493K is a high temperature slipring that attaches permanently to the arm of your rotomoulding machine. It continuously measures mould temperature, 24/7. 493K measures the exact temperatures of up to two moulds on all arms simultaneously (up to 8 temperatures on a four arm machine), giving an overview of the process for the purposes of optimisation of production scheduling, diagnostics or R&D. 493K can be installed on your Reinhardt machine. 493K can come pre-installed on your new Reinhardt Roto machine as per client requirements.

Advantages With 493K Heat Measuring And Controlling Systems :

• Optimise cycle times
• Troubleshoot scrap problems
• Identify machine faults and inefficiencies
• Balance spiders
• Improve process control and efficiency
• Adjust for changes in ambient conditions
• Reduce new product set-up times

• pallmann pulverizing systems for plastic operate on a special processing principle. Granulated feed material is fed into the mill by means of suitable dosing systems. A suction system optimally designed for this application draws the ground material out of the mill. Different screening systems are used to achieve the desired powder qualities. Coarse material from the screen is reintroduced into the mill via a closed-loop system. The finished product is weighed in bags, filled into containers or conveyed to downstream processes and silo systems, depending on the requirements. Standard systems for installation on the production floor are available. An individual installation in multi-story buildings is possible at any time depending on the local conditions.

  trend setting technology
  the steadily increasing demand for powders of plastic, rubber, or minerals of any kind as well as the constantly expanding quality requirements with regards to flow ability, bulk density, particle size distribution and grain structure, call for pulverizing systems of most modern technology. Pallmann offers complete standard and custom systems developed and proven in practical applications.for fully automatic round the clock operation, pallmann offers pulverizing systems with specially developed controls. Sensors for temperature, pressure and power consumption register and control the system according to preset parameters.
  
  quality powders in any fineness
  leap ahead through innovation
  sophisticated constructions, well-proven solutions
  
  different pulverizing systems are used for different materials such as hdpe, mdpe, lldpe, ldpe, pp, pvc, abs, pa, pes, etc. The "original pallmann" polygrinder type pkm covers the most broad material spectrum due to the large variety of different key segments available.
  
  constructive and process-technological characteristics are:
  
  

  • grinding path made of wear resistant, technological optimized key segments
  • exact, central grinding gap adjustment
  • housing design for optimized air cooling
  • broad application field
  • for steady unchanging tasks, pallmann uses disc mills, pin mills, turbo mills, knife mills, or hammer mills specially optimized for the customer's requirements.
  • economical and cost effective
  • low specific power consumption
  • powder quality according to specification

we offer reinhardt roto machines. Christened as the f1 of the roto molding industry, at reinhardt, quality speaks for itself. In line with this philosophy, machines fabricated and assembled in india have their critical parts imported from germany. Manufactured under strict tolerances on cnc equipment and guidance from ernst reinhardt gmbh, every machine is tagged with the brand name "reinhardt" and is well known for its trouble free operation lasting from generation to generation. Index shuttle type rsx ( new generation high speed ) fixed turret - type rso, 3 or 4 arms machines independent arm type rsu, 3 arms 5 stations

• index shuttle type rsx ( new generation high speed )
• fixed turret - type rso, 3 or 4 arms machines
• independent arm type rsu, 3 arms 5 stations

"Think about tomorrow today for the customer" is the motto at Reinhardt. And that's exactly why we have always valued innovative solutions. It is an open secret that the future needs the past and that innovation is synonymous with competitive ability and advantage. At Reinhardt, tradition and innovation combine to produce measurable success for our customers both nationally and internationally.

Advantages With Reinhardt Index Shuttle RSX - New Generation Machines

• Multiple cooling cum load unload stations.
• Compatible with new generation temperature systems like templogger/493K.
• Probably the fastest machines in the world.
• Capable of taking any arm out of turn into the oven.
• Flexible and adaptable to a variety of products at the same time.

Gas/Diesel/Duel Heated Sintering Oven
The oven is in solid self-supporting sheet steel, with high quality 150/200mm thick insulation.The oven has extremely well designed expansion joints to take care of expansion during heating of the oven upto 400 degrees centigrade.The combustion room is made of steel with connection flage for the burner and is made from heat resistant steel. The fully automated gas or diesel burner as per customer requirement is with modulating control mode, with installed ignition electrode and UV supervision device complete with safety.

Multiple Cooling Cum Load Unload Station
A complete cooling cycle is programmed with supply air, spray water and mist water as per requirement of a given production in any combination for a desired time. You can also programme alarms for steps of secondary process. You have four cooling stations out of which 3 can be used as cooling cum load/unload stations.

Mould Carriers Offset And Straight
The standard combination is of two straight ARM and one offset ARM for a three ARM machine, but can also be as per customer requirement. The choice of straight or offset ARM depends on the product that a customer wants to rotomould. The ARM of Reinhardt machines are robust compared to those available in the market and require the minimal maintenance. Arms can be ordered with or without internal Air/Gas lines. One can position the ARM for pre-heating position and/or second charge position at the heating station. The ARM is positioned at the cooling station as the cycle ends so that it is in the correct position at the de moulding station. Also the ARM can be manually inched at the de moulding station if required.

Operator Panel
Operator Panel is user friendly with only a few push buttons, all the operator has to do is keep pushing the flashing button for the cycle to start in auto mode and then he is free to do other work. The panel also houses a Desk PC or a touch screen industrial PC which can be used to feed infinite recipes and get management reports on production. You can also store and recall detailed recipes for cooking and cooling to ensure a consistent production. The management can also see down time or idle time of the machine every day, week, or month. Time loss can be tabulated operator or shift wise to execute a point system.

Control Panel
All machines are equipped with PLC having sequential controls and numerous safety interlocks. Control panel includes devices only from reputed international European or Japanese brands which are available locally in your country. All electricals in the machine are CE marked and made to EU standards, panels are built in modular form with soft and hard copies of drawings, programmes and manuals easily available on the PC.

we at reinhardt roto machines maufacture superfine quality sheet metal moulds as per client requirements. With a team of experienced product, industrial designers and cnc machining equipments, we specialise in sheet metal moulds in mild steel and stainless steel ensuring that there is ample radii and tank moulds conform to aunz4766 standards. From lifestyle products to industrial tanks and storage solutions, our moulds manufacturing portfolio serves almost every rotomoulding requirements.

reinhardt mould features

"Think about tomorrow today for the customer" is the motto at Reinhardt. And that's exactly why we have always valued innovative solutions. It is an open secret that the future needs the past and that innovation is synonymous with competitive ability and advantage. At Reinhardt, tradition and innovation combine to produce measurable success for our customers both nationally and internationally.

Advantages With Reinhardt Fixed Turret Machines ( RSO Type ) -

• Works best with similar wall thickness products having similar heating, cooling and demoulding times.
• Generally used in single load and unload stations with 2 cooling stations.
• Fast cooling and heating times.
• The slowest step in the machine is the operator !
• Ready for hook up to internal temperature monitoring systems such as the Templogger.
• Direct profits to moulders -
  
  
  Increased productivity by 30% & Fuel savings of at least 30%
• Reduced emission by 40% for a greener process
• Super fast heating / cooling
• Online support service, 24 x 7
• Low maintenance
• User friendly software support
• Very less time between the end of one cycle and the start of another
• Lowest fuel consumption for every cycle.

Turntable For Fixed Arm Machines And Independent Carriages For Shuttle And Independent Arm Machines
FIXED ARM TURRET MACHINES :The turntable is of welded steel. The movement is over toothed gear by a gear-brake motor of protection class IP54. It has all the three or four AMRS mounted on it. Machines are fast flexible using very robust construction, the best of flexibility and speed.
Fixed Arm Turret Machines are high production machines

Gas/Diesel/Duel Heated Sintering Oven
The oven is in solid self-supporting sheet steel, with high quality 150/200mm thick insulation.The oven has extremely well designed expansion joints to take care of expansion during heating of the oven upto 400 degrees centigrade.The combustion room is made of steel with connection flage for the burner and is made from heat resistant steel. The fully automated gas or diesel burner as per customer requirement is with modulating control mode, with installed ignition electrode and UV supervision device complete with safety.

Multiple Cooling Cum Load Unload Station
The supply air fan for air cooling with casing made of sheet steel, the centrifugal fan-wheel is balanced statically and dynamically and is coupled with the closed three-phase current motors of protection class IP54. A complete cooling cycle is programmed with supply air, exhaust air, spray water and mist water as per requirement of a given production in any combination for a desired time. You can also programme alarms for removal of inserts and breathers.

Mould Carriers Offset And Straight
The standard combination is of two straight ARM and one offset ARM for a three ARM machine, but can also be as per customer requirement. The choice of straight or offset ARM depends on the product that a customer wants to rotomould. The ARM of Reinhardt machines are much robust compared to those of the competitors on the market and require the least possible maintenance. One can position the ARM for pre-heating position and/or second charge position at the heating station. The ARM is positioned at the cooling station as the cycle ends so that it is in the correct position at the de moulding station. Also the ARM can be manually inched at the de moulding station if required.

Operator Panel
Operator Panel is user friendly with only a few push buttons, all the operator has to do is keep pushing the flashing button for the cycle to start in auto mode and then he is free to do other work. The panel also houses a Desk PC or a touch screen industrial PC which can be used to feed infinite recipes and get management reports on production. You can also store and recall detailed recipes for cooking and cooling to ensure a consistent production. The management can also see down time or idle time of the machine every day, week, or month. Time loss can be tabulated operator or shift wise to execute a point system.

Control Panel
All machines are equipped with PLC having sequential controls and numerous safety interlocks. Control panel includes devices only from reputed international European or Japanese brands which are available locally in your country. All electricals in the machine are CE marked and made to EU standards, panels are built in modular form with soft and hard copies of drawings, programmes and manuals easily available on the PC.

"Think about tomorrow today for the customer" is the motto at Reinhardt. And that's exactly why we have always valued innovative solutions. It is an open secret that the future needs the past and that innovation is synonymous with competitive ability and advantage. At Reinhardt, tradition and innovation combine to produce measurable success for our customers both nationally and internationally.Flexible machines are best suited for slow processing as required in some typical double walled P-foamed products. Load/Unload stations can be at two points only, similarly, cooling can be at two points. Arms are reversible upto ane stations.

Advantages With Reinhardt Independent Arm Machines ( RSU Type )

• Probably the fastest machines in the world.
• Capable of taking any arm out of turn into the oven.
• Flexible and adaptable to a variety of products at the same time.
• Fast cooling and heating times.
• The slowest step in the machine is the operator !
• Ready for hook up to internal temperature monitoring systems such as the Templogger.
• Higher speed with unique product mix on each arm
• Direct profits to molders -
  
  
  Increased productivity by 30% & Fuel savings of at least 30%
• Reduced emission by 40% for a greener process
• Super fast heating / cooling
• Online support service, 24 x 7
• Low maintenance
• User friendly software support
• Very less time between the end of one cycle and the start of another
• Lowest fuel consumption for every cycle

Turntable For Fixed Arm Machines And Independent Carriages For Shuttle And Independent Arm Machines
INDEPENDENT CARRIAGES :In case of a independent ARM machine, there are three or four independent carriages, one for each ARM. These ARMS move independent of each other and thus these machines are very flexible if there is a diverse range of products and not much experience with the three ARM machines.

Gas/Diesel/Duel Heated Sintering Oven
The oven is in solid self-supporting sheet steel, with high quality 150/200mm thick insulation.The oven has extremely well designed expansion joints to take care of expansion during heating of the oven upto 400 degrees centigrade.The combustion room is made of steel with connection flage for the burner and is made from heat resistant steel. The fully automated gas or diesel burner as per customer requirement is with modulating control mode, with installed ignition electrode and UV supervision device complete with safety.

Multiple Cooling Cum Load Unload Station
The supply air fan for air cooling with casing made of sheet steel, the centrifugal fan-wheel is balanced statically and dynamically and is coupled with the closed three-phase current motors of protection class IP54 A complete cooling cycle is programmed with supply air, exhaust air, spray water and mist water as per requirement of a given production in any combination for a desired time. You can also programme alarms for removal of inserts and breathers.

Mould Carriers Offset And Straight
The standard combination is of two straight ARM and one offset ARM for a three ARM machine, but can also be as per customer requirement. The choice of straight or offset ARM depends on the product that a customer wants to rotomould. The ARM of Reinhardt machines are much robust compared to those of the competitors on the market and require the least possible maintenance. One can position the ARM for pre-heating position and/or second charge position at the heating station. The ARM is positioned at the cooling station as the cycle ends so that it is in the correct position at the de moulding station. Also the ARM can be manually inched at the de moulding station if required.

Operator Panel
Operator Panel is user friendly with only a few push buttons, all the operator has to do is keep pushing the flashing button for the cycle to start in auto mode and then he is free to do other work. The panel also houses a Desk PC or a touch screen industrial PC which can be used to feed infinite recipes and get management reports on production. You can also store and recall detailed recipes for cooking and cooling to ensure a consistent production. The management can also see down time or idle time of the machine every day, week, or month. Time loss can be tabulated operator or shift wise to execute a point system.

Control Panel
All machines are equipped with PLC having sequential controls and numerous safety interlocks. Control panel includes devices only from reputed international European or Japanese brands which are available locally in your country. All electricals in the machine are CE marked and made to EU standards, panels are built in modular form with soft and hard copies of drawings, programmes and manuals easily available on the PC.

493K is a high temperature slipring that attaches permanently to the arm of your rotomoulding machine. It continuously measures mould temperature, 24/7. 493K measures the exact temperatures of up to two moulds on all arms simultaneously (up to 8 temperatures on a four arm machine), giving an overview of the process for the purposes of optimisation of production scheduling, diagnostics or R&D. 493K can be installed on your Reinhardt machine. 493K can come pre-installed on your new Reinhardt Roto machine as per client requirements.

Advantages With 493K Heat Measuring And Controlling Systems :

• Optimise cycle times
• Troubleshoot scrap problems
• Identify machine faults and inefficiencies
• Balance spiders
• Improve process control and efficiency
• Adjust for changes in ambient conditions
• Reduce new product set-up times

• pallmann pulverizing systems for plastic operate on a special processing principle. Granulated feed material is fed into the mill by means of suitable dosing systems. A suction system optimally designed for this application draws the ground material out of the mill. Different screening systems are used to achieve the desired powder qualities. Coarse material from the screen is reintroduced into the mill via a closed-loop system. The finished product is weighed in bags, filled into containers or conveyed to downstream processes and silo systems, depending on the requirements. Standard systems for installation on the production floor are available. An individual installation in multi-story buildings is possible at any time depending on the local conditions.

  trend setting technology
  the steadily increasing demand for powders of plastic, rubber, or minerals of any kind as well as the constantly expanding quality requirements with regards to flow ability, bulk density, particle size distribution and grain structure, call for pulverizing systems of most modern technology. Pallmann offers complete standard and custom systems developed and proven in practical applications.for fully automatic round the clock operation, pallmann offers pulverizing systems with specially developed controls. Sensors for temperature, pressure and power consumption register and control the system according to preset parameters.
  
  quality powders in any fineness
  leap ahead through innovation
  sophisticated constructions, well-proven solutions
  
  different pulverizing systems are used for different materials such as hdpe, mdpe, lldpe, ldpe, pp, pvc, abs, pa, pes, etc. The "original pallmann" polygrinder type pkm covers the most broad material spectrum due to the large variety of different key segments available.
  
  constructive and process-technological characteristics are:
  
  

  • grinding path made of wear resistant, technological optimized key segments
  • exact, central grinding gap adjustment
  • housing design for optimized air cooling
  • broad application field
  • for steady unchanging tasks, pallmann uses disc mills, pin mills, turbo mills, knife mills, or hammer mills specially optimized for the customer's requirements.
  • economical and cost effective
  • low specific power consumption
  • powder quality according to specification

we offer reinhardt roto machines. Christened as the f1 of the roto molding industry, at reinhardt, quality speaks for itself. In line with this philosophy, machines fabricated and assembled in india have their critical parts imported from germany. Manufactured under strict tolerances on cnc equipment and guidance from ernst reinhardt gmbh, every machine is tagged with the brand name "reinhardt" and is well known for its trouble free operation lasting from generation to generation. Index shuttle type rsx ( new generation high speed ) fixed turret - type rso, 3 or 4 arms machines independent arm type rsu, 3 arms 5 stations

• index shuttle type rsx ( new generation high speed )
• fixed turret - type rso, 3 or 4 arms machines
• independent arm type rsu, 3 arms 5 stations

"Think about tomorrow today for the customer" is the motto at Reinhardt. And that's exactly why we have always valued innovative solutions. It is an open secret that the future needs the past and that innovation is synonymous with competitive ability and advantage. At Reinhardt, tradition and innovation combine to produce measurable success for our customers both nationally and internationally.

Advantages With Reinhardt Index Shuttle RSX - New Generation Machines

• Multiple cooling cum load unload stations.
• Compatible with new generation temperature systems like templogger/493K.
• Probably the fastest machines in the world.
• Capable of taking any arm out of turn into the oven.
• Flexible and adaptable to a variety of products at the same time.

Gas/Diesel/Duel Heated Sintering Oven
The oven is in solid self-supporting sheet steel, with high quality 150/200mm thick insulation.The oven has extremely well designed expansion joints to take care of expansion during heating of the oven upto 400 degrees centigrade.The combustion room is made of steel with connection flage for the burner and is made from heat resistant steel. The fully automated gas or diesel burner as per customer requirement is with modulating control mode, with installed ignition electrode and UV supervision device complete with safety.

Multiple Cooling Cum Load Unload Station
A complete cooling cycle is programmed with supply air, spray water and mist water as per requirement of a given production in any combination for a desired time. You can also programme alarms for steps of secondary process. You have four cooling stations out of which 3 can be used as cooling cum load/unload stations.

Mould Carriers Offset And Straight
The standard combination is of two straight ARM and one offset ARM for a three ARM machine, but can also be as per customer requirement. The choice of straight or offset ARM depends on the product that a customer wants to rotomould. The ARM of Reinhardt machines are robust compared to those available in the market and require the minimal maintenance. Arms can be ordered with or without internal Air/Gas lines. One can position the ARM for pre-heating position and/or second charge position at the heating station. The ARM is positioned at the cooling station as the cycle ends so that it is in the correct position at the de moulding station. Also the ARM can be manually inched at the de moulding station if required.

Operator Panel
Operator Panel is user friendly with only a few push buttons, all the operator has to do is keep pushing the flashing button for the cycle to start in auto mode and then he is free to do other work. The panel also houses a Desk PC or a touch screen industrial PC which can be used to feed infinite recipes and get management reports on production. You can also store and recall detailed recipes for cooking and cooling to ensure a consistent production. The management can also see down time or idle time of the machine every day, week, or month. Time loss can be tabulated operator or shift wise to execute a point system.

Control Panel
All machines are equipped with PLC having sequential controls and numerous safety interlocks. Control panel includes devices only from reputed international European or Japanese brands which are available locally in your country. All electricals in the machine are CE marked and made to EU standards, panels are built in modular form with soft and hard copies of drawings, programmes and manuals easily available on the PC.

we at reinhardt roto machines maufacture superfine quality sheet metal moulds as per client requirements. With a team of experienced product, industrial designers and cnc machining equipments, we specialise in sheet metal moulds in mild steel and stainless steel ensuring that there is ample radii and tank moulds conform to aunz4766 standards. From lifestyle products to industrial tanks and storage solutions, our moulds manufacturing portfolio serves almost every rotomoulding requirements.

reinhardt mould features

"Think about tomorrow today for the customer" is the motto at Reinhardt. And that's exactly why we have always valued innovative solutions. It is an open secret that the future needs the past and that innovation is synonymous with competitive ability and advantage. At Reinhardt, tradition and innovation combine to produce measurable success for our customers both nationally and internationally.

Advantages With Reinhardt Fixed Turret Machines ( RSO Type ) -

• Works best with similar wall thickness products having similar heating, cooling and demoulding times.
• Generally used in single load and unload stations with 2 cooling stations.
• Fast cooling and heating times.
• The slowest step in the machine is the operator !
• Ready for hook up to internal temperature monitoring systems such as the Templogger.
• Direct profits to moulders -
  
  
  Increased productivity by 30% & Fuel savings of at least 30%
• Reduced emission by 40% for a greener process
• Super fast heating / cooling
• Online support service, 24 x 7
• Low maintenance
• User friendly software support
• Very less time between the end of one cycle and the start of another
• Lowest fuel consumption for every cycle.

Turntable For Fixed Arm Machines And Independent Carriages For Shuttle And Independent Arm Machines
FIXED ARM TURRET MACHINES :The turntable is of welded steel. The movement is over toothed gear by a gear-brake motor of protection class IP54. It has all the three or four AMRS mounted on it. Machines are fast flexible using very robust construction, the best of flexibility and speed.
Fixed Arm Turret Machines are high production machines

Gas/Diesel/Duel Heated Sintering Oven
The oven is in solid self-supporting sheet steel, with high quality 150/200mm thick insulation.The oven has extremely well designed expansion joints to take care of expansion during heating of the oven upto 400 degrees centigrade.The combustion room is made of steel with connection flage for the burner and is made from heat resistant steel. The fully automated gas or diesel burner as per customer requirement is with modulating control mode, with installed ignition electrode and UV supervision device complete with safety.

Multiple Cooling Cum Load Unload Station
The supply air fan for air cooling with casing made of sheet steel, the centrifugal fan-wheel is balanced statically and dynamically and is coupled with the closed three-phase current motors of protection class IP54. A complete cooling cycle is programmed with supply air, exhaust air, spray water and mist water as per requirement of a given production in any combination for a desired time. You can also programme alarms for removal of inserts and breathers.

Mould Carriers Offset And Straight
The standard combination is of two straight ARM and one offset ARM for a three ARM machine, but can also be as per customer requirement. The choice of straight or offset ARM depends on the product that a customer wants to rotomould. The ARM of Reinhardt machines are much robust compared to those of the competitors on the market and require the least possible maintenance. One can position the ARM for pre-heating position and/or second charge position at the heating station. The ARM is positioned at the cooling station as the cycle ends so that it is in the correct position at the de moulding station. Also the ARM can be manually inched at the de moulding station if required.

Operator Panel
Operator Panel is user friendly with only a few push buttons, all the operator has to do is keep pushing the flashing button for the cycle to start in auto mode and then he is free to do other work. The panel also houses a Desk PC or a touch screen industrial PC which can be used to feed infinite recipes and get management reports on production. You can also store and recall detailed recipes for cooking and cooling to ensure a consistent production. The management can also see down time or idle time of the machine every day, week, or month. Time loss can be tabulated operator or shift wise to execute a point system.

Control Panel
All machines are equipped with PLC having sequential controls and numerous safety interlocks. Control panel includes devices only from reputed international European or Japanese brands which are available locally in your country. All electricals in the machine are CE marked and made to EU standards, panels are built in modular form with soft and hard copies of drawings, programmes and manuals easily available on the PC.

"Think about tomorrow today for the customer" is the motto at Reinhardt. And that's exactly why we have always valued innovative solutions. It is an open secret that the future needs the past and that innovation is synonymous with competitive ability and advantage. At Reinhardt, tradition and innovation combine to produce measurable success for our customers both nationally and internationally.Flexible machines are best suited for slow processing as required in some typical double walled P-foamed products. Load/Unload stations can be at two points only, similarly, cooling can be at two points. Arms are reversible upto ane stations.

Advantages With Reinhardt Independent Arm Machines ( RSU Type )

• Probably the fastest machines in the world.
• Capable of taking any arm out of turn into the oven.
• Flexible and adaptable to a variety of products at the same time.
• Fast cooling and heating times.
• The slowest step in the machine is the operator !
• Ready for hook up to internal temperature monitoring systems such as the Templogger.
• Higher speed with unique product mix on each arm
• Direct profits to molders -
  
  
  Increased productivity by 30% & Fuel savings of at least 30%
• Reduced emission by 40% for a greener process
• Super fast heating / cooling
• Online support service, 24 x 7
• Low maintenance
• User friendly software support
• Very less time between the end of one cycle and the start of another
• Lowest fuel consumption for every cycle

Turntable For Fixed Arm Machines And Independent Carriages For Shuttle And Independent Arm Machines
INDEPENDENT CARRIAGES :In case of a independent ARM machine, there are three or four independent carriages, one for each ARM. These ARMS move independent of each other and thus these machines are very flexible if there is a diverse range of products and not much experience with the three ARM machines.

Gas/Diesel/Duel Heated Sintering Oven
The oven is in solid self-supporting sheet steel, with high quality 150/200mm thick insulation.The oven has extremely well designed expansion joints to take care of expansion during heating of the oven upto 400 degrees centigrade.The combustion room is made of steel with connection flage for the burner and is made from heat resistant steel. The fully automated gas or diesel burner as per customer requirement is with modulating control mode, with installed ignition electrode and UV supervision device complete with safety.

Multiple Cooling Cum Load Unload Station
The supply air fan for air cooling with casing made of sheet steel, the centrifugal fan-wheel is balanced statically and dynamically and is coupled with the closed three-phase current motors of protection class IP54 A complete cooling cycle is programmed with supply air, exhaust air, spray water and mist water as per requirement of a given production in any combination for a desired time. You can also programme alarms for removal of inserts and breathers.

Mould Carriers Offset And Straight
The standard combination is of two straight ARM and one offset ARM for a three ARM machine, but can also be as per customer requirement. The choice of straight or offset ARM depends on the product that a customer wants to rotomould. The ARM of Reinhardt machines are much robust compared to those of the competitors on the market and require the least possible maintenance. One can position the ARM for pre-heating position and/or second charge position at the heating station. The ARM is positioned at the cooling station as the cycle ends so that it is in the correct position at the de moulding station. Also the ARM can be manually inched at the de moulding station if required.

Operator Panel
Operator Panel is user friendly with only a few push buttons, all the operator has to do is keep pushing the flashing button for the cycle to start in auto mode and then he is free to do other work. The panel also houses a Desk PC or a touch screen industrial PC which can be used to feed infinite recipes and get management reports on production. You can also store and recall detailed recipes for cooking and cooling to ensure a consistent production. The management can also see down time or idle time of the machine every day, week, or month. Time loss can be tabulated operator or shift wise to execute a point system.

Control Panel
All machines are equipped with PLC having sequential controls and numerous safety interlocks. Control panel includes devices only from reputed international European or Japanese brands which are available locally in your country. All electricals in the machine are CE marked and made to EU standards, panels are built in modular form with soft and hard copies of drawings, programmes and manuals easily available on the PC.