Dual Line Lubrication System that we offer is well tested and therefore, is the perfect option on which buyers can easily rely. We are reckoned as one of the reputed Manufacturers and Suppliers of Dual Line Lubrication System. Manufactured under the strict vigilance of experts, our Lubrication System is known for its longer functional life. Tested using the latest techniques, our Lubrication System is free from all kinds of defects.

Principle of operation : Two parallel lines run from pump to control valves and from control valves to metering devices and then to bearing points. End of line pressure switch gives signal to change over the line and thus continuous operation is ensured.

Construction & operationA single outlet pump, 4/2 way direction control valve, metering devices, end of line pressure switches etc. are important parts of the system. In this system, lubricant is supplied from central pump to control valve, which further supplies it to the main lines and ultimately to bearings. When pump os started, one of the main line gets charged, it delivers required quantity of lubricant to bearings and at that time other main line acts as a relief line. When end if line pressure switch sends signal to changeover the line (i.e. half of the total number of lubrication points are covered.) After getting signal from end of line pressure switch, the changeover valve operates and the other main line gets charged and remaining half number of lubrication points gets lubricated. This ensures one complete cycle. Advantages of this system is that the pump used is high volume, high pressure type and number of bearings can be centralised is large (up to 1000 points).

Applications

Sugarcane Crushing Mills, Steel Rolling Mills, Metal Processing Machines, Power Plant Conveyers and Grate Coolers.

High Pressure Motorised Grease Pump can be used as a central lubrication pump for oil or grease lubrication. It is used with single line progressive as well as dual line system. We are enlisted among the reputed Manufacturers and Suppliers of Motorized Pump. It can be provided with unit of filter, pressure gauge, safety valve and excess pressure switch or without the unit. Additional two ports are provided with our Motorized Pump, one for refilling oil or grease and other for return line connection which is required in case of dual line system.

Technical Specification

• No. of Outlets upto 2
• Max Delivery Pressure 450 bar
• Output/hour - 6000 CC, 8000 CC, 10000 CC, 14000 CC, 18000 CC
• Reservior capacity – 30/60/100 Ltrs

Drive Motorized with worm gear reduction assembly or with helical gear reduction box Lubricant any oil & grease upto NLGI 2

Optional Features

Pressure Relief Valve, Pressure Guage, Low Level Switch, Pressure Plate with tell tale rod or Stirr Assembly, Excess Pressure Switch assembly.

Accessories

• Electrical Control Panel for Automatic operation
• High Pressure Hydraulic Fittings and Seamless Pipes

We make available Hydraulically Operated Direction Control Valve in different models with flow rate 6000 & 14000 CC/hour. Change over pressure is set at approx. 40 bars, which is higher than actual system operating pressure. It comes with adjustable change over pressure 350 bar Max and 80 bar Min. It finds extensive usage in dual line centralized lubrication system. Hydraulically Operated Direction Control Valve can be monitored by indicator pin that provides signal after each cycle to start and stop the pump.

We are named among the renowned Manufacturers and Suppliers of Grease Spray System. In this system, special lubricant is pumped with the help of motorized or pneumatic pump which is then, supplied to progressive metering device through unit of filter and safety valve. Our Grease Spray System is well tested and thus, buying it from us will be the safest option for the buyers.

Mainly two types of spray nozzles are used in this system :

• Monitored : It is monitored by Limit or Proximity switch. It can be operated by progressive dosing of lubricant. The nozzle doesn’t operate unless air and lubricant both are available and at right pressure.
• Unmonitored : In this system lubricant is monitored through limit switch and air is monitored through pressure switch installed after the last nozzle. In this nozzle, spray of specific size is achieved by spraying after mixing of Air & Lubricant.

Application : Open Gear Drives of Cement Mill, Raw Mill, Coal Mill & Kilns & Chain Conveyers.

We are an experienced name, which is engaged in manufacturing and supplying Two Line Dose Feeder. The outlets of our Two Line Dose Feeder are connected parallel. Moreover, the outlet ports are connected to lubrication points by means of tubing. The functioning of entire equipment can be noticed by the movement of indicating pin. We make available Model TLDF 2, 4, 6, 8 and 10 Outlet with respect to output in CC like 2.3 & 5 CC/outlet/cycle.

Electrically Operated Direction Control Valve finds extensive usage in dual line centralized lubrication system. It changes over pressure line and return line alternatively after completing one half cycle. Our Electrically Operated Direction Control Valve comes with a maximum flow rate of 21000 CC/hour and maximum operating pressure 400 kg/cm². It comprises of 24 VDC motor, eccentric cam, bearing, C bracket with plunger etc.

Barrel Mounted Motorized Grease Transfer Pump that we offer comes with drum cover, SS filter gauge, pressure relief valve and pressure gauge (0-350kg/cm2). It is suitable for 180 kgs standard grease barrel. We are counted among the top Manufacturers and Suppliers of Motorized Grease Transfer Pump. The manufacturing of our Motorized Grease Transfer Pump is done using the latest techniques under the strict vigilance of experts.

Our company is an eminent name, which is counted among the top Manufacturers and Suppliers of Progressive Distributor. One can use it as primary as well as secondary distributor. The input quantity of lubricant is divided as per the outlet ports combinations in Progressive Distributor. The best thing about this distributor is that it works on progressive principle according to which, no lubricant goes to next outlet unless metered quantity of lubricant is delivered from previous outlet. We make available Progressive Distributor in Model 2, 4, 6, 8, 10 & 12 outlets with respect to output in CC from 0.2 CC to 0.5 CC/outlet/cycle. All the models of Progressive Distributor are equipped with an indicator pin which moves to and fro in one cycle.

High Pressure Multioutlet Grease Pump that we offer comes with individual output adjustment. This pump can be used for covering lubrication points. We are named among the renowned Manufacturers and Suppliers of Grease Pump. The manufacturing of our Grease Pump is done using highly advanced techniques under the strict vigilance of experts. One can obtain the Grease Pump from us at a very reasonable price.

Technical Specifications

• No. of Outlets upto 30
• Max Delivery Pressure 350 bar
• Adjustable discharge 0.05 CC – 0.25 CC/Stroke/Outlet
• Reservior capacity – 5/10/15/30 Ltrs

Drive Motorized with worm gear reduction assembly Lubricant any oil & grease upto NLGI 2

Optional features : Pressure Relief Valve, Pressure Guage, Low Level Switch, PressurePlate with tell tale rod.

AccessoriesControl panel for intermittent operation High Pressure Hydraulic Fittings and Seamless Pipes

ApplicationsMedium and Large size Presses, Earthmoving Equipments, Screw Conveyers, Punching Presses, Mixing Mills, Crushers, and Turbines etc.

Oil Circulation System that we offer comes with all necessary instruments that are installed at appropriate location for proper measuring of pressure, temperature, level and flow related data. Enough redundancy is built inside the system so that it requires less maintenance. It is perfect for dusty areas as the system is fully enclosed. We can customize Oil Circulation System as per the requirements specified by the buyers.

Flow Range : 0.5 LPM to 500 LPM

Dual Line Lubrication System that we offer is well tested and therefore, is the perfect option on which buyers can easily rely. We are reckoned as one of the reputed Manufacturers and Suppliers of Dual Line Lubrication System. Manufactured under the strict vigilance of experts, our Lubrication System is known for its longer functional life. Tested using the latest techniques, our Lubrication System is free from all kinds of defects.

Principle of operation : Two parallel lines run from pump to control valves and from control valves to metering devices and then to bearing points. End of line pressure switch gives signal to change over the line and thus continuous operation is ensured.

Construction & operationA single outlet pump, 4/2 way direction control valve, metering devices, end of line pressure switches etc. are important parts of the system. In this system, lubricant is supplied from central pump to control valve, which further supplies it to the main lines and ultimately to bearings. When pump os started, one of the main line gets charged, it delivers required quantity of lubricant to bearings and at that time other main line acts as a relief line. When end if line pressure switch sends signal to changeover the line (i.e. half of the total number of lubrication points are covered.) After getting signal from end of line pressure switch, the changeover valve operates and the other main line gets charged and remaining half number of lubrication points gets lubricated. This ensures one complete cycle. Advantages of this system is that the pump used is high volume, high pressure type and number of bearings can be centralised is large (up to 1000 points).

Applications

Sugarcane Crushing Mills, Steel Rolling Mills, Metal Processing Machines, Power Plant Conveyers and Grate Coolers.

High Pressure Motorised Grease Pump can be used as a central lubrication pump for oil or grease lubrication. It is used with single line progressive as well as dual line system. We are enlisted among the reputed Manufacturers and Suppliers of Motorized Pump. It can be provided with unit of filter, pressure gauge, safety valve and excess pressure switch or without the unit. Additional two ports are provided with our Motorized Pump, one for refilling oil or grease and other for return line connection which is required in case of dual line system.

Technical Specification

• No. of Outlets upto 2
• Max Delivery Pressure 450 bar
• Output/hour - 6000 CC, 8000 CC, 10000 CC, 14000 CC, 18000 CC
• Reservior capacity – 30/60/100 Ltrs

Drive Motorized with worm gear reduction assembly or with helical gear reduction box Lubricant any oil & grease upto NLGI 2

Optional Features

Pressure Relief Valve, Pressure Guage, Low Level Switch, Pressure Plate with tell tale rod or Stirr Assembly, Excess Pressure Switch assembly.

Accessories

• Electrical Control Panel for Automatic operation
• High Pressure Hydraulic Fittings and Seamless Pipes

We make available Hydraulically Operated Direction Control Valve in different models with flow rate 6000 & 14000 CC/hour. Change over pressure is set at approx. 40 bars, which is higher than actual system operating pressure. It comes with adjustable change over pressure 350 bar Max and 80 bar Min. It finds extensive usage in dual line centralized lubrication system. Hydraulically Operated Direction Control Valve can be monitored by indicator pin that provides signal after each cycle to start and stop the pump.

We are named among the renowned Manufacturers and Suppliers of Grease Spray System. In this system, special lubricant is pumped with the help of motorized or pneumatic pump which is then, supplied to progressive metering device through unit of filter and safety valve. Our Grease Spray System is well tested and thus, buying it from us will be the safest option for the buyers.

Mainly two types of spray nozzles are used in this system :

• Monitored : It is monitored by Limit or Proximity switch. It can be operated by progressive dosing of lubricant. The nozzle doesn’t operate unless air and lubricant both are available and at right pressure.
• Unmonitored : In this system lubricant is monitored through limit switch and air is monitored through pressure switch installed after the last nozzle. In this nozzle, spray of specific size is achieved by spraying after mixing of Air & Lubricant.

Application : Open Gear Drives of Cement Mill, Raw Mill, Coal Mill & Kilns & Chain Conveyers.

We are an experienced name, which is engaged in manufacturing and supplying Two Line Dose Feeder. The outlets of our Two Line Dose Feeder are connected parallel. Moreover, the outlet ports are connected to lubrication points by means of tubing. The functioning of entire equipment can be noticed by the movement of indicating pin. We make available Model TLDF 2, 4, 6, 8 and 10 Outlet with respect to output in CC like 2.3 & 5 CC/outlet/cycle.

Electrically Operated Direction Control Valve finds extensive usage in dual line centralized lubrication system. It changes over pressure line and return line alternatively after completing one half cycle. Our Electrically Operated Direction Control Valve comes with a maximum flow rate of 21000 CC/hour and maximum operating pressure 400 kg/cm². It comprises of 24 VDC motor, eccentric cam, bearing, C bracket with plunger etc.

Barrel Mounted Motorized Grease Transfer Pump that we offer comes with drum cover, SS filter gauge, pressure relief valve and pressure gauge (0-350kg/cm2). It is suitable for 180 kgs standard grease barrel. We are counted among the top Manufacturers and Suppliers of Motorized Grease Transfer Pump. The manufacturing of our Motorized Grease Transfer Pump is done using the latest techniques under the strict vigilance of experts.

Our company is an eminent name, which is counted among the top Manufacturers and Suppliers of Progressive Distributor. One can use it as primary as well as secondary distributor. The input quantity of lubricant is divided as per the outlet ports combinations in Progressive Distributor. The best thing about this distributor is that it works on progressive principle according to which, no lubricant goes to next outlet unless metered quantity of lubricant is delivered from previous outlet. We make available Progressive Distributor in Model 2, 4, 6, 8, 10 & 12 outlets with respect to output in CC from 0.2 CC to 0.5 CC/outlet/cycle. All the models of Progressive Distributor are equipped with an indicator pin which moves to and fro in one cycle.

High Pressure Multioutlet Grease Pump that we offer comes with individual output adjustment. This pump can be used for covering lubrication points. We are named among the renowned Manufacturers and Suppliers of Grease Pump. The manufacturing of our Grease Pump is done using highly advanced techniques under the strict vigilance of experts. One can obtain the Grease Pump from us at a very reasonable price.

Technical Specifications

• No. of Outlets upto 30
• Max Delivery Pressure 350 bar
• Adjustable discharge 0.05 CC – 0.25 CC/Stroke/Outlet
• Reservior capacity – 5/10/15/30 Ltrs

Drive Motorized with worm gear reduction assembly Lubricant any oil & grease upto NLGI 2

Optional features : Pressure Relief Valve, Pressure Guage, Low Level Switch, PressurePlate with tell tale rod.

AccessoriesControl panel for intermittent operation High Pressure Hydraulic Fittings and Seamless Pipes

ApplicationsMedium and Large size Presses, Earthmoving Equipments, Screw Conveyers, Punching Presses, Mixing Mills, Crushers, and Turbines etc.

Oil Circulation System that we offer comes with all necessary instruments that are installed at appropriate location for proper measuring of pressure, temperature, level and flow related data. Enough redundancy is built inside the system so that it requires less maintenance. It is perfect for dusty areas as the system is fully enclosed. We can customize Oil Circulation System as per the requirements specified by the buyers.

Flow Range : 0.5 LPM to 500 LPM