Sika® CemCrete is an acrylic product when added to cement improves properties of cement slurry/mortar/concrete making them excellent choice for use in new construction as well as refurbishment work.

USESSika® CemCrete is a composite waterproof coating system when used in combination with cement, glass fibre, silica sand, etc.

Suitable for waterproofing of :

• Terraces, slabs, balconies & basements Water tanks, sunshades, sunken toilets, swimming pools and other wet areas.
• Repair and renovation works
• Making polymer modified mortar
• Treatment of leaching and saltpetre action

CHARACTERISTICS / ADVANTAGES

• Durable and hard wearing surface on application
• Easy to apply by brush, slurry consistency
• Excellent bonding with most of the substrates.
• Protects against water penetration, salt & carbonation
• Non-corrosive to steel & iron
• Vapour Permeable
• UV resistant & Crack Bridging Property Suitable for contact with potable water when protected with a screed

A Surface Treatment System for Protecting Concrete & Masonry CICO TAPECRETE P-151, popularly known as TAPECRETE is an acrylic based Polymer Modified Cementitious Flexible Composite coating system. CICO TAPECRETE P-151 in conjunction with cement provides properties to combat the shortcomings of plain cement, particularly its poor adhesion properties, low impact strength, low flexural strength and thin section fragility. CICO TAPECRETE P-151 polymer adds to the potential use as well as enhances the properties of cement slurry/ mortar/concrete making them excellent choice for use in new as well as renovation work.

USESCICO TAPECRETE P-151 is used for surface treatment, protecting, waterproofing and repairing concrete and masonry. Waterproofing of basements, toilets, terraces, roofs, swimming pools, water towers etc. General concrete repairs. Protection of concrete against corrosion, salt attack etc.

FEATURES:

• Combines a tough, flexible, hard-wearing surface with waterproofing.
• Allows trapped vapour to escape thus preventing peeling and blistering.
• Can be applied in uniform thickness to horizontal and vertical surfaces.
• Develops excellent bond to most building materials.
• Reduces or prevents salt penetration into concrete.
• Is not affected by ultraviolet light or by chemicals ranging from mild acids to strong alkalies.
• Is highly durable in continuous wet condition.
• Is non-flammable and does not give off toxic gases, when exposed to fire.
• Will not rot or corrode.
• Most properties improve with age.
• Is not harmful to the health of workman.

Single component acrylic polymer for cement based waterproof composite coating membrane

UsesProvides an effective and economical method of waterproofi ng to concrete and masonry surfaces, by mixing with cement and application by brush.

Advantages:

• Non - toxic, non-fl ammable and user friendly
• Provides a tough, impermeable waterproof membrane
• Can be applied by brush, on horizontal and vertical surfaces
• Excellent adhesion to concrete and masonry surfaces
• Protects concrete and mortar from natural elements such as wind, rain, sunlight
• Breathable - allows inside water vapour to escape

DescriptionHydroproof Xtra is formulated to be mixed with cement on site or simply brush applied over concrete

Nitobond AR Std. is a single component latex acyrlic polymer emulsion used as bonding aid cum cement modifier with waterproofing property.

Uses:

• For improving and bonding floor toppings, mortars and renders
• As a bonding agent for Renderoc and other cementitious mortars
• Polymer modified mortars and screeds for reinstatement of worn out/damaged concrete
• Polymer modified concrete for improving the impermeability and there by enhancing the waterproofing property

Advantages:

• Good adhesion - Provides good bond to concrete, masonry, stone work, plaster and block work.
• Increased strength - Improves tensile and flexural properties of mortar.
• Versatile - Compatible with all common hydraulic cements
• User friendly - application by brush/spray
• Improves cohesion - No bleeding and segregation

Modified acrylic emulsion polymer specially for modifying cementitious compositions. Cement Mortars modified with Indofil MC-76 are hard, tough and durable compared with unmodified mortars. They are especially useful where thin sections are desirable and where excessive vibration and heavy loads are encountered.

PROPERTIES:

• Excellent corrosion and water resistance.
• Complete flash and early rust resistance.
• Cures in damp enclosed areas.
• Outstanding flexibility.
• Excellent weatherability and Ambient cure.
• Solvent-free composition.

ADVANTAGES:

• Cement mortars, flooring, plasters modified with Indofil MC-76 have superior flexural, bonding and impact strength, as well as excellent abrasion resistance.
• Indofil MC-76 has excellent waterproofing capability and widely used for waterproofing of floors, rooftops, and maintenance of seepage and leakage. It can be used for crack filling and as tile jointing compound mixing with white cement.
• Indofil MC-76 modified cement mortars doesn't require wet curing as Indofil MC-76 holds the water in the system sufficient for cement curing.
• Indofil MC-76 increases workability of the mortar at one side, at other side thin sections dry rapidly.
• Indofil MC-76 modified cement mortars are resistant to many industrial chemicals, U/V rays and heat.

RECOMMENDED USES:Indofil MC-76 can be used to formulate two component cementitious metal primers that provide low cost excellent protection for both interior and exterior substrates. The cementitious primers based on Indofil MC- 76 are essentially without odor, flammability or other hazards inherent with solventborne systems.

Sika® CemCrete is an acrylic product when added to cement improves properties of cement slurry/mortar/concrete making them excellent choice for use in new construction as well as refurbishment work.

USESSika® CemCrete is a composite waterproof coating system when used in combination with cement, glass fibre, silica sand, etc.

Suitable for waterproofing of :

• Terraces, slabs, balconies & basements Water tanks, sunshades, sunken toilets, swimming pools and other wet areas.
• Repair and renovation works
• Making polymer modified mortar
• Treatment of leaching and saltpetre action

CHARACTERISTICS / ADVANTAGES

• Durable and hard wearing surface on application
• Easy to apply by brush, slurry consistency
• Excellent bonding with most of the substrates.
• Protects against water penetration, salt & carbonation
• Non-corrosive to steel & iron
• Vapour Permeable
• UV resistant & Crack Bridging Property Suitable for contact with potable water when protected with a screed

A Surface Treatment System for Protecting Concrete & Masonry CICO TAPECRETE P-151, popularly known as TAPECRETE is an acrylic based Polymer Modified Cementitious Flexible Composite coating system. CICO TAPECRETE P-151 in conjunction with cement provides properties to combat the shortcomings of plain cement, particularly its poor adhesion properties, low impact strength, low flexural strength and thin section fragility. CICO TAPECRETE P-151 polymer adds to the potential use as well as enhances the properties of cement slurry/ mortar/concrete making them excellent choice for use in new as well as renovation work.

USESCICO TAPECRETE P-151 is used for surface treatment, protecting, waterproofing and repairing concrete and masonry. Waterproofing of basements, toilets, terraces, roofs, swimming pools, water towers etc. General concrete repairs. Protection of concrete against corrosion, salt attack etc.

FEATURES:

• Combines a tough, flexible, hard-wearing surface with waterproofing.
• Allows trapped vapour to escape thus preventing peeling and blistering.
• Can be applied in uniform thickness to horizontal and vertical surfaces.
• Develops excellent bond to most building materials.
• Reduces or prevents salt penetration into concrete.
• Is not affected by ultraviolet light or by chemicals ranging from mild acids to strong alkalies.
• Is highly durable in continuous wet condition.
• Is non-flammable and does not give off toxic gases, when exposed to fire.
• Will not rot or corrode.
• Most properties improve with age.
• Is not harmful to the health of workman.

Single component acrylic polymer for cement based waterproof composite coating membrane

UsesProvides an effective and economical method of waterproofi ng to concrete and masonry surfaces, by mixing with cement and application by brush.

Advantages:

• Non - toxic, non-fl ammable and user friendly
• Provides a tough, impermeable waterproof membrane
• Can be applied by brush, on horizontal and vertical surfaces
• Excellent adhesion to concrete and masonry surfaces
• Protects concrete and mortar from natural elements such as wind, rain, sunlight
• Breathable - allows inside water vapour to escape

DescriptionHydroproof Xtra is formulated to be mixed with cement on site or simply brush applied over concrete

Nitobond AR Std. is a single component latex acyrlic polymer emulsion used as bonding aid cum cement modifier with waterproofing property.

Uses:

• For improving and bonding floor toppings, mortars and renders
• As a bonding agent for Renderoc and other cementitious mortars
• Polymer modified mortars and screeds for reinstatement of worn out/damaged concrete
• Polymer modified concrete for improving the impermeability and there by enhancing the waterproofing property

Advantages:

• Good adhesion - Provides good bond to concrete, masonry, stone work, plaster and block work.
• Increased strength - Improves tensile and flexural properties of mortar.
• Versatile - Compatible with all common hydraulic cements
• User friendly - application by brush/spray
• Improves cohesion - No bleeding and segregation

Modified acrylic emulsion polymer specially for modifying cementitious compositions. Cement Mortars modified with Indofil MC-76 are hard, tough and durable compared with unmodified mortars. They are especially useful where thin sections are desirable and where excessive vibration and heavy loads are encountered.

PROPERTIES:

• Excellent corrosion and water resistance.
• Complete flash and early rust resistance.
• Cures in damp enclosed areas.
• Outstanding flexibility.
• Excellent weatherability and Ambient cure.
• Solvent-free composition.

ADVANTAGES:

• Cement mortars, flooring, plasters modified with Indofil MC-76 have superior flexural, bonding and impact strength, as well as excellent abrasion resistance.
• Indofil MC-76 has excellent waterproofing capability and widely used for waterproofing of floors, rooftops, and maintenance of seepage and leakage. It can be used for crack filling and as tile jointing compound mixing with white cement.
• Indofil MC-76 modified cement mortars doesn't require wet curing as Indofil MC-76 holds the water in the system sufficient for cement curing.
• Indofil MC-76 increases workability of the mortar at one side, at other side thin sections dry rapidly.
• Indofil MC-76 modified cement mortars are resistant to many industrial chemicals, U/V rays and heat.

RECOMMENDED USES:Indofil MC-76 can be used to formulate two component cementitious metal primers that provide low cost excellent protection for both interior and exterior substrates. The cementitious primers based on Indofil MC- 76 are essentially without odor, flammability or other hazards inherent with solventborne systems.