic cylinders.
• mcb for over load protection, and prevention against short circuit.
• inbuiltprotection against over current, voltage fluctuation, short circuit in ac frequency drive.

optional feature

• automatic chain washing system for conveyor belt.
• in-built pre-inspection.
• acrylic cabinate.
• acrylic cover on conveyor.
• nitrogen flushing.
• float tank ( holding tank) with or without stirrer.

utility requirment

electrical supply : 3 phase+neutral+earthing

electrical load : 2 kw

air pressure : minimum : 6 bar pressure 0.5 cfm

RIDDHI SEMI-AUTOMATIC ROPP or SCREW CAP SEALING MACHINE

Description: The semi automatic cap sealing machine is precision built on sturdy welded steel frame completely enclose in stainless steel sheet and doors are provided to facilitate the servicing of machine. Machine is motorized incorporating rotating threading & sealing rollers, for threading & sealing of ROPP cap.

Operation: Require manually feeding & unloading container, where the body and the neck of the container are positioned below the rotating head, and sealing head is performing perfect operation of threading & sealing.

Electrical: Main Machine:-

1 HP Three face motor/ 415 Volts / 50 Hz.

Machine Dimension: 1000mm(L) x 720mm(W) x 1400 mm (H) approx

Net Weight: 200 Kg.

Gross Weight: 350 Kg.

Quantity: 01 Nos.

Salient Features: The unit is made compact & versatile.

S.S. Elegantly Matt Finished Body.

Built in front control panel.

Quick setting.

Motoriesed head movement.

No change parts require for different container diameter.

Low noise level, low power consumptions.

Adjustable bottle height gauge for easy and quick setting.

SS cladding or hard chrome plating of all exposed parts to ensure long life and resistance against corrosion.

Sealing pressure can be varied to suit different gauges and size of caps.

ALIENT FEATURES

• All contact parts of the mixing bowl and beater are made out of S.S. 304 material or S.S. 316, as per requirements. Scrapping blades can also be provided if required
• The Mixing bowl can be jacketed for electric/steam heating is ideal equipment for small batch sizes
• Manual lifting arrangment for agitators up to 50 Lts and motorize lifting
• The top of mixing bowl has an S.S. Lid with a charging  hole
• The mixing bowl is provided with castor wheels and locking system for easy handling and  transportation
• Flame Proof motor van be supplied as optional

APPLICATION

• Powder to powder mixing
• Manufacturing of starch paste with steam or electrically heated jacketed with or without a flush bottom valve for discharge
• Dry powder to wet phase mixing for wet granulation

We manufacture Hand Operated tube crimping machine or closing machine. Which is suitable for closing of 3 grams to 25o grams tube.

Batch coding is also available in option.

DESCRIPTION

Automatic Measuring / Dosing Cup Placement & Pressing machine is highly efficient machine with elegant look, consists of conveyor, vibrator, and feed worm, container holding star plate, & pressing plate, & pressing plate. All the exposed parts of the unit are in SS chrome platted or cladded with S.S. The machine is precision built on sturdy welded steel frame completely enclose in stainless steel sheet and doors are provided to facilitate the servicing of the machine.

OPERATION

The feed container moving on conveyor blet are feed into an In-feed star wheel through In-feed worm, star wheel bringing the sealed container below the pressing plate, mean while the sealed bottle pickup a cup from the delivery chute of bowl, where the body and the neck of the container are positioned below the pressing plate, where the pressing plate press cup gradually & performing perfect operation of cup pressing.

SALIENT FEATURES

• No container no cup arrangement.
• SS elegantly matt finished body
• Single motor synchronizes conveyor, star wheel, & platform turret.
• Adjustable height of conveyor belt, to align with other machine of the line.
• Specially designed hopper is provided to increase storage capacity of bowl.
• Low noise level, low power consumptions.
• Self lubrication UHMW PE guide profile for low friction wear surface, smooth and noiseless

Conveying.

• SS cladding or hard chrome plating of all exposed parts to ensure long life and resistance against

corrosion

• A/C drive to synchronize, conveyor, Star wheel and platform turret & capping bowl.
• Universal coupling for quick and easy setting of in-feed worm.

OPTIONAL ACCESSORIES

• No cup no container arrangement.
• Motorized Height Adjustments.
• Acrylic cabinate.
• Safety Guard for Operation and protection.

UTILITY REQUIRMENT

• Electrical Supply: 1 Phase+Neutral+Earthing
• Electrical load:0.75 KW

• Easy operation
• Easy loading and unloading
• Output : 100 bottles per minute
• Manual loading & unloading
• Machine with Geneva cam mechanism

SALIENT FEATURES

• Geneva mechanism.
• Three inner, one outer and one air wash
• Sequence of washes to customer s choice .
• Out put : 64 to 100 bottles per minute.
• Easy operation.
• Stationary nozzles eliminate contamination of water cycles.
• Individual solenoid valve for each washing sequence , which eliminates carbon plate and other accessories reduce leakage and maintenance to minimum. Higher capacity centrifugal pumps to wash bigger bottles (500&1000 ml.)
• The stationary nozzles avoid chipping of bottle necks .
• Pumps and tanks are mounted on portable stand for easy maintenance .
• Bottle guide system specially for light weight bottle.
• Separate panel control to avid any short circuit due to spraying of water.

AUTOMATIC ROPP or SCREW CAP SEALING MACHINE

Automatic Ropp cap sealing machine is versatile, self supported on stainless steel leg with height adjustable adjustment system. The machine is precision built on sturdy welded steel frame completely enclose in stainless steel sheet and doors are providing to facilitate the servicing of machine.

OPERATION

The feed container moving on conveyor belt are feed into an in feed star wheel, bringing the container below the sealing head in the subsequent indexing part, mean while the bottle pickup a cap from the delivery chute of cap feeling bowl, where the body and the neck of the container are positioned below the rotating head, where the sealing head is performing perfect operation of threading & sealing.

Specially designed hopper is provided for more storage capacity, deliver cap to delivery chute with correct position that ensures the perfect position of the cap at the end of delivery chute.

The capping head rotate along with the main turrent and perform the capping operation.

Output per Hour as per your requirement

1)3600 to 6000bottles.

2)3600 to 9000bottles.

3)4000 to 12000bottles.

SALIENT FEATURES

• No container no cap arrangement
• Single motor synchronises conveyor, star wheel & platform turret.
• Adjustable height of conveyor belt.
• All contact parts are made out of stainless steel.
• Sealing pressure can be varied to suit different gauges and size of caps.
• Specially designed hopper is provided to increase storage capacity of bowl.
• Low noise level, low power consumptions. No cap No container arrangement (optional)
• Self lubrication UHMW-PE guide profile for SS slat chain provides low friction wear surface, smooth
• Andnoiseless conveying.
• Drain tray around machine platform.
• SS cladding or hard chrome palting of all exposed parts to ensure long life and resistance against cprrosion.
• SyncronizedA/c drive to synchronize, conveyor, star wheel and platform turret & capping bowl.
• Universal coupling for quick and easy setting of In-feed worm.
• Adjustable bottle height gauge for easy and quick setting

OPTIONAL FEATURE

• No cap no container arrangement.
• Motorized height adjustments system.
• Acrylic cabinate.

UTILITY REQUIRMENT

Electrical Supply : 3 Phase+Neutral+Earthing

Electrical load : 1.5 KW

DESCRIPTION :

We present Water Circulation Cooling Plate ( Canddy & Toffee Plant) which is very much useful for cooling and mixing of Lollypop/Candy and Toffee batch. The cooling time of our product is less than the ordinary plates it provides a continuous circulation of water inside the plate. These products automatically change their side when one side becomes hot. They are available in the capacities of 50 Kg / 100 kg / 200 Kg and also in the dimensions of 1524 mm X 914 mm. The overall size of our range is 1828 X 914 X 914mm and the Net weight is 500 Kg. Our products are available at affordable prices in the market for our customers.

CANDY & TOFFEE THREE STAGE ROPE SIZER

DESCRIPTION

We also offer our clients with a qualitative range of Three Stage Rope Sizer. These are used for producing candy in ropes wherein the toffee or candy is processed into the right size/ width of rope. It can produce 2500 Kg of candy / shift depending on size, shape and weight of candy. Three Stage Rope Sizer technology is very convenient to operate and easy to maintain as the availability of ample experienced man power.

SPECIFICATION.:-

3-stage rope sizer

Length - 900 mm

Width - 700 mm

Height - 1575 mm

Weight - Approx. 400 K.G.

Power - 1 H.P. DC/1440R.P.M.

The toffee / candy thin rope from Batch Roller Machine is further proceed into rope sizer machine to form exact size of rope as per toffee / candy.

Riddhi high speed vial washing machine with Grippers for washing of vials Having dimensions comprised in the specification. The in-line tunnel design is such that separation is maintained between feeding zone and discharge zone of the cleaned containers. All the mechanical drives are separated and isolated from the washing zone. A Top class materials only are used for manufacturing, with careful choice of components, thereby taking in to consideration of all aspects of sanitation and complying with the pharmaceuticals cGMP requirements.Salient Features

• The machine is suitable for washing of 2 ml to 100 ml vials.
• High Pressure spray nozzles enter in to the vials & ensure perfect wash
• Totally fabricated from S.S. Materials Including the basic frame.
• The entire washing process can be seen.
• No Change of Parts required for washing of vials - saving time of Change over
• All Parts coming in contact with washing zones / jets are made from S.S.316 material
• Water re-cycling arrangement is possible as per customers requirements
• Machine is totally sturdy and withstand continuous operation for long working hours without any
• trouble.
• Machine is with PLC system & Printing facility with passwords.

• The machine built on principle of slant travel of ampoules while filling & sealing.
• To Take care of vide variation of ampoule neck dimensions, thickness and ovality of available Indian ampoules.
• The unit on SS square pipe frame and totally encompassed with SS coverings.
• In pleasing matt finished further. The large opening available at the bottom side for easy of absolute cleaning
• The pendant type electrical control panel is lifted frp, machine for ease of operation and safety.

CAPSULE LOADER MACHINE

The automatic Capsule Loader Machine is compact, occupies minimum space is readily movable and is simple to operate. It gives higher production at lower cost and with much better standards of accuracy.

The outside body and hopper is fabricated and made out of S.S. 304 quality. The machine is manufactured to suit 00/0/1/2/3 or 4/5 capsule size combination.

From Size 00/0/1/2 you can do one machine with change parts, for size 3, 4 you will have to do one other machine, for size 5 one machine, for size 000 a separate machine.

Output: 2 to 2.5 Lakh capsule per shift

Drive: HP, 3 phase motor, 1400 RPM

Dimension: 630 x 430 x 780 mm

Weight: 75 Kg.

We manufacture Rotary Tablet Press Turret for all types of Rotary Machines of Cadmach, Chamunda, Karnavati and other Manufacturers.

Please advise us on the following while sending the enquiry

1. Model of the Machine

2. Make of the machine

3. how many station

4. what is the tooling

5. Standard or GMP Model

DRUM BLENDER

We are one of the pioneer Pharmaceutical Machinery Manufacturers from India, We manufacture Drum Blender, the blending achieved in Drum Blender is very good and it is one of most popular and conventional Blender used in the Pharma Industry.

TECHNICAL OFFER

Octagonal Blenders, due to its octagonal shape is designed to process to larger volume of material. it occupies less space compared to other similar blenders like V and Double Cone. Power consumption is also less, The blending takes place at low speed during operation. It is well balanced even in higher capacities.

APPLICATION

• Dry powder mixing for tablets and capsules formulations.
• Dry granules sub lots mixing to increase the batch size at bulk lubrication stage of tablet Granules

SALIENT FEATURES:

• Contact parts in stainless steel 304 or 316
• Octagonal shaped with rectangular center, conical discharge frustum and rectangular top frustum
• Baffles provided in the shell
• Manhole with gasket is provided to fix baffles and for ease of cleaning the shell
• Charging and discharging is through a butterfly valve. A conical adaptor can be provided for fixing charging drum after butterfly valve
• Unit can be provided with bin charging arrangement
• All moving parts are enclosed in guards
• A safety railing with a limit switch is provided for operator safety
• Manual Inching arrangement can be provided
• Flame - proof motors with flame - proof push button stations can be provided.

VOLUMETRIC BOTTLE FILLING MACHINE(DOUBLE HEAD)

Description: Semi Automatic Volumetric Liquid Filling Machine is precision built on sturdy welded frame completely enclose in stainless steel sheet and doors are provided to facilitate the servicing of machine. Working on volumetric principle. The unit is made compact, versatile and enclosed in stainless steel elegantly matt finish body

Operation: Containers have to place manually below the filling nozzle at platform of machine. Where motor operated syringe fill desire pre set volume in container, bottle guide are provide for precisely match for centering of container below nozzle, to avoid spillage of liquid on container. The dosing block with a hexagonal bolt fitted below syringe. This means fill size can be easily set.

Electrical: Main Machine:-

1 HP Three Phase motor /415 Volts / 50 Hz.

Filling Range: 100 ML -1000 ML

Net Weight: 120 Kg.

Gross Weight: 275 Kg.

Machine Dimension:650mm (L) x 900 mm (W) x 950mm (H)

Salient Features: Semi-Automatic with filling range.

1% Filling accuracy on single dose.

Three different speeds depending upon capacity of bottles.

Body covered with SS304 sheet. All contact parts SS 316

A unit to fill variety of liquid and can be used for various type of containers.

Minimum change over time from one size to another container or fill size.

TECHNICAL OFFER

RIDDHI MANUAL VIAL BOTTLE INSPECTION BELT WITH BLACK & WHITE BOARD OUTPUT : : Six Feet Length Eight Feet Length Output : 60 to 120 Container/min. (Approx), 80 to 250 Container/min. (Approx) No. of Operator : Four (2 x 2, two side seated), Six (3 x 2, two side seated) Power Supply : 440Volts, 3 Phase, 50Hz., 440 Volts, 3 Phase, 50 Hz. Overall Dimension : 1830mm (L)x760mm (W)x1325mm(H), 2440mm (L)x760mm (W)x1325mm(H) Net Weight : 200kgs, Net Weight : 225 kgsOPTIONAL ACCESSORIES:
Speed variable A.C. frequency drive
OPERATION : :

SS 304 Tubler structure
PVC black & white board as per Gmp Norms
UHMW self lubrication guide below chain
SS elegantly matt finishing
Adjustable height matt finishing
Rigid vibration free construction for trouble free performance

We Manufacture Semi Automatic Alluminium Tube Filling Machine with first fold and second fold and for adhesives M fold is also given , the operator places the tube by hand to the rotary turret , tube is filled , and it goes to first fold, then second fold after that to batch coding station and then to the ejection station only tube is loaded manually all other aspects are taken care by the machine. With tube filling machine you can fill cosmetics, ointments, creams, tooth paste or Petrolium Jelly.

Automatic Liquid Vial Filling & Stoppering Machinefunctions on volumetric principle with diving nozzles. Manufactured using pleasing matte finished stainless steel, the machine is compact and versatile in design. The basic unit is comprised of turntable, unique co. Eccentric pre-gassing, SS316 stat conveyor belt, filling and post-gassing SS316 nozzles extremely efficient and precision built SS316 syringes, non- toxic synthetic rubber tubing's, simple reach compressed panel and with no stopper, no container, no filling System.

Features

• No Vial No Filling System.
• S.S. Elegantly matt finished body.
• Inbuilt scrambler and Unscrambler.
• No Rubber Stopper machines stop system.
• Immediately stopper closing on vial after feeling.

We Manufacture Multi Mill Sieves as per customer requirement. The Sieves are made of SS 316 or SS 304 as per requirement of the customer.