Rev Aircon India (P) Limited.

Naroda, Ahmedabad, Gujarat

Modine steam coils are specifically designed with condensate management in mind. Tube and connection size are combined to limit condensate retention in the coil, preventing water hammer while delivering even distribution of steam on the entire face.

With single-tube coils, the steam supply and condensate return headers and connections are normally at the opposite ends of the coil. Uniform steam distribution to each of the coil core tubes is accomplished through careful header-assembly design. The steam supply connection should be located in the centre of the header, with a perforated plate-type baffle located directly behind this connection. Carefully sized orifices are located in each of the core tube entrances into the header.

Dual-tube coils utilise a smaller inner tube, with precisely spaced, directional, orifice-type perforations. This helps to direct condensate flow to the return header. The steam supply, condensate-return headers, and connections may be fabricated in 'same-end' or 'opposite-end' orientation.

• Commercial and industrial heating systems
• Commercial and industrial drying and processing applications

Combining outstanding quality and value, our firm offers a wide assortment of Finned Tube Heat Exchangers. The offered Finned Tube Heat Exchangers are designed and manufactured by the experts as per the international standards and requirements of the clients. These Finned Tube Heat Exchangers are widely used by the industries for cooling or heating of air and other gases which flow in a duct or cooling of water using air.

We are a prominent Manufacturer and Exporter of high quality Floor Mounted Air Handling Units. The Floor Mounted Air Handling Units offered by us are widely used in various buildings and hotels. Our Floor Mounted Air Handling Units are appreciated in many industries and clients for their durability and long working life and are available at competitive market prices.

Options Available

• Removable Panels
• Space Saver
• Quiet & Vibration Free
• Easy to install & Service
• Available in various sizes
• High Static fan for high efficiency filters
• Whether Proof
• Adoptable to wide range of applications such as Pharma , Food Industries , Clean Rooms , Comforts & process

We offer Industrial Air Washer to our client.

We are one of the leading manufacturers & suppliers of Clean room petition puf panel .

Glasswool/Rockwool Panel is the ideal material for use in achieving a desired acoustic performance. It is made upto bibroporous basalt stone with air-filled interconnected sapces. This structure gives excellent acoustic properties as it significantly diminshes occurrences of vertical sound waves on adjacent surfaces.

Glasswool/Rockwool Panel 100% safe and Green product. Panel is designed and manufactured to achive excellent acoustic insulation performance in all type of dry wall partion, acoustic panel, fabric acoustic panels. It is recmmonded to be used for schools, offices , residential and industrial buildings, hospitals etc.

With the support of talented and experienced professionals, we are engaged in manufacturing, exporting and supplying optimum quality Curved Grille to our clients. The offered grill is used for air supply and ventilation. The provided grill is manufactured using latest technology and quality tested raw materials under the strict observation of our highly skilled experts. Moreover, our precious clients can avail this Curved Grille in numerous specifications as per their requirement at rock bottom prices.

• Ruggedness
• Precisely engineered
• Easy to install
• Rust resistance

Keeping the pace with the current market developments, we are engaged in manufacturing, exporting and supplying an excellent range of Combination With Filter Frame. The offered product is manufactured at our well-equipped production unit using best grade raw materials and advanced technology under the stern surveillance of skilled technocrats. This product is used for filtering air from the source. Our prestigious clients can avail this Combination With Filter Frame in various specifications as per their needs at reasonable prices.

• Perfect finish
• Strong construction
• Excellent durability
• Easy installation

We are offering a wide range of Air Damper to our industrial clients. Offered in a compact design and rigid structure, these products are painted with aluminum and powder coated. Being motor operated these are known for their fusible links. On specific demand of clients, we offer these products in a heat resistant painting.

Gravity dampers allow for the passage of air from inside the air unit to go towards the outside, to prevent overpressure inside the unit. The Gravity damper is all made of aluminium extruded profiles; the frame is assembled using the same profiles of the standard damper, whereas the damper blade and the accessories are new. The assembling, thanks to self-threading screws, needs no welding. The punching machine used to punch the profiles is the same used for the APS AROSIO dampers.

hot water heating coilis manufactured by us for various type of systems with water or glycol. The circuiting design makes coils drainable while we offer standard vents and drain for all header coils. As per application requirements, we can manufacture and provide casing, fin material, and circuiting in customized forms.

materials of construction

• fin material options
  • die-formed corrugated plate type fin
  • full-drawn fin collars for accurate control of spacing and maximum tube contact
  • standard aluminum fin 0.13mm thick with optional (0.15mm)
  • optional copper and blue coated fins thicknesses available are (0.12mm) (0.13mm) and (0.15mm)
  • fins per inch :4 to 14
• tube materials (imported)
  • hairpin at one side of coils
  • return bends :seamless copper tube with 0.91mm thick
  • mechanically expanded tubes forming interference fit with fin collars
  • specifications
    • 5/8" o.d. X 0.42mm wall thickness standard with optional wall thickness of (0.56mm) (0.71mm) and (0.91mm)
    • 1/2" o.d. X 0.42mm wall thickness standard with optional wall thickness of (0.56mm) (0.71mm) and (0.91mm)
    • 3/8" o.d. X 0.42mm wall thickness standard with optional wall thickness of (0.56mm) (0.71mm) and (0.91mm)
  • rows available :1-2
• headers
  • ms, copper or stainless steel header
  • at a parallel surface to coil tube resulting in strong brazing joints
  • vertically mounted coils and horizontally running tubes in circuiting designed for gravity-drain
• casing
  • flanges :16-gauge minimum thick material, die-formed for easy mounting and stacking
  • coils over 44" fin length having intermediate tube supports with additional support every 42" multiple
  • material options :galvanized steel standard. Optional ss, aluminum and copper.
• brazing
  • joints :high temperature filler metals. At least 5% silver brazing in manifold connections

testing & performance

• coil assemblies are tested at 400 psig
• dry nitrogen used
• submerged under water
• standard construction suitable for
  • pressure :250 psi
  • temperature :up to 300 degrees f
• performance certified under revlon

We are a chief Manufacturer and Exporter of Terminal Hepa Boxes. All the raw materials used in the manufacturing of Terminal Hepa Boxes are of superior quality so as to provide clients with the best products available in the industry. Our Terminal Hepa Boxes are well highly appreciated by many clients and are widely demanded in many industries. These Hepa Boxes are available at nominal prices. Construction :

• Terminal Box is fabricated with high quality stainless steel and CRCA steel gauge up to 14 gauges with powder coated/buffing finish.
• RI terminal box is fabricated with Aluminum & SS perforated sheet

Application :

• Terminal Box enhance the overall appearance of the clean rooms

Features :

• Durable
• High performance
• Superior quality
• Competitively priced

We are among the most trusted Manufacturers and Exporters ofCeiling Mounted Air Handling Units. The Ceiling Mounted Air Handling Units offered by us are of high quality and made using superior quality raw materials so as to provide our customers with the best products available in the industry.

Capacity Range :

• 800 CFM to 8000 CFM

Applications :

• Shopping Malls
• Multiplexes
• Small Offices

Features :

• Compact, low height with single / multi centrifugal fan
• Direct driven / belt driven options
• Units available in double / single skin
• Double skin units available with aluminum profile
• Direct driven units with single-phase motors

we are a prominent manufacturer and exporter of premium qualityduct dampers. The duct dampers offered by us are installed in branches of air distribution ducts, these opposed blade dampers are used to carry out a rough air system balance with closer control being carried out at the individual grilles or diffusers. These duct dampers are available in aluminum or galvanized steel. Motorized available.

features

• aerofoil/ groove profile opposed blades
• gear / steel linkage driven
• double nylon bushing for friction free operation

We are a leading Manufacturer and Exporter of Return Air Risers. The Return Air Riser we offer is widely demanded in many industries and is appreciated by many clients for its qualitative features. Further, we offer Return Air Risers at market leading prices. Construction :

• Return Air Risers are made in stainless steel, anodized, aluminum, powder coated CRCA steel & double skin.
• Aluminum Air Filters with Aluminum & SS perforated sheet along with filters & dampers.

Features :

• Durable
• High performance
• Superior quality
• Competitively priced

Volume control dampers are specially designed for low leakages of air.Dampers are available in GI opposed blade type, aluminium extruded blade type, face and bypass. Such as electrical actuator or fusible link.Blades are provided with brass or nylon bush with gear operated.

We are pioneers of Mist cooling technology for more than two decades based at Pune. Our Mist cooling System (MCS) replaces conventional induced draft cooling towers. Mist Creation Nozzles are invented & developed by us & is Patented technology.Using the same principle of Mist creation, we have developed efficient spray for Air washers and are now becoming more & more popular. As we are aware Air washers are used to maintain desired humidity levels inside halls, it is important that water is evaporated and added as water vapors in air to raise humidity. Since our Mist creation Nozzles break water particle to tiny mist, it is very easy to have highest evaporation and hence best humidity levels are built with less water circulation and hence saves powers also .