When a VFD starts a motor, it initially applies a low frequency and voltage to the motor. The starting frequency is typically 2 Hz or less. Starting at such a low frequency avoids the high inrush current that occurs when a motor is started by simply applying the utility (mains) voltage by turning on a switch. When VFD starts, the applied frequency and voltage are increased at a controlled rate or ramped up to accelerate the load without drawing excessive current.

This starting method typically allows a motor to develop 150% of its rated torque while drawing only 50% of its rated current. When a motor is simply switched on at full voltage, it initially draws at least 300% of its rated current while producing less than 50% of its rated torque. As the load accelerates, the available torque usually drops a little and then rises to a peak while the current remains very high until the motor approaches full speed.

A VFD can be adjusted to produce a steady 150% starting torque from standstill right up to full speed while drawing only 50% current.

Also we are Manufacturing Explosion proof panels are used in hazardous area in which an explosive atmosphere is present. We offer fully customized explosion proof panels for distribution and controls using a variety of explosion proof and increased safety enclosures and Terminal / Junction boxes complained to zone classification, Chemical, Gas groups and temperature ratings.

We also offer complete range of explosion proof components.

We manufacture a wide range of electrical control products ranging from small control panels, through to wall mounted control panels, to lager floor standing suites.

All our products are manufactured by trained personnel. This coupled with a stringent policy of Quality testing at all levels of production processes ensures that the product manufactured is free from defects when delivered.

We offer a service to fast track panel build manufacture, this is to accommodate an industry that is always altering, especially your expectations on delivery, which can change at a moment's notice.

We design and manufactureMCC's (Motor Control Centers).It is the combination of motor starters , feeder units and inter locking relays arranged in modular capacities in DOL and STAR-DELTA with digital or analog metering and control elements.

Motor control centers are used to distribute the power through the panels to the different motor loads located at various parts of the factory / system from one place through the motor starter fitted in the panel of required rating with full protection. The motors can be started from remote positions also.

An informative and transparent method of function display and control that provides the operator with a clear overview of the implemented functions and it is important for the reliable control and monitoring of technical processing. We offer customized display panels with the mosaic tile technology.

We are Design, Manufacture and supply of distribution panel boards for Residential / commercial buildings energy & Power, industry, Infrastructure, construction, commercial purposes, etc. with low voltage switch gear, building automation also industrial Automation and control systems. Our products are made in accordance with the Indian Standard and local standards.

A distribution boards is component of electrically supply systems which divides an electrified power feed into subsidiary circuits.

We offer power distribution boards that are fully designed, tested, wired and assembled with various electric switchgear elements. Our Power Distribution Board's can provide up to 6300 Amperes incoming power distribution with single or multiple incomings with fixed or draw-out versions. These distribution boards use ACB's, MCCB's, ELCB's, and MCB's as power elements along with digital or analog metering and control elements.

Panel enclosures are made of GI sheet, MS Sheet and SS Sheet of various gauges with epoxy powder coated, stainless with different grades, aluminum

When a VFD starts a motor, it initially applies a low frequency and voltage to the motor. The starting frequency is typically 2 Hz or less. Starting at such a low frequency avoids the high inrush current that occurs when a motor is started by simply applying the utility (mains) voltage by turning on a switch. When VFD starts, the applied frequency and voltage are increased at a controlled rate or ramped up to accelerate the load without drawing excessive current.

This starting method typically allows a motor to develop 150% of its rated torque while drawing only 50% of its rated current. When a motor is simply switched on at full voltage, it initially draws at least 300% of its rated current while producing less than 50% of its rated torque. As the load accelerates, the available torque usually drops a little and then rises to a peak while the current remains very high until the motor approaches full speed.

A VFD can be adjusted to produce a steady 150% starting torque from standstill right up to full speed while drawing only 50% current.

Also we are Manufacturing Explosion proof panels are used in hazardous area in which an explosive atmosphere is present. We offer fully customized explosion proof panels for distribution and controls using a variety of explosion proof and increased safety enclosures and Terminal / Junction boxes complained to zone classification, Chemical, Gas groups and temperature ratings.

We also offer complete range of explosion proof components.

We manufacture a wide range of electrical control products ranging from small control panels, through to wall mounted control panels, to lager floor standing suites.

All our products are manufactured by trained personnel. This coupled with a stringent policy of Quality testing at all levels of production processes ensures that the product manufactured is free from defects when delivered.

We offer a service to fast track panel build manufacture, this is to accommodate an industry that is always altering, especially your expectations on delivery, which can change at a moment's notice.

We design and manufactureMCC's (Motor Control Centers).It is the combination of motor starters , feeder units and inter locking relays arranged in modular capacities in DOL and STAR-DELTA with digital or analog metering and control elements.

Motor control centers are used to distribute the power through the panels to the different motor loads located at various parts of the factory / system from one place through the motor starter fitted in the panel of required rating with full protection. The motors can be started from remote positions also.

An informative and transparent method of function display and control that provides the operator with a clear overview of the implemented functions and it is important for the reliable control and monitoring of technical processing. We offer customized display panels with the mosaic tile technology.

We are Design, Manufacture and supply of distribution panel boards for Residential / commercial buildings energy & Power, industry, Infrastructure, construction, commercial purposes, etc. with low voltage switch gear, building automation also industrial Automation and control systems. Our products are made in accordance with the Indian Standard and local standards.

A distribution boards is component of electrically supply systems which divides an electrified power feed into subsidiary circuits.

We offer power distribution boards that are fully designed, tested, wired and assembled with various electric switchgear elements. Our Power Distribution Board's can provide up to 6300 Amperes incoming power distribution with single or multiple incomings with fixed or draw-out versions. These distribution boards use ACB's, MCCB's, ELCB's, and MCB's as power elements along with digital or analog metering and control elements.

Panel enclosures are made of GI sheet, MS Sheet and SS Sheet of various gauges with epoxy powder coated, stainless with different grades, aluminum