Kolkata, West Bengal, India
Our Products
Regarded as a well-known Manufacturer and Supplier of Hard Aluminium Blister Foil in the industry, we ensure that our Hard Aluminium Blister Foil remains highly competitive and capable of catering diverse industrial sectors. We offer a Hard Aluminium Blister Foil that is preferred for pharmaceutical products packaging. Hard Aluminium Blister Foil is used to pack tablets, and capsules. Hard Aluminium Blister Foil, offered by us, is protected with heat seal coating that makes it durable and strong.
Heat Seal Coating : Colorless Vinyl Resin (option for tinted resin available) conforming to the applicable Government regulations regarding direct contact with medicines and drugs. The resin is suitable for heat sealing to PVC/PVDC coated PVC films. Coating Thickness OptionsSpecifications
| Standard Foil Gauge Options | Tolerance ( +/-8% ) |
|---|---|
| 0.020 mm | +/- 0.0016mm |
| 0.025 mm | +/- 0.002 mm |
| 0.030 mm | +/- 0.0024 mm |
| winding Direction | Generally printed or clear lacquer side is out with heat Seal coating inside. |
|---|---|
| Core | Material options: (a) Plastic (b) Aluminium (c) Card Board Core ID : 76 mm +/- 0.5 mm The length of the core is equal to the width of the web |
| Splices | Butt type made with 25 mm pressure sensitive tape. |
| Reel Outer diamter | 250 +/- 10 mm for slit material, 400 +/- 10 mm for Jumbos |
| Reel Wander | Within +/- 1 mm |
| Reel/Web Width | Plain: 45mm to 800 mm with a tolerance of +/- 0.5 mm. Printed: 45mm to 600 mm with a tolerance of +/- 0.5 mm |
| Joint Per Reel | Maximum 2. Average less than 1. |
| Pin Holes | 0.025 and 0.03 mm foils are free from pin holes. In 0.02 mm foil, 40% of foil is free from pin holes, rest less than 10 PSM |
| Identification | Each reel shall be identified with a sticker pasted inside the core with Reel numbers. Specification, Net weight, Operator number & Date manufacture. | |
| Packing | Blister foils are packed in cardboard carton. Relevant Markings are provided On each outer package. | |
| Recommended Operating Conditions | Sealing temperature | 170 to 180 deg. C |
| Sealing pressure | 2.8 to 5.6 kg/Sq. cm 40 to 80 lbs/Sq. inch | |
| Dwell time | 0.25 to 0.5 sec. | |
| Covering Area of 1 Kg finished Material (Nominal) | Gauge & Temper Foil | Covering area in Sq. M/Kg with 4 GSM nominal Heat Sealing Coating |
| 0.02 (hard) 0.025 (hard) 0.03 (hard) | 17.18 13.94 11.72 | |
| Test Certificates | Test certificates giving the actual observed values of different parameters will accompany the supplies. | |
Table Showing Thickness Tolerances of Foil
| Foil Gauge | Thickness ( mm ) | GSM | ||||
| Min. (-8%) | Nominal | Max. (+8%) | Min. (-8%) | Nominal | Max. (+8%) | |
| 0.025 mm | 0.023 | 0.025 | 0.027 | 62.33 | 67.75 | 73.17 |
| 0.03 mm | 0.028 | 0.030 | 0.032 | 74.80 | 81.30 | 87.80 |
| 0.04 mm | 0.037 | 0.040 | 0.043 | 99.73 | 108.4 | 117.07 |
We are prominent Manufacturer and Supplier of Soft Aluminium Blister Foil having structure of Paper/Poly/Foil/Poly. Soft Aluminum Blister Foil, provided by us, is used for packaging of Pharmaceutical products such as oral powders, capsules, tablet, etc. Our Soft Aluminium Blister Foil is made with specifications as per desired by the client. Not only this, we make sure that our Soft Aluminium Blister Foil is made with high-grade aluminium alloy such as AA 1200 / AA 1235 conforming to Aluminium Association specification.
Foil Material
| Standard Foil Gauge Options | Tolerance ( ± 8% ) |
|---|---|
| 0.009 | ± 0.00072 |
| 0.012 | ± 0.00096 |
| 0.030 mm | +/- 0.0024 mm |
| Standard Poly Gauge | Nominal GSM | Tolerance ( +/-8% ) |
|---|---|---|
| (A) As a sandwich layer | - | - |
| 75 | 17.10 | 2.57 |
| (B) As a sealant layer | - | - |
| 150 | 34.39 | 5.16 |
| 200 | 45.85 | 6.88 |
Quality of our Aluminium Strip Foil conforms to Aluminium Association specification. We use high grade aluminium alloy such as AA 8011 / AA 1200 that are soft and fully annealed for manufacturing Aluminium Strip Foil. Our Aluminium Strip Foil is best suitable for packaging Pharmaceutical products like Capsules, Tablet, etc. We provide Aluminium Strip Foil according to the specifications stated by the clients.
Specifications
| Std Foil Gauge Options | Tolerance ( +/-8% ) | Min. Bursting Strength |
|---|---|---|
| 0.025 mm | +/- 0.002 mm | 1.5 kg/sq. cm |
| 0.030 mm | +/- 0.0024 mm | 1.9 kg/sq. cm |
| 0.040 mm | +/- 0.0032 mm | 2.5 kg/sq. cm |
| Standard Polymer Gauge | Nominal | Tolerances ( +/- 15% ) |
|---|---|---|
| Options | GSM | GSM |
| 150 | 34.39 | +/- 5.16 |
| 180 | 41.27 | +/- 6.19 |
| 200 | 45.85 | +/- 6.88 |
| Density of LDPE | 0.917 g/cc |
| Peel Strength of Lamination | 200 g/15 mm min. |
| Seal Strength Bet Top & Bottom Foil | 450 g/15 mm min. |
| Printing and Lacquer Coating | Printed as per text, layout and approved by the Customer. For non-printed specification, clear Lacquer to be coated as a protective coating and good printability. Printing inks and lacquer coatings are capable to withstand 180 deg. C for 1 sec. dwell time. |
| Configuration | Printed and Unprinted Pharma Foils are available in the reel forms. Unprinted pharma foils are also available as Jumbo roll. |
| Winding Direction | Generally, printed or clear lacquer side is out in the finished reel. |
| Core | Material options (a) Plastic (b) Aluminium (c) Card Board CORE ID: 76 mm +/- 0.5 mm. The length of the core is equal to the width of the web. |
| Splices | Butt type made with 25 mm pressure sensitive tape. |
| Reel Outer Diamter | 250 +/- 10 mm for slit material. 400 +/- 10 for Jumbos. |
| Reel Wander | Within +/- 1 mm |
| reel/ Web Width | Plain : 45 mm to 800 mm with a tolerance of +/- 0.5 mm. Printed: 45 mm to 600 mm with a tolerance of +/- 0.5 mm. |
| joints Per Reel | Maximum 2. Average less than 1. |
| Pin Holes | Nil. |
| Identification | Each reel shall be identified with a sticker with Reel number, Specification, Net weight, Gross weight, Operator name & Date manufacture. | |
| Packing | Pharma foils are packed in cardboard carton. Relevant makings are provided on each outer Package. | |
| Recommended Operating Conditions | Sealing temperature | 130 to 150 deg. C |
| Sealing pressure | 2.8 to 5.6 kg/sq. cm or 40 to 80 lbs/sq. Inch | |
| Dwell time | 0.25 to 0.5 sec. | |
| Covering Area of 1 Kg finished Material (Nominal) | Gauge & Temper Foil | Covering area in sq. mts/kg with 150 Gauge Polyethylene lamination |
| 0.25 (soft) 0.03 (soft) 0.04 (soft) | 9.78 8.64 7.00 | |
| Test Certificates | Test certificates giving the actual observed values of different parameters will accompany the supplies. | |
Table Showing Thickness Tolerances of Foil
| Foil Gauge | Thickness ( mm ) | GSM | ||||
| Min. (-8%) | Nominal | Max. (+8%) | Min. (-8%) | Nominal | Max. (+8%) | |
| 0.025 mm | 0.023 | 0.025 | 0.027 | 62.33 | 67.75 | 73.17 |
| 0.03 mm | 0.028 | 0.030 | 0.032 | 74.80 | 81.30 | 87.80 |
| 0.04 mm | 0.037 | 0.040 | 0.043 | 99.73 | 108.4 | 117.07 |
Thickness Tolerance of Polyethylene
| Poly Gauge | Thickness ( mm ) | GSM | ||||
| Min. (-15%) | Nominal | Max. (+15%) | Min. (-15%) | Nominal | Max. (+15%) | |
| 150 | 0.0319 | 0.0375 | 0.0431 | 29.23 | 34.39 | 39.55 |
| 180 | 0.0383 | 0.045 | 0.0518 | 35.08 | 41.27 | 47.46 |
| 200 | 0.0425 | 0.05 | 0.0575 | 38.97 | 45.85 | 52.73 |
As a renowned Manufacturer and Supplier of Aluminum Lidding Foil in Kolkata, we ensure to deliver high quality Aluminum Lidding Foil to our customers. Our Aluminium Lidding Foil is appropriate for sealing to PVC (Polyvinyl Chloride), PP (Polypropylene), PET (Polyethyleneterphthalate), PE (Polyethylene), HDPE (High Density Polyethylene), PS (Polystyrene). Our Aluminium Lidding Foil is made in accordance with the mentioned specifications of the client. We make sure that Aluminium Lidding Foil, provided by us, is made with soft and fully annealed Aluminium alloy AA-8011 that conforms to Aluminium Association specification.
Specifications
| Std Foil Gauge Options | Tolerance ( +/-8% ) |
|---|---|
| 0.03 mm | +/-0.0024 mm |
| 0.038 mm | +/-0.00304 mm |
| 0.04 mm | +/-0.0032 mm |
| Tub Material | Sealant Layer | Coating GSM/Film Thickness |
|---|---|---|
| PS | Lacquer | 6-8 +/- 1GSM |
| PVC | Lacquer | 6-8 +/- 1GSM |
| PP | Lacquer | 6.8 +/- 1GSM |
| PET | Lacquer | 6-8 +/- 1GSM |
| PE | Film | 125-150 +/- 15% Gauge |
| HDPE | Film | 125-150 +/- 15% Gauge |
| Configuration | Lidding foils are available in slit reel form or punched disc ( precut ) form. |
| Embossing | The punched discs are pinhead or Moroco embossed. |
| Core | Material Options : (a) Aluminium (b) MS (c) Card Board Core I.D. : Aluminium and MS ; 76 mm +/- 0.5 mm or 152 mm +/- 1mm Card Board : 76 mm +/- 0.5mm |
| Reel Size | Reels are delivered with an O.D. of 400 +/- 10 mm maximum or as specified by the customer. |
| Identification | Each reel is identified with a ticket having reel number, specification, operator number and manufacturing date. |
| Packing | Packed in cardboard carton. For export, the reels are packed in wooden crate/box. Relevant markings are provided on each outer package. |
| Test Certificates | Test certificates giving the actual observed values of different parameters will accompany the supplies. |
