Panchkula, Haryana, India
Our Products
The Technology concept of Differential wound linear regulator with Series Transformer in RED PHASES make Automatic Voltage Controller.
We are manufacturing Industrial type Automatic Voltage Regulators (Stabilizers/Rectifiers) using thedifferential wound Vertical Roller Type Regulators.Manufacturing LINEAR TYPE +/- Heavy Duty Regulators withrollers rolling on both the sides of the coil (as illustrated in the brochure enclosed). The size of conductor used is more than THREE TIMES than used in conventional design regulators. Being + type, the same winding is used for boosting the voltage on one side and bucking the voltage on the other side of the regulator. So, the rating of the regulator required is half of the conventional design regulator.
The losses of differential wound linear regulator should be 1/18th of the conventional type regulatorand due to heavy section of copper used in our regulator, overall size is more and practically the losses of our regulator are 1/5th of the conventional type regulator.
The manufacturing material cost of differential wound linear regulator is almost more than THREE TIMES the cost of conventional design Regulator.
As per the Regulator design, the regulator is technically OUT OF CIRCUIT, When the input voltage is LOWEST/HIGHEST as per the voltage range of the stabilizer while in stabilizer with conventional brush type regulators, the regulator is maximum in the circuit and losses are maximum at LOWEST/HIGHEST as per the range of the stabilizer.
The Actual Efficiency of our stabilizer in running conditions at 100%Load for the (360-460 V) model will be 99.5% in comparison to less than approx. 95-96% of conventional type stabilizer for the Automatic Voltage Controller of similar rating.
linear Coils are manufactured with copper strips of heavy cross sectional area instead of copper wires in conventional design with 4-QPC paper layer cover plus 3 TPC Polyester film cover for better insulation to resist the high temperatures on continuous duty cycle with Electrolytic grade copper strip while taking the current density of2 to 2.5 amps/mm2 in oiltherefore the maximum temperature rise at full load never goes more than 25 degree centigrade while in conventional design accordingly we use more
The RP Series includes the 1 KVA to 200 KVA (1 Phase, 3 Phase) double conversion On-Line UPS with an isolation transformer at Output. The Load is supplied continuously by the inverter with clean, stabilized and regulated sine wave output power.
Input & Output filters increase the immunity of load from power disturbances and surges. RP Series is useful for mission critical applications like IT, Call Centres, Hospitals, and Industrial Automation etc. Thanks to state-of-the-art microprocessor / DSP based outstanding advanced technology design. RP Series is supplied with software which can be used for monitoring various parameters of the UPS and also can be useful for remote monitoring / control on the web by adding SNMP Card.
Based on our RED PHASE technical expertise we are able to supply Compact Type Substation is compartmentalized with suitable medium voltage, low voltage sections & transformer section with separate doors for each compartment. Our Packaged Sub-Stations are tested as per latest IEC standard 62271-202.
These Packaged Sub-Stations are designed & manufactured as per the tailored requirement of thecustomer. Variety of HV/ LV Switchgear /VCB can be chosen & the CSS is designed accordingly.They are also designed to withstand electrical impulses, thermal and dynamic stresses.
They are fully compartmentalized, thus safe to use & require minimum maintenance. One of the biggest advantage of using a PSS is that theres no need to use abling thus being more economical as well as safer than using bulky non-aesthtic cables.
Red Phase brings you the finest products designed and engineered by the people who have been in the same field for the last 30 years. Rectifier is an economical and most efficient method of obtaining DC from AC supply. Red Phase manufactures a wide range of rectifiers covering 0-500 Volts and upto 15000 Amps. capacity suitable for Electroplating, Anodising, Hydrogenation and many other Electrochemical processes. The entire manufacturing process is under one roof ensuring 100% quality control at every stage of production. We believe in quality & customers satisfaction.
