Rajkot, Gujarat, India
Our Products
Globe Valves are generally available with Plug Type Disc, which is designed to give leak tight seating over a long period of in built wear life. Reliable Globe valves body seat ring is shoulder type, threaded body seat ring which has large taper area that is for ample seating. Two nos. slots are provided on body seat ring, which is for easy removal for servicing at site. Welded type seat ring & Integral seat ring are also available in Reliable Globe Valve. All Globe Valve stem is made from solid one piece construction. The yoke bush of Globe Valve has a long thread engagement for accurate stem alignment. The standard range of Reliable Globe Valve in sizes of up to 24" (600mm)
| Pressure & Temperature Rating |
| Valves manufactured by Reliable Valves shall be furnished in one of the following classes: - PN 20 (class 150)- PN 50 (class 300)- PN 64 (class 400)- PN 100 (class 600)- PN 150 (class 900)- PN 250 (class 1500)- PN 420 (class 2500) |
| Size |
| Reliable Valves manufacture globe valve for 2" to 24" Size |
| Butterfly Valvesare designed and manufactured to have optimal mix of structural stability, flow efficiency and effective seating coupled with advantage of light weight, compact design and ease of operation. Only a quarter turn is needed to fully open or close the valves. Thevalvesare provided with integrally moulded elastomer body liner to provide perfect seating and complete isolation of body material from fluid media to prevent it from any corrosive and abrasive impact of fluid. | |||
| Specifications and Standards | |||
| |||
| Face to Face Dimensions | |||
| BS-5155 PN 10 / PN 16, IS 13095 ( PN 1.0 / 1.6), ISO 5752, MSS SP67, API 609 | |||
| End Connections | |||
| BS- 4504 PN 10 and 16, BS- 1560- Class 125 and 150, ANSI B 16.5 Class 150, ANSI B 16.1 Class 125
|
| Pressure and Temperature Ratings | ||||||||||||||||
|
| Flow Line Gate Valvesare used for well control, flow line control, re-pressuring & cycling services. Reliable Valves manufacture the flow line gate valves with rated working pressures equel to and greater than 13.8 MPa(2000 psi). | ||
| Specifications & Standards | ||
| ||
| Performance Requirement | ||
| Operating cycle requirement for chokes has got two performance requirement levels:- Performance Requirement Level 1 has got 3 operating cycle- Performance Requirement Level 2 has got 200 operating cycle | ||
| Pressure & Temperature Rating | ||
| Pressure & temperature rating shall be as perAPI-6Afrom 13.8 MPa (2000 psi) to 138.0 MPa [20000 psi]. The temperature rating is classified as K, L, N, P, S, T, U, V with minimum -60deg centigrade to 121 centigrade. | ||
| Material Class | ||
| The material class has got various services for general & sour service from AA, BB, CC, DD, EE, FF, HH. The minimum material requirement for body, bonnet, end & outlet connections with respect to pressure controlling parts, stems & mandrel hangers | ||
| Size | ||
| Reliable Valves manufactures theFlow Line Gate Valvefrom 2to 7 | ||
| Features: |
| - Quarter-turn- Large protected metal-to-metal seats- On-line maintenance facility |
| Valve Type & Configuration |
| Taper Plug Valves with flange and wending ends are manufacturers at Reliable Valves. Taper Plug Valves shall have a cylindrical or conical plug that rotate about an axis perpendicular to the direction the flow, Different types of taper plug valves are configured as per API-6D such as short pattern, regular pattern, venture pattern & full bore. |
| Size |
| Reliable Valves manufacture Taper Plug Valve for 2" to 36" Size |
Reliable Valves, Check Valves[NRV] are Swing Type with bolted cover construction. The one piece disc construction is securely fastened to the hinge by means of a lock nut & pin. The Disc is free to rotating type to avoid any other wear. The hinge pin offers excellent wear resistance properties.
Swing Check valves also can be supplied with Titling disc design, Dash pot arrangement and outside lever & weight design for use where control of the disc as desired.
Reliable Valves also offer P.T.F.E. (PFA / FEP) Lined Ball Type/Y Type & Rubber Lined Flap Type Check Valves for high corrosive application.
| Valve Type & Configuration |
| Swing check valvesshall have a disc which response automatically to block fluid in one direction. Swing check valve can be of Wafer, Axial Flow & Lift type. |
| Pressure & Temperature Rating |
| Valves manufactured by Reliable Valves shall be furnished in one of the following classes: |
| Size |
| Reliable Valves manufactureSwing check valvesfor 2" to 36" Size |
| Reliable Valvesmanufactures heavy duty series of bolted bonnetSteel Gate Valvesfor all industrial applications ware orrosion & erosion & other service conditions need full pot openings, heavy valve sections & large stem diameters. |
| Pressure & Temperature Rating |
| Valves manufactured by Reliable Valves shall be furnished in one of the following classes: |
| Pressure-temperature rate is for above class rated valves shall be in accordance to ASME-B 16.34/EN 1092-1, Other than shall be determine for a material properties in accordance with the applicable design standard. |
| Size |
| Reliable Valves manufacture conduit gate valvefor 1" to 24" Size |
| Conduit gate valvesshall have a clapper / disc / gate that moves in a plane perpendicular to the direction of flow. The gate can be consultations of one Piece for slab conduit gate valves or two or more pieces for expanding gate valves.Conduit gate valvesshall be provided with a back seat or secondary stem sealing feature in addition to primary stem seal. Full opening throughconduit valvesshall have a circular bore in the gate that allows a sphere to pass with a nominal size not less than " nominal diameter. Reduce opening through conduit gate valve shall have a circular bore in the gate that allows a sphere to pass with a nominal size not less than 10" nominal diameter, Unless other wise specified by customer. Reduce opening valves with a non circular opening through the gate shall be supplied with a minimum opening as agreed by customer. |
| Pressure &TemperatureRating |
| Valves manufacturedbyReliable Valvesshall be furnished in one of the following classes: |
| Size |
| Reliable Valves manufacture conduit gate valvesfor 2" to 36" Size |
