PP PE waterproofing membrane is a composite sheet membrane made of soft polyethylene(PE) with nonwoven polypropylene(PP) fabric laminated on both sides to enable the membrane fixed firmly onto mortar.
PP PE waterproofing membrane is flexible and conforms to various contours of the wood framing, bending upward at the walls and folding into corners. It can be applied directly with thin-set mortar, ceramic and stone tile, provides waterproofing and crack isolation/joint bridging for thin-set installations of ceramic and stone tile. It has been an ideal membrane to protect the substrate from moisture penetration.
PP+PE+PP composite waterproof membrane is made by multiple-ply different materials, especially its aging and weathering resistance layer enables the membrane possess more longer effective age. It can bond with many kinds of adhesions, firm and secure. In case of cement-base, cementations agent can be used, the cementations agent can easily enter into the non-woven felt layer, forms a well-combination with cement after solidification, permanent durability.

• Non-toxic, no pollution, environmental protecting product.
• Can be used for many different surfaces, especially for cement basement.
• Tough, impermeable, multi-layered sheet;
• High tension strength, good cold flexibility.

Usage

• The application is simple and no pollution. It is mainly used in the middle of building for waterproofing. On this layers of protection and decoration are needed;
• When application, pour the adhesive materials homogeneously on the smooth roof deck, then roll the membrane to make is fully adhered to the deck.
• The adhesive materials are usually made form cement or other building glue.
• Products used in roofing, basement, restroom, water conservation, warehouse to protect structure from water infiltration.

Two-component, high flexibility cementitious mortar, for waterproofing concrete surfaces, balconies, terraces, basins, and swimming pools. Can be applied by brush or with a roller.

APPLICATIONS:

• Mapelastic Smart is used to form highly flexible, waterproof, and protective dressings on concrete structures, even those subject to cracking.
• It may be applied on cementitious screeds, existing floors (clean and well bonded to the substrate) and renders to waterproof bathrooms, showers, balconies, terraces, and swimming pools before laying ceramic and natural stone.
• The mortar is applied by brush or with a roller on surfaces that must be perfectly clean and sound.
• Apply thickness of at least 2 mm and embed the Fibreglass Mesh or Mapetex Sel.
• Avoid the Mapelastic Smart membrane come into contact with water for 24 hours after laying.
• Wait at least 5 days before laying ceramic tiles.

BITUTHENE® 3000 are self-adhesive, rubberized asphalt/polyethylene waterproofing membranes for elevated plaza and parking decks and below grade basements, tunnels, and other subterranean applications. GCP Applied Technologies’ (“GCP”) BITUTHENE® 3000 combine a robust, flexible, pre-formed high performance, cross laminated, HDPE carrier film with a tacky, self-adhesive rubberized asphalt compound specifically designed to adhere to cured concrete surfaces.

Product Advantages

• Specifically designed as a barrier to water, moisture, and gas by physically isolating the structure from the surrounding substrate
• Cross laminated film is dimensionally stable, with high tear strength, puncture, and impact resistance
• Cold applied – No flame hazard; self-adhesive overlaps designed to provide membrane continuity
• Chemically resistant to most soil conditions, membrane is designed to provide eective external protection against aggressive soils and groundwater
• Flexible – Elongation in excess of 300% helps accommodate minor settlement and shrinkage movement
• Controlled thickness – Factory-made sheet allows for constant, non-variable site application
• RIPCORD® integrated filament split release on demand – Ease of membrane positioning in detailed areas

Wide application window -

• BITUTHENE® low temperature membrane when surface and ambient temperatures are between 25°F (-4 °C) and 60°F (16 °C)
• BITUTHENE® 3000 membrane for use when surface and ambient temperatures are at 40 °F (5°C) or above

A high performance, low odour, one-part, fast-curing, high solids, pure polyurethane elastomer waterproof membrane. It is specially formulated for easy roller application of all permanently flexible, tough, high build, long-life waterproof barriers.

Features

• Easy, fast, high build, one-coat application with brush or roller is possible.
• Simple, seamless, fast-cure membrane.
• Excellent chemical resistance, suitable for acid sulphate soils.
• Waterproof — resists ponded water.
• Permanently flexible — total adhesion.
• Root penetration resistance - DIN4062 compliance.
• Systems for Total Project Specification.

Silcor® 560 is a pure polyurethane elastomer. It does not contain bitumen or tar and will not bleed or stain. It is engineered to allow high build application without multi-layering and/or reinforcing mat. Design a Total Waterproofing Envelope package with waterproofing systems from GCP Applied Technologies.

Uses

• Wet Areas — bathrooms, shower trays, laundries, toilets, spas.
• External (non-exposed) — balconies, roof-decks, sill or window flashings, podiums, planters.
• External (exposed) - non trafficable areas, e.g. wall, planters.
• Tanking — retaining walls, landscaped areas, ponds, water features, non-potable water storage.
• It can be applied to most stable surfaces — block, brick, concrete, render, timber, CFC, GRC, ALC, etc.
• Vertical and horizontal application.

We offer geotextile fabric that has the right permeability to ensure that the sand is properly filtered or drained. The properties of our fabric make it an ideal product for various applications like assisting in drainage, controlling erosion, and even increasing the stability of soil. It is available in all forms to aid stabilization, filtration, and separation. You can count on us for your requirement of wholesale geotextile fabric in India. Our staff has been trained to ensure the fabric has a precise composition.

PP PE waterproofing membrane is a composite sheet membrane made of soft polyethylene(PE) with nonwoven polypropylene(PP) fabric laminated on both sides to enable the membrane fixed firmly onto mortar.
PP PE waterproofing membrane is flexible and conforms to various contours of the wood framing, bending upward at the walls and folding into corners. It can be applied directly with thin-set mortar, ceramic and stone tile, provides waterproofing and crack isolation/joint bridging for thin-set installations of ceramic and stone tile. It has been an ideal membrane to protect the substrate from moisture penetration.
PP+PE+PP composite waterproof membrane is made by multiple-ply different materials, especially its aging and weathering resistance layer enables the membrane possess more longer effective age. It can bond with many kinds of adhesions, firm and secure. In case of cement-base, cementations agent can be used, the cementations agent can easily enter into the non-woven felt layer, forms a well-combination with cement after solidification, permanent durability.

• Non-toxic, no pollution, environmental protecting product.
• Can be used for many different surfaces, especially for cement basement.
• Tough, impermeable, multi-layered sheet;
• High tension strength, good cold flexibility.

Usage

• The application is simple and no pollution. It is mainly used in the middle of building for waterproofing. On this layers of protection and decoration are needed;
• When application, pour the adhesive materials homogeneously on the smooth roof deck, then roll the membrane to make is fully adhered to the deck.
• The adhesive materials are usually made form cement or other building glue.
• Products used in roofing, basement, restroom, water conservation, warehouse to protect structure from water infiltration.

Two-component, high flexibility cementitious mortar, for waterproofing concrete surfaces, balconies, terraces, basins, and swimming pools. Can be applied by brush or with a roller.

APPLICATIONS:

• Mapelastic Smart is used to form highly flexible, waterproof, and protective dressings on concrete structures, even those subject to cracking.
• It may be applied on cementitious screeds, existing floors (clean and well bonded to the substrate) and renders to waterproof bathrooms, showers, balconies, terraces, and swimming pools before laying ceramic and natural stone.
• The mortar is applied by brush or with a roller on surfaces that must be perfectly clean and sound.
• Apply thickness of at least 2 mm and embed the Fibreglass Mesh or Mapetex Sel.
• Avoid the Mapelastic Smart membrane come into contact with water for 24 hours after laying.
• Wait at least 5 days before laying ceramic tiles.

BITUTHENE® 3000 are self-adhesive, rubberized asphalt/polyethylene waterproofing membranes for elevated plaza and parking decks and below grade basements, tunnels, and other subterranean applications. GCP Applied Technologies’ (“GCP”) BITUTHENE® 3000 combine a robust, flexible, pre-formed high performance, cross laminated, HDPE carrier film with a tacky, self-adhesive rubberized asphalt compound specifically designed to adhere to cured concrete surfaces.

Product Advantages

• Specifically designed as a barrier to water, moisture, and gas by physically isolating the structure from the surrounding substrate
• Cross laminated film is dimensionally stable, with high tear strength, puncture, and impact resistance
• Cold applied – No flame hazard; self-adhesive overlaps designed to provide membrane continuity
• Chemically resistant to most soil conditions, membrane is designed to provide eective external protection against aggressive soils and groundwater
• Flexible – Elongation in excess of 300% helps accommodate minor settlement and shrinkage movement
• Controlled thickness – Factory-made sheet allows for constant, non-variable site application
• RIPCORD® integrated filament split release on demand – Ease of membrane positioning in detailed areas

Wide application window -

• BITUTHENE® low temperature membrane when surface and ambient temperatures are between 25°F (-4 °C) and 60°F (16 °C)
• BITUTHENE® 3000 membrane for use when surface and ambient temperatures are at 40 °F (5°C) or above

A high performance, low odour, one-part, fast-curing, high solids, pure polyurethane elastomer waterproof membrane. It is specially formulated for easy roller application of all permanently flexible, tough, high build, long-life waterproof barriers.

Features

• Easy, fast, high build, one-coat application with brush or roller is possible.
• Simple, seamless, fast-cure membrane.
• Excellent chemical resistance, suitable for acid sulphate soils.
• Waterproof — resists ponded water.
• Permanently flexible — total adhesion.
• Root penetration resistance - DIN4062 compliance.
• Systems for Total Project Specification.

Silcor® 560 is a pure polyurethane elastomer. It does not contain bitumen or tar and will not bleed or stain. It is engineered to allow high build application without multi-layering and/or reinforcing mat. Design a Total Waterproofing Envelope package with waterproofing systems from GCP Applied Technologies.

Uses

• Wet Areas — bathrooms, shower trays, laundries, toilets, spas.
• External (non-exposed) — balconies, roof-decks, sill or window flashings, podiums, planters.
• External (exposed) - non trafficable areas, e.g. wall, planters.
• Tanking — retaining walls, landscaped areas, ponds, water features, non-potable water storage.
• It can be applied to most stable surfaces — block, brick, concrete, render, timber, CFC, GRC, ALC, etc.
• Vertical and horizontal application.

We offer geotextile fabric that has the right permeability to ensure that the sand is properly filtered or drained. The properties of our fabric make it an ideal product for various applications like assisting in drainage, controlling erosion, and even increasing the stability of soil. It is available in all forms to aid stabilization, filtration, and separation. You can count on us for your requirement of wholesale geotextile fabric in India. Our staff has been trained to ensure the fabric has a precise composition.