Our Products
REX custom made insulation jackets are designed to insulate wide variety of equipment including valves, flanges, calorifiers, strainers, separators, actuators, heat exchangers, elbow bends, etc helping to deliver up to 97% energy conservation, and provide exceptional Thermal Conductivity properties. They are also commonly used to provide insulation against low temperatures and protect personnel from burns by reducing the temperature of the exposed pipework surfaces.
Additionally, end users enjoy an attractive return on their Insulation system investment based solely on energy savings. The payback period accelerates as equipment size and operating temperature increases.
Key Benifits
Typical Applications | Typical Requirements |
---|---|
Exchangers | Energy Conservation |
Exhaust Manifolds | Personnel Protection |
Flanges | Process Stability |
Filters | Leak Detection |
Instruments | Freeze Protection |
Piping | Fire Protection |
Pumps | Acoustical Abatement |
Turbines | Corrosion Protection |
Valves | Simplified Maintenance |
Our Tadpole gaskets are designed to provide a high temperature thermal seal in industrial laboratory, commercial and residential ovens and dryers with a maximum continuous operating temperature of 1000F / 540C. Constructed with Type E fiberglass, the bulb may be filled with various constructions of either fiberglass or stainless steel in order to achieve the proper design compression.
Additionally, the bead of the tadpole may also be filled to accommodate various door constructions. Textile engineering coupled with our heat treating and coating expertise, allow for a wide variety of constructions in order to meet unique environmental and design constraints.
This high temperature, heat and flame resistant thermal insulating vermiculite coated fiberglass fabric will withstand temperatures of 1500F / 815C continuous exposure and is capable of withstanding temperatures of 2000F / 1093C for short periods.
The base High Temperature fiberglass fabric is fabricated from high quality type E fiberglass that will not burn. The fabric is then coated with a vermiculite dispersant.
This material resists most acids and alkalis and is unaffected by most bleaches and solvents. It is highly flexible and conformable.
Applications:Common application include welding spark protection blankets/ curtains, plumbers pads, fire protection, insulation mattress/jacket cover material, high temperature fabric seals.
Thickness (mm) | Width (mm) | Length (m/roll) | Base fabric weight (g/㎡) |
---|---|---|---|
0.75 | 1000 | 50 | 610 |
1.4 | 1000 | 50 | 1080 |
2 | 1000 | 50 | 1400 |
3 | 1000 | 50 | 1900 |
1.3 | 1000 | 50 | 1000 |
Slade starts with special patented yarns. The yarns are reinforced with flattened strips of stainless steel and totally encapsulated in flexible graphite (fig. 1). We weave these yarns into sheets 80 wide (lengths: 80, 160 and higher).
The woven design produces a metallic leaf-spring effect (fig. 2), developed to deform easily to fill voids, scratches and warped surfaces. Once compressed, they form a tough but resilient graphite sheet. The sheet cuts easily despite their toughness.