TS21I ELE id Industrial Electrochmical type gas leak detector. Electrochemical type of gas sensor is used in this detector. This sensor provides good reproducibility, good performance against changes in atmospheric temperature and humidity. It has long life-span and easy operation. Detector have provision to set Two alarm levels of warnings. PFC Relay output is provided and this output can be connected to the conventional Gas Detection Panel OR SCADA system.For BMS connectivity detector have provide RS485 output.Electrochemical Sensor is used in this model which does not required calibration frequently.(Additionally 4-20mA and Selectable 0-5 V & 0-10V Analog output could be also available).Enclosure used is suitable for Zone 1 & Zone 2 hazardous areas. Application area of this detector is Refineries and Petrochemical Plants, Chemical and Pharma Industries, Fertilizer, food industries, mining projects etc. where gas leakage is possible.

We are offering commercial gas leak detector.This wall mounted unit is compact and designed for low cost domestic applications as well as commercial applications like hotel kitchens. It can be used in dusty and moist environment. Features: 1. Detects gases like lpg, cng, natural gas2. Dust proof and water resistant enclosure3. Lcd bar graph indication for % lel indication4. 12vdc pulse output for external gas valve5. Test switch for checking unit alarm condition6. Rs485 port for networking multiple gas detectors to building management system7. Supports modbus rtu protocol technical specification: 1. Operating voltage: 12 vdc2. Operating temperature : -10c to 55c3. Power consumption : about 0.5w4. Humidity: less than 95%

TS21I-CAT-H2 Industrial Grade Hydrogen Gas Leak Detector  is suitable for all Hydrogen gases. Application area of this detector is Refineries, Chemical plant, Gas Cylinder Refilling and Battery Back Power Stations etc where gas leakage is possible. It reads the gas concentration in Air and transmits to a detection panel over digital bus as well as it is show LEL level on display. Catalytic type of gas sensor is used in this detector , This sensor is provide good reproducibility, good performance against changes in atmospheric temperature and humidity. It has long lifespan and easy operation. Detector have provision to set Two alarm levels of warnings.

TS21I-CAT-HC gas detector is suitable for all Hydrocarbon gases. Application area of this detector is Refineries, Chemical plant, LPG station, Gas Boiler, and Spray-Paints etc where gas leakage is possible. It reads the gas concentration in Air and transmits to a detection panel over digital bus as well as it is show LEL level on display. Catalytic type of gas sensor is used in this detector , This sensor is provide good reproducibility, good performance against changes in atmospheric temperature and humidity. It has long lifespan and easy operation. Detector have provision to set Two alarm levels of warnings.

PFC Relay output is provided and this output can be connected to the conventional Gas Detection Panel OR SCADA system.

For BMS connectivity detector have provide RS485 output.

Catalytic sensor is used in this model.

(Additionally 4-20mA and Selectable 0-5 V & 0-10V Analog output could be

also available).

Enclosure used is suitable for Zone 1 & Zone 2 hazardous areas.

Note : Enclosure depicted above is indicative. Specs subject to change without notice. 

Buyers can stay rest assured for the delivery of the orders as we are backed by the most sophisticated transit system. we are a quality-conscious firm and for maintaining product quality, we consider several measures so as to ensure that only flawless lot reaches the buyers.

 

Product Description : Industrial Infra Red Type Gas Leak Detector (TS21I IR) is suitable for all Hydrocarbon gases. Application area of this detector is Refineries and Petrochemical Plants, Oil and Gas , LPG station, Chemical and Pharma Industries, Fertilizer and Power plants, Gas Boiler, and Spray-Paints etc where gas leakage is possible.  It reads the gas concentration in Air and transmits to a detection panel over digital bus as well as it shows LEL level on display. IR type of gas sensor is used in this detector. This sensor provides good reproducibility, good performance against changes in atmospheric temperature and humidity.  It has long life-span and easy operation. Detector have provision to set Two alarm levels of warnings. PFC Relay output is provided and this output can be connected to the conventional Gas Detection Panel OR SCADA system.

Product Features  & Specifications :

• Gas Sampling Natural diffusion
• Detection Range—0-100% of LEL

• Preset Alarm Levels
  • Low  Alarm Level
  • High Alarm Level

• Auto Calibrated
• Response Time T90 less than 30Sec.
• Infra Red sensor is used
• PFC Relay NO or NC PFC O/P and It will be Selectable Latching type or Pulse Type
• Sensor Life : Up to 10 years
• Analog O/P : Selectable 0-5 V & 0-10V  output
• 4-20mA current output
• Operating Voltage Range is 12 to 30VDC

Safety of commercial & industrial kitchens is of prime importance. TS12CLRRS485.Commercial Grade Gas Leak Detectors can detect LPG or PNG and warn beforethe gas density in air reaches unwanted levels.This model also provides Bar-graph indication for level of concentration ofgas.Four levels, 2.5%, 5%, 7.5% & 10% of LEL are provided. Dustproof & Water Splash proof IP65 EnclosureReplaceable FilterGas leakage LEL Bargraph indicationCan be interfaced with Gas Detection Panelthrough RS-485 output.Sensor life up to 4year.

Carbon monoxide (CO) is a colorless, odorless gas emitted from combustionprocesses. Nationally and particularly in urban areas, the majority of COemissions to ambient air come from mobile sources. CO can cause harmfulhealth effects by reducing oxygen delivery to the body's organs (like the heartand brain) and tissues. At extremely high levels, CO can cause death. A carbonmonoxide detector or CO detector is a device that detects the presence ofthe carbon monoxide (CO) gas in order to preventcarbon monoxide poisoning.CO detectors are designed to measure CO levels over time and sound analarm before dangerous levels of CO accumulate in an environment, givingpeople adequate warning to safely ventilate the area or evacuate. It is complianceof EN-50291-1 standard Battery OperatedAutomatic Calibration at the desired level ofPPM.Sensor Life up to 5 YearBuzzer Output.Battery life up to 5 YearReset Switch

TS12(REF)R is ideal gas detector for detecting refrigerant gas leakages from Refrigeration systems in commercial and Industrial premises, Food Storage & Processing facilities, Supermarkets, Parking Garages, Wastewater Treatment Facilities, Hospitals and Universities.Variant models are available for different refrigerants like R410a, R408a etc.It has long life Semiconductor sensor. This model also provides Bargraph indication for level of concentration of gas. Four levels, 125, 250, 375 & 500 of PPM are provided. Alarm is indicated by sounding of beep at every level. After the concentration level crosses 500pm continuous alarm will sound and relay (PFC) output will change the status. It is available in Dustproof & WaterSplash Proof IP67 Enclosure.Models Available for following gases :HFC : R134a, R404a, R407c, R410aHCFC : R22, R401a, R406a, R408a, R409a.Gas Detector Models also available for other gases e.g. NH3, H2, H2S, Explosive Gases for different applications e.g. household, commercial and industrial.

Product Description:

TS12CEx gas detector is suitable for LPG gas. Application area of this detector is Refineries, Chemical plant, Gas Cylinder Refilling , Gas Boiler, and Spray- Paints etc Where gas leakage is possible. It reads the gas concentra-tion in Air If concentration is reached hazardous level it’s generates alert and send signal to the Gas detection panel OR BMS.

Semiconductor type of gas sensor is used in this detector .This sensor is pro-vide good reproducibility. It has long life-span and easy operation.

PFC Relay output is used to connect or interface conventional Gas Detection Panel OR SCADA system/BMS.

 Semiconductor sensor is used in this model.

 Product Features & Specifications:

Gas Sampling by Natural diffusion

Auto Calibrated

Replaceable Filter & Gas Sensor

Manual Calibration (On Site)

PFC Relay O/P (NO or NC)

Explosion Proof Enclosure is used

Indian MFG Product

TS12HLB/HLRB are ideally suitable for applications where additional safety is required. The detector is positioned in such a way that gas leakage is detected as soon as possible.

The output of the detector is Buzzer.

Product Description :

• TS230HLB/HLRB are ideally suitable for applications where additional safety is required. The detector is positioned in such a way where gas leakage is detected as soon as possible.
• The output of the detector is Buzzer. Optional Relay and RS-485 output also available.

Product Features & Specifications :

• Kitchen Platform Panel mountable.
• Automatic Calibration at the desired level of LEL (Usually 10% of LEL).
• In addition, it can detect heat.
• Can be interfaced with Gas Detection Panel through PFC relay output.

Hydrogen gas leak detector TS12C-Ex gas detector is suitable for all Hydrogen gases. Application area of this detector is Refineries, Chemical plant, Gas Cylinder Refilling and Battery Bank Power Stations etc where gas leakage is possible. It reads the gas concentration in Air and transmits to a detection panel over digital bus . Semiconductor type of gas sensor is used in this detector .This sensor is provide good reproducibility, good performance against changes in atmospheric temperature and humidity. It has long life-span and easy operation.

TS12CC1R are ideally suitable for applications where additional safety is required.

The detector is positioned in such a way that gas leakage is detected as soon as possible. The output of the detector is PFC relay.

• Latest electrochemical technology is used

• Dustproof & Water Splash proof – IP65 Enclosure

• Replaceable Filter

• Only Commercial Detector available with

LEL Bargraph

• No Calibration required

Safety of commercial & industrial kitchens is prime importance.TS12CHRCommercial Grade Hydrogen Gas Detectors can detect Hydrogen and warnbefore the gas density in air reaches unwanted levels.This model also provides Bar-graph indication for level of concentration ofgas.Four levels, 2.5%, 5%, 7.5% & 10% of LEL are provided. Dustproof & Water Splash proof IP65 EnclosureReplaceable FilterOnly Commercial Detector available withLEL BargraphCan be interfaced with Gas Detection Panel

vighnaharta security takes pleasure to introduce "truesafe" range of commercial grade gas leak detectors. Safety of commercial kitchens & premises is of prime importance these days. Our lpgpngcoco2 & voc detectors can detect respective gases and warn before the gas density in air reaches unwanted levels. In addition it provides early warnings by detection of heat in case of lpgpng detector

some of the unique features of these models are

• only detector available which is kitchen platform panel mountable.
• 100% more effective than competing
• products
• in terms of ability to detect lpg.
• in addition to lpg leaks it can detect heat, very useful features for kitchens.
• automatic calibration at the desired level of lel (usually 10% of lel).
• bargraph gas concentration level indication (in models ts12f and ts230f).
• models available with flasher (ts12f & ts230f).
• models available for voc, co2 and co as well.
• 
  commercial grade gas leak detectors use better quality sensors suitable for commercial use. Sensor is more reliable, consistent and accurate. These are also capable of integrating with building management systems (bms). They are useful in following applications.
  
  • restaurant kitchens, industrial & other canteens
  • hotels, malls & offices
  • 
    common features for commercial detectors.
    
    • +9vdc to +32vdc operation
    • options to detect natural gas & lpg, voc,