Wires #4072588

Supplying wide array of products, we successfully make deliveries within the dedicated time span. We keep close eye on the quality of the products so as to deliver the best in class range.

Applications

• CANOpen is used for motion-oriented control networks and is used in various applications -
• Medical equipment
• Off-road vehicles
• Maritime electronics
• Railway applications
• Building automation

Specificaions

• CANOpen, like some other protocols, utilizes EIA-485 cables. Traditionally, these cables required conduit for routing; however, Belden has engineered CMP listed cables which offer flame and smoke protection – providing supreme electrical performance and cost savings without the need for conduit. Options include -
• Standard CANOpen – Belden 3105A
• Paired constructions available - 1, 2, 3 or 4 pairs
• Armoring options - continuous or interlock
• Power-limited tray cable (PLTC) rating available
• Additional jacket options - CPE available

Network Protocol Definition

• Developer – CAN In Automation, Phillips
• Type of Architecture – Open specification, various chip and product vendors
• Interconnections/Nodes – 127 nodes
• Network Topology – Trunkline, Dropline
• Distance – 25-1, 000 m
• Data Size – 8 bytes (variable)
• Data Speed – 1 Mbps, 800 kbps, 500 kbps, 250 kbps, 125 kbps, 50 kbps, 20 kbps, 10 kbps
• Communication Method – Master/Slave, Peer-To-Peer, Multicast, Multimaster
• Cabling Requirement – 120-Ohm Shielded Twisted Pair

With us, clients can stay assured for secure, safe and hassle free transactions. Our payment procedures are easy to use and guarantee confidentiality of the transaction. Listed amidst the reliable names hailing from Faridabad(India), we deliver top-notch quality products.

Product DefinitionBelden CC-Link cables have been developed alongside the Mitsubishi technology and are engineered specifically to meet the testing requirements and application needs. Options include :

• Standard DataBus – Belden 1348A (Mitsubishi BA1SJ61-S)
• Standard DeviceBus – Belden 1349A (Mitsubishi BA1SJ61-P)
• Fiber Simplex and Duplex cordsets available

Network Protocol Definition

• Developer – Mitsubishi
• Type of Architecture – Application Specific Integrated Circuit (ASIC) required
• Interconnections/Nodes – 64 devices
• Network Topology – Bus
• Distance – 100 m-1, 200 m (13.2 km with repeaters)
• Data Size – 8, 192 points (remote I/O), 4, 096 words (remote register)
• Data Speed – 156 kbps-10 Mbps
• Communication Method – Master/Slave
• Cabling Requirement – 110-Ohm Shielded Multi-Conductor

Our well-structured warehouse is properly maintained and installed with diverse amenities required for the safe storage of the products. Moreover, we keep on updating the unit for enhanced safety. Being a prominent name in this area of operations, we, as a Supplier, bring forth qualitative array of Belden Data Communication cables (CONTROLNET).

Product Specifications

• Belden ControlBus low-loss coax cables are designed specifically for high-speed, time-critical ControlNet applications. The standard construction for this application is industrial RG-6, quad shield coaxial cable designed for compliance with the ControlNet specification. Several options are available, including -
• Standard ControlNet – Belden 3092A
• High temperature options available
• Armoring options - aluminum interlock, aluminum continuous or steel interlock
• Additional jacket options - CPE and LSZH available

Network Protocol Definition

• Developer – Allen-Bradley
• Type of Architecture – Open specification, multiple chip vendors
• Interconnections/Nodes – 99 nodes
• Network Topology – Linear, Tree, Star, or Combination
• Distance – 250-1, 000 m (2-48 nodes; Copper), 3 km (30 km with repeaters; Fiber)
• Data Size – 0-510 bytes (variable)
• Data Speed – 5 Mbps
• Communication Method – Producer/Consumer, Device Object Model
• Cabling Requirement – 75-Ohm Quad Shield RG-6 Coax, Fiber

The payment methods we opt are highly confidential and we have maintained a well-organized database listing all the transaction details and clients' personal details to avoid any confusion. We are a quality centric organization, offering the best-in-class products that are manufactured using the experts approved and certified raw material procured from reliable sources.

Applications

• Belden Blue Hose cables provide proven, robust physical media for Data Highway transmission across the factory floor. These cables handle automation and control data for multiple devices on the same cable in applications such as:
• PLC processor interlocking
• Peer-to-peer messaging
• Remote programming
• Troubleshooting
• I/O updates

Data Highway Product Specificaions

• Belden solutions set the standard for Data Highway applications. The standard construction for this application is 78 ohm twin-axial cable for legacy PLC systems, but the following range is available:
• Standard Blue Hose – Belden 9463
• 600V TC ratings available
• High flex constructions available
• Armoring options: aluminum interlock or aluminum continuous
• Direct burial options (with gel)
• Dual constructions available
• LSZH options available

Network Protocol Definition

• Belden solutions set the standard for Data Highway applications. The standard construction for this application is 78 ohm twin-axial cable for legacy PLC systems, but the following range is available:
• Developer – Allen-Bradley
• Type of Architecture – Proprietary
• Interconnections/Nodes – 64 nodes/segment
• Network Topology – Linear Trunk
• Distance – 3 km
• Data Size – 180 bytes
• Data Speed – 57.6 kbps
• Communication Method – Multimaster, Peer-To-Peer
• Cabling Requirement – 78-Ohm Shielded Twinax (Twisted Pair)

Raw materials form the basis of any product and thus we obtain them after checking against varied quality parameters. Moreover, we procure raw materials only from reliable sources. In order to keep transparency in the transactions, we offer an invoice to the clients. This helps in maintaining a reliable bond between organization and clients. Moreover, we offer secure payment procedures.

Product Specifications

• DeviceNet cables are designed and manufactured for compliance with the ODVA specification. As an active member for ODVA, Belden provides an extensive line of cables for these applications. The broad range of ODVA designated products in the market include:
• Tray cable (TC) and power-limited tray cable (PLTC) ratings available: Class 1 (600V) and Class 2 (300V)
• Exposed run (ER) versions available for TC and PLTC constructions
• Additional jacket options: CPE and LSZH available, with color variations for safety designation
• Interlock armoring available

Network Protocol Definition

• Developer – Allen-Bradley
• Type of Architecture – Various chip and product vendors
• Interconnections/Nodes – 64 nodes
• Network Topology – Trunkline, Dropline with branching
• Distance – 500 m (6 km with repeaters)
• Data Size – 8 bytes
• Data Speed – 500 kbps, 250 kbps, 125 kbps
• Communication Method – 500 kbps, 250 kbps, 125 kbps
• Cabling Requirement – 120-Ohm Shielded Twisted Pair (Signal/Power Pairs)

Our products are the most sought after in the market, as they are specifically made as per global and domestic quality managements systems. The company is deeply rooted in Faridabad(India) and is acknowledged for its fair pricing policy and professional attitude.

Belden EIA-485 Cables Provide Superior Electrical Performance in Plenum Environments – Without the Use of ConduitEIA-485 (formerly RS-485 or RS485) is an OSI model physical layer electrical specification of a two-wire, [1] half-duplex, multipoint serial connection. The standard specifies a differential form of signaling. The difference between the wires’ voltages is what conveys the data. One polarity of voltage indicates a logic 1 level, the reverse polarity indicates a logic 0 level. The difference of potential must be at least 0.2 volts for valid operation, but any applied voltages between +12V and -7V will allow correct operation of the receiver.

Using a EIA-485 physical interface, the maximum distance achieved would be 4, 000 ft. at 100kbps. A maximum of 247 nodes is possible.

EIA-485 PLTC Cable -22 AWG Stranded (7×30) Tinned Copper Conductors, Overall Beldfoil (100% Coverage) + TC Braid Shield (90% Coverage), Drain Wire – Non-plenum

• 3105A 1-Pair, Datalene Insulation, Black UV-resistant PVC Jacket, 300V
• 3106A 1.5-Pair, Datalene Insulation, Black UV-resistant PVC Jacket, 300V
• 3107A 2-Pair, Datalene Insulation, Black UV-resistant PVC Jacket, 300V
• 3108A 3-Pair, Datalene Insulation, Black UV-resistant PVC Jacket, 300V
• 3109A 4-Pair, Datalene Insulation, Black UV-resistant PVC Jacket, 300V

EIA-485 Cable -24 AWG Stranded (7×32) Tinned Copper Conductors, Overall Beldfoil® (100% Coverage) + TC Braid Shield (90% Coverage) – Non-plenum

• 9841 1-Pair, Polyethylene Insulation, Chrome PVC Jacket, Drain Wire, UL AWM Style 2919, 30V 80°C, DMX 512
• 9842 2-Pair, Polyethylene Insulation, Chrome PVC Jacket, Drain Wire, UL AWM Style 2919, 30V 80°C, DMX 512
• 9843 3-Pair, Polyethylene Insulation, Chrome PVC Jacket, Drain Wire, UL AWM Style 2919, 30V 80°C, DMX 512
• 9844 4-Pair, Polyethylene Insulation, Chrome PVC Jacket, Drain Wire, UL AWM Style 2919, 30V 80°C, DMX 512

EIA-485 Cable -24 AWG Stranded (7×32) Tinned Copper Conductors, Overall Beldfoil (100% Coverage) + TC Braid Shield (90% Coverage) – Plenum

• 82841 1-Pair, Foam FEP Insulation, Natural Flammarest® Jacket, Drain Wire, 300V RMS
• 82842 2-Pair, Foam FEP Insulation, Natural Flammarest® Jacket, Drain Wire, 300V RMS
• 89841 1-Pair, Foam FEP Insulation, Red FEP Jacket, Drain Wire, 300V RMS
• 89842 2-Pair, Foam FEP Insulation, Red FEP Jacket, Drain Wire, 300V RMS

Belden Infinity Flexible Automation Cable -24 AWG Stranded (41×40) Bare Copper Conductors, Twisted Pairs, Overall Beldfoil (100% Coverage) + TC Braid Shield (85% Coverage)

• 7200A 1-Pair, Foam Polyethylene Insulation with Skin, Green Oil-resistant PVC Jacket, 300V 60°C
• 7201A 2-Pair, Foam Polyethylene Insulation with Skin, Green Oil-resistant PVC Jacket, 300V 60°C
• 7202A 3-Pair, Foam Polyethylene Insulation with Skin, Green Oil-resistant PVC Jacket, 300V 60°C
• 7203A 1-Pair, Foam Polyethylene Insulation with Skin, Green Oil-resistant PVC Jacket, 300V 60°C
• 7206A 1-Pair, Foam Polyethylene Insulation with Skin, Green Oil-resistant PVC Jacket, 300V 60°C

Custom cables are available upon request which can utilize any number of construction features such as -

• Armoring - Aluminum Interlock, Steel Interlock, and Continuous Corrugated Aluminum
• Armor Tapes - Corrugated Copper, Aluminum, and Steel
• Jackets - PVC, CPE, LDPE, TPE, HDPE, Fluorocopolymer, Oil Res II, Low Smoke Zero Halogen (LSZH), Haloarrest®, and Polyurethane
• Shielding - Overall Beldfoil®, Duofoil®, TC Braid, TC Double Braid, Individual Beldfoil Copper Tape Shields, and “French Braid”
• Insulations - Datalene®, XLPE, FEP, Polypropylene, Foam FEP, HDPE, PVC, TPE, and PVC-Nylon
• Conductors - Solid BC, Stranded BC, Solid Bare Copper-covered Steel, and Stranded TC

Our entire range is made to go through a string of quality regulatory processes to make sure they are according to industry standards. Buyers can stay rest assured for damage-free products from our end as we make use of quality packing material. We also fulfill different packing requirements of the clients such as customized or standard.

Applications

• With the high cost of downtime in industrial applications, particularly in remote locations, investing in cable with proven performance and reliability can significantly reduce the likelihood of system failure. Foundation Fieldbus is the dominant industrial network for:
• Oil and gas markets
• Petrochemical industries
• Batch and process applications

Specificaions

• Belden offers a complete solution of Fieldbus cables, including 100 ohm shielded twisted pair cables designed for compliance with the Foundation Fieldbus standard, IEC 61158-2 (ISA/SP-50), and several options are available:
• Standard Foundation Fieldbus: Belden 3076F (Type A), Belden 3077F (Type B)
• Multi-pair constructions available: 2, 5, 8, 12, 16, 20, 24 and 50 pairs
• Shielding options: foil/braid shield available for 18, 16, and 14 AWG designs
• Armoring options: continuous or interlock
• Additional jacket options: CPE and LSZH available
• High speed constructions available

Benefits

• Belden Fieldbus cables are engineered for optimal electrical and physical performance and designed to withstand even the destructive effects of:
• Temperature extremes
• Humidity/moisture
• Oil & dust
• UV radiation

Network Protocol Definition

• Network Protocol Definition – Developer FieldComm (formerly Fieldbus Foundation)
• Type of Architecture – Multiple chip & product vendors
• Interconnections/Nodes – 240 nodes/segment
• Network Topology – Star, Bus
• Distance – 1, 900 m
• Data Size – 128 octets
• Data Speed – 31.25 kbps
• Communication Method – Client/Server, Publisher/Subscriber, Event Notification
• Cabling Requirement – 100-Ohm Shielded Twisted Pair, Fiber

We offer an invoice stating the payment terms as well as other details required for the final payment. In addition, our transaction modes are simple, safe and reliable. We ensure that the products will remain in a safe condition and for this; we have hired experts who keep a strict vigilance on the entire unit. Moreover, our unit is timely upgraded ensuring more safety.

Applications

• Developed byModicon, Modbus is a master/slave serial line communication protocol is used to interconnect intelligent automation devices. This protocol operates at layer 2 of the OSI model.
• In a master-slave type system, the “master” node issues explicit commands to one of the “slave” nodes and processes responses. Typically, slave nodes will not transmit data without a request from the master node, and they will not communicate with other slaves.
• At the physical level, Modbus systems may use different physical interfaces (EIA-485, RS-232). The TIA/EIA-485 (EIA-485) Two-Wire interface is, however, the most common. As an option, the EIA-485 Four-Wire interface may be implemented. And when the system only requires short point-to-point communication, the TIA/EIA-232-E (RS-232) serial interface may be used as an interface.
• Modbus application layer messaging protocol, positioned at layer 7 of the OSI model, provides client/server communication between devices connected on buses or networks. The client role is provided by the Master of the serial bus and the slave nodes act as servers.
• For applications that require high up-time, Modbus Plus cable redundancy is offered on the dual cable PCI interface. A redundant cable capability allows Modbus Plus to communicate over two independent cables, testing the integrity of both cables with every message. Should a problem occur with one of the cables, the system automatically switches over to the other cable. The faulty cable is then flagged as a statistic and it is visually flagged on the interface card. This redundancy allows a network or a plant to continue operation even with a cable out of service.
• Using a RS-232 physical interface, the maximum distance would be 50 ft. at 10kbps. Using a EIA-485 physical interface, the maximum distance would be 4, 000 ft. at 100kbps. A maximum of 247 nodes are possible.

Modbus Cables
Modbus RS-232 Shielded Twisted Pair Cables

• 8777 3 Pairs, 22 AWG Stranded (7×32) Tinned Copper Conductors, Datalene® Insulation, Individually Beldfoil Shielded (100% Coverage), 24 AWG Stranded Tinned Copper Drain Wire, Chrome PVC Jacket, 300V 90^oC
• 88777 3 Pairs, Plenum-rated, 22 AWG Stranded (7×30) Tinned Copper Conductors, FEP Insulation, Individually Beldfoil Shielded (100% Coverage), , 22 AWG Stranded Tinned Copper Drain Wire, FEP Jacket, 300V 200^oC

Modbus II RG-6 Type Coaxial Cables

• 3092A RG-6, Quad Shield, PVC
• 3093A RG-6, Quad Shield, Plenum-rated
• 3092F RG-6, Quad Shield, PVC, Flexible Version
• 123092A RG-6, Quad Shield, Aluminum Armor

RG-6, Quad Shield, Steel Armor

Custom cables are available upon request which can utilize any number of construction features such as -

• Armoring - Aluminum Interlock, Steel Interlock, and Continuous Corrugated Aluminum
• Armor Tapes - Corrugated Copper, Aluminum, and Steel
• Jackets - PVC, CPE, LDPE, TPE, HDPE, Fluorocopolymer, Oil Res II, Low Smoke Zero Halogen (LSZH), Haloarrest®, and Polyurethane
• Shielding - Overall Beldfoil®, Duofoil®, TC Braid, TC Double Braid, Individual Beldfoil Copper Tape Shields, and “French Braid”
• Insulations - Datalene®, XLPE, FEP, Polypropylene, Foam FEP, HDPE, PVC, TPE, and PVC-Nylon
• Conductors - Solid BC, Stranded BC, Solid Bare Copper-covered Steel, and Stranded TC

Hirschmann Active Devices

• Representing experience and expertise in automation technology, Hirschmann products have been designed to ensure hassle-free data communication under even the toughest conditions.
• For Modbus, Hirschmann provides the OZD 485 G12 series of industrial-grade fiber optic repeaters. This series offers both ring redundancy and predictive maintenance.
• Lumberg Automation Connectivity

Lumberg, a leading name in industrial connectivity, offers the following connectivity products for Modbus application -

• Centralized I/O distribution systems
  • e2c 20, IP20 rated

• Fieldbus I/O modules
  • LioN-S

• Field-attachable connectors

• Overmolded cordsets
  • Micro M12-M12/IP67
  • RJ45 to RJ45/IP20
  • RJ45 to Micro M12/IP20

• Ethernet switches

Our organization is positioned at Faridabad(India) and has gained immense acknowledgement and a respected place in the market. As, we have a well-organized resource chain system, our organization is capable of fulfilling wholesale consignments with ease and make on time deliveries.

Product Specifications

• PROFIBUS represents one of, if not the number one, the largest installed bases of fieldbus systems in the world. Using shielded twisted pair constructions, the two main application-specific profiles are PROFIBUS DP, which is optimized for discrete factory automation, and PROFIBUS PA, which is optimized for process automation.
• Standard PROFIBUS DP – Belden 3079A
• Standard PROFIBUS PA – Belden 3076F
• Armoring options: continuous or interlock
• Additional jacket options: CPE and LSZH available
• Stranded conductor versions available

Network Protocol Definition

• Developer – Siemens
• Protocols – Profibus-DP and Profibus-PA
• Type of Architecture – 300+ product vendors
• Interconnections/Nodes – 127 nodes
• Network Topology – Line, Star, Ring
• Distance – 100-1, 200 m (Copper), 24 km (Fiber)
• Data Size – 0-244 bytes
• Data Speed – 9.6 kbps-12 Mbps
• Communication Method – Master/Slave, Peer-To-Peer
• Cabling Requirement – 150-Ohm Shielded Twinax (Twisted Pair), Fiber