Reliable Traders

Gole Colony, Nashik, Maharashtra

ALMONARDpresent to its valued customers, entirely a diffrent type of water namely Instant Water Heater which is highly efficient and users friendly. It provides hassle free operation espeacially in the event of long unscheduled electric power cut. Since LPG is chaper than electricity, using Gas Water Heater is more economical than Electric Water Heater.

The water heater must be installed in a place outside the bathroom and with good ventilation. Proper exhaust fan should be installed to drain the smoke outside.

ALMONARDpresents new range of water heaters with attractive colour designs on outer casing. This designer series will enhance the decor of your exclusive bathroom & with .ABS plastic body (ESTEEM series Water Heater) which completely eliminates possibility of any rust or corrosion. Thus ensuring longer water heater life. PUF insulation is used to reduce the power consumption by up to 30%.

ALMONARDwater heaters are manufactured under the technical expertise, non compromising quality control and in accordance to the conditions laid down by Bureau of Indian Standards and confirms to IS:2082 (part-1) for Storage water hater, IS: 8978 for Instant water heater

OUTER CASING : The Outer Body is made of Mild Steel sheet finished with anti-corrosive powder coating/ABS plastic outer body.

OUTER CASING : The Outer Body is made of Mild Steel sheet finished with anti-corrosive powder coating/ABS plastic outer body.

ISI marked Snap-action stem type Thermostat (safety device) with a temperature range between 30C to 75C, preset at 65C is fitted. This device automatically controls the water heating beyond the safe/required limits.

To ensure further safety in case of Thermostat failure or dry heating of Element, another special Safety device-THERMAL CUTOUT is fitted. This device automatically cuts off Electric Supply when the temperature exceeds 90C. (The red indicator lamp starts glowing immediately).

Pressure relieving valve is fitted at the inlet pipe of the water heater to check & relive excess water pressure, if it exceeds 30N/cm2(50psi) i.e.3.5 kg/cm.

Space gap between the inner Copper container and the Outer Mild Steel casing is insulated with best quality vermin proof glass wool/puf which ensures minimum heat loss resulting in saving of time and electricity consumption.

This is an additional when temperature reaches at about 99 in case of thermostat failure and release the hotwater safety. It can easily be replaced by opening inspection cover.