We offer superior Sprinkler Irrigation System that is designed considering the crops grown, availability of water and its composition, type of soil, elevation, temperature, humidity and wind velocity in order to get the best possible results. Our Sprinklers Irrigation System is capable of irrigating a much larger area as compared to the traditional flood irrigation system. The system is effectively used on almost all the crops grown in country like wheat, gram, soyabean, vegetables, cotton, sugarcane, flowers, groundnut, mustard, etc.Agronomists all over the world believe that the sprinkler irrigation system is the best method to get maximum yield at an extremely low cost. Using sprinkler system can irrigate 2 to 3 time more farm land with same quantity of water. The sprinkler system cleans the surface of the plants, which help in easy photosynthesis thus making plants able to produce more. It saves from irregularities of the weather. In winters it saves from freezing of water. In summers it saves evaporation of water up to 40 %. The Sprinkler effect (like rain) saves water from flowing away and maximum water reaches to the roots of the plants. It spreads water around the farm in equal quantity thus saving plants from bad effects of water clogging and water scarcity. With Sprinkler Irrigation System farming can be done easily on uneven surfaces.

HDPE COILS are one of the most dynamic products of the Plastics field as they can be used for a number of purposes.Their basic uses are Drip Irrigation, Duct for Wires, Water distribution, etc.We manufacture these HDPE Pipes/Coils in various sizes, lengths and wall thickness depending upon the consumer's needs and preferences. Outfitted with a state-of- the-art manufacturing unit as well as excellent quality control practices, we bring forth a huge array of HDPE coil manufacturer which are designed to support many industrial usages like construction, agriculture etc. Acknowledged for their efficiency and durability, our HDPE coils also possess high flexible impact strength that helps them in withstanding extreme pressure and adverse climatic conditions. A substitution for conventional piping, our High-Density Polyethylene Coils are tough and resistant to chemicals. Our pipes/coils are offered in different dimensions and sizes as per the specifications of our clients.

Application
Corrosion and chemical resistant PE pipe.Metric series sizes 20mm to 110mm for use at temperatures up to and including 80 o C.Pressure rating 2.5 Kgf/cm 2 to 25 Kgf/cm 2 . Highly resistant to most acids, bases, salts, aliphatic solutions, oxidants, and halogens.Typical applications includes: chemical processing, plating, potable water systems, water and waste watertreatment, irrigation, agricultural, and other industrial applications involving corrosive & acidic fluid transfer. ScopeOutlined specificationIS: 4984-1995, This pipe is intended for use in applications where the fluid conveyed does not exceed 80 o C.

Properties remain unchanged upto temperature 600 C (continuously) and 900 C (for Short time.) Size 20 mm (0.5") to 110mm (4") (Available in SCH-40, SCH-80 & SCH-120) Specifications followed: As per ASTM-D-1785

Building Construction
These Pipes are useful for water connections to bathrooms, kitchen sinks, washbasins and laboratories.
Potable Water Supply
It can be used in Commercial Complexes, individual homes, flats, offices, hotels, hospitals and transport terminals.
Industrial Application
Distribution of Milk, Chemicals and gases in dairies, plants and industrial estates. In agriculture, telecommunication, irrigation projects etc.
Installation
Use of Teflon Tape recommended to avoid damage and subsequent leakage. Can also be jointed to metal pipes and fittings. No special equipment required. Lesser time-consuming than metal pipes. Benefits
Resistant to Corrosion.
Low frictional loss,
Non-toxic
Weather-resistant.
Smooth internal surface
Tough and strong.
Durable
Impact-resistant.
Maintenance-free
Termite-proof,
Inert to chemicals,
Quick and easy jointing.
Flexible
Light-weight
Self-extinguishing.
Moisture-proof
Wear and abrasion resistant.
Good thermal and electrical
Insulation.

REX HDPE Pipes are manufactured from High Density Polyethene Grade Material PE-63, PE-80, PE-100 a most versatile material suitable for pipes. HDPE pipes are of low costs and high performance. The pipes are better substitute for costly Metallic and Non Metallic pipes like DI, CI, MS, GI, AC. HDPE Pipes are generally made black in colour by addtion of Carbon Black to protect from ageing & degradation due to ultraviolet sunrays. Pipes are manufactured in sizes from 20mm to 315mm Outside Diameter in all Classes/ Pressure Ratings as per IS:4984:1995 & IS:14151:1994 duly ISI marked. The pipes are available in Coil Form or Straight Lengths depending on sizes and customer requirements.

Light WeightFlexibilityToughnessChemically InertResistance to AbrasionSmooth SurfaceEnvironmental Stress Crack ResistanceCorrosion ResistanceFrost & Rodent ResistanceHygenic SafetyEasy & Quick InstallationLow Thermal Conductivity

Manufactured at our modern, well equipped plant, Rex winding wires are insulated with a very superior grade of PVC compound formulated and manufactured in-house, to give it the necessary electrical strength and resistance to abrasion, further helped us upgrade our technology. The copper conductor of required purity and conductivity is drawn and annealed to stringent specifications. Best technology and automation online controlled in the process consistently give high quality to Rex winding wire.

We offer superior Sprinkler Irrigation System that is designed considering the crops grown, availability of water and its composition, type of soil, elevation, temperature, humidity and wind velocity in order to get the best possible results. Our Sprinklers Irrigation System is capable of irrigating a much larger area as compared to the traditional flood irrigation system. The system is effectively used on almost all the crops grown in country like wheat, gram, soyabean, vegetables, cotton, sugarcane, flowers, groundnut, mustard, etc.Agronomists all over the world believe that the sprinkler irrigation system is the best method to get maximum yield at an extremely low cost. Using sprinkler system can irrigate 2 to 3 time more farm land with same quantity of water. The sprinkler system cleans the surface of the plants, which help in easy photosynthesis thus making plants able to produce more. It saves from irregularities of the weather. In winters it saves from freezing of water. In summers it saves evaporation of water up to 40 %. The Sprinkler effect (like rain) saves water from flowing away and maximum water reaches to the roots of the plants. It spreads water around the farm in equal quantity thus saving plants from bad effects of water clogging and water scarcity. With Sprinkler Irrigation System farming can be done easily on uneven surfaces.

HDPE COILS are one of the most dynamic products of the Plastics field as they can be used for a number of purposes.Their basic uses are Drip Irrigation, Duct for Wires, Water distribution, etc.We manufacture these HDPE Pipes/Coils in various sizes, lengths and wall thickness depending upon the consumer's needs and preferences. Outfitted with a state-of- the-art manufacturing unit as well as excellent quality control practices, we bring forth a huge array of HDPE coil manufacturer which are designed to support many industrial usages like construction, agriculture etc. Acknowledged for their efficiency and durability, our HDPE coils also possess high flexible impact strength that helps them in withstanding extreme pressure and adverse climatic conditions. A substitution for conventional piping, our High-Density Polyethylene Coils are tough and resistant to chemicals. Our pipes/coils are offered in different dimensions and sizes as per the specifications of our clients.

Application
Corrosion and chemical resistant PE pipe.Metric series sizes 20mm to 110mm for use at temperatures up to and including 80 o C.Pressure rating 2.5 Kgf/cm 2 to 25 Kgf/cm 2 . Highly resistant to most acids, bases, salts, aliphatic solutions, oxidants, and halogens.Typical applications includes: chemical processing, plating, potable water systems, water and waste watertreatment, irrigation, agricultural, and other industrial applications involving corrosive & acidic fluid transfer. ScopeOutlined specificationIS: 4984-1995, This pipe is intended for use in applications where the fluid conveyed does not exceed 80 o C.

Properties remain unchanged upto temperature 600 C (continuously) and 900 C (for Short time.) Size 20 mm (0.5") to 110mm (4") (Available in SCH-40, SCH-80 & SCH-120) Specifications followed: As per ASTM-D-1785

Building Construction
These Pipes are useful for water connections to bathrooms, kitchen sinks, washbasins and laboratories.
Potable Water Supply
It can be used in Commercial Complexes, individual homes, flats, offices, hotels, hospitals and transport terminals.
Industrial Application
Distribution of Milk, Chemicals and gases in dairies, plants and industrial estates. In agriculture, telecommunication, irrigation projects etc.
Installation
Use of Teflon Tape recommended to avoid damage and subsequent leakage. Can also be jointed to metal pipes and fittings. No special equipment required. Lesser time-consuming than metal pipes. Benefits
Resistant to Corrosion.
Low frictional loss,
Non-toxic
Weather-resistant.
Smooth internal surface
Tough and strong.
Durable
Impact-resistant.
Maintenance-free
Termite-proof,
Inert to chemicals,
Quick and easy jointing.
Flexible
Light-weight
Self-extinguishing.
Moisture-proof
Wear and abrasion resistant.
Good thermal and electrical
Insulation.

REX HDPE Pipes are manufactured from High Density Polyethene Grade Material PE-63, PE-80, PE-100 a most versatile material suitable for pipes. HDPE pipes are of low costs and high performance. The pipes are better substitute for costly Metallic and Non Metallic pipes like DI, CI, MS, GI, AC. HDPE Pipes are generally made black in colour by addtion of Carbon Black to protect from ageing & degradation due to ultraviolet sunrays. Pipes are manufactured in sizes from 20mm to 315mm Outside Diameter in all Classes/ Pressure Ratings as per IS:4984:1995 & IS:14151:1994 duly ISI marked. The pipes are available in Coil Form or Straight Lengths depending on sizes and customer requirements.

Light WeightFlexibilityToughnessChemically InertResistance to AbrasionSmooth SurfaceEnvironmental Stress Crack ResistanceCorrosion ResistanceFrost & Rodent ResistanceHygenic SafetyEasy & Quick InstallationLow Thermal Conductivity

Manufactured at our modern, well equipped plant, Rex winding wires are insulated with a very superior grade of PVC compound formulated and manufactured in-house, to give it the necessary electrical strength and resistance to abrasion, further helped us upgrade our technology. The copper conductor of required purity and conductivity is drawn and annealed to stringent specifications. Best technology and automation online controlled in the process consistently give high quality to Rex winding wire.