Write a Review
Our Products
Nut Fastener
2 Products availableSteel Plates, Sheets, Bars & Rods
2 Products availableLock Nuts
1 Products availableSteel & Steel Products
1 Products availableWe offer the best product range of All Threaded Rod, Metric Hex Nuts, Heavy Hex Nuts and Hex Jam Nuts.
A pre-threaded bar with metric thread pitch which may be cut to length with a metal cutting hacksaw or power band saw. A nut will move easily over clean cut ends. Only minimal burr removal may be required from rough cut ends.
Metric Threaded Rod (DIN 975):
Stainless Steels Material Grade :304, 304B, 309, 310, 316, 316B, 317, 317L, 321, 347, 401, 416, 430&501.Diameter :M12 to M42 up to 1200 MM in Length
Duplex & Super Duplex :UNS31803, S32750.
Diameter :M12 to M42 up to 1200 MM in Length
Hastelloy :HastelloyC-276, HastelloyC-22.
Diameter :M12 to M42 up to 1200 MM in Length
Exotics :904L, A-286, Alloy20, Alloy50, NitronicAlloys50, Titanium.
Diameter :M12 to M42 up to 1200 MM in Length
Nickel Alloys :Inconel600, 601, 625, 718, 750, 800/800H, 825, 925, Monel400, 405, K-500&Nickel200.
Diameter :M12 to M42 up to 1200 MM in Length
HIGH TENSILE Grade 8.8/10.9/12.9/B7
A six-sided internally threaded fastener with metric thread pitch. 16 millimeter nuts and smaller are chamfered on the top and the bearing surface. Larger nuts may be double chamfered, or have a washer face on one side and a chamfered surface on the opposite side. Generally manufactured in accordance with DIN Standard 934 or ISO Standard 4032.
Stainless Steels Material Grade :304, 304B, 309, 310, 316, 316B, 317, 317L, 321, 347, 401, 416, 430&501.Diameter:M27 to M64 up to 1200 MM in Length
Duplex & Super Duplex :UNS31803, S32750.
Diameter: M27 to M64 up to 1200 MM in Length
Hastelloy:HastelloyC-276, HastelloyC-22.
Diameter:M27 to M64 up to 1200 MM in Length
Exotics:904L, A-286, Alloy20, Alloy50, NitronicAlloys50, Titanium.
Diameter:M27 to M64 up to 1200 MM in Length
Nickel Alloys :Inconel600, 601, 625, 718, 750, 800/800H, 825, 925, Monel400, 405, K-500&Nickel200.
Diameter:M27 to M64 up to 1200 MM in Length
HIGH TENSILE Grade 8.8/10.9/12.9/B7
A heavy hex nut made of alloy steel, manufactured in accordance with ASTM Standard A194 Grade 2H.
Used for high-temperature and high-pressure conditions.
Heavy hex nuts are slightly larger and thicker than standard (finished) hex nuts. There are numerous grades and the heavy pattern is typically used for large diameter and high strength bolts.
Stainless Steels Material Grade :304, 304B, 309, 310, 316, 316B, 317, 317L, 321, 347, 401, 416, 430&501.Diameter:M27 to M64 up to 1200 MM in Length
Duplex & Super Duplex :UNS31803, S32750.
Diameter: M27 to M64 up to 1200 MM in Length
Hastelloy:HastelloyC-276, HastelloyC-22.
Diameter:M27 to M64 up to 1200 MM in Length
Exotics:904L, A-286, Alloy20, Alloy50, NitronicAlloys50, Titanium.
Diameter:M27 to M64 up to 1200 MM in Length
Nickel Alloys :Inconel600, 601, 625, 718, 750, 800/800H, 825, 925, Monel400, 405, K-500&Nickel200.
Diameter:M27 to M64 up to 1200 MM in Length
HIGH TENSILE Grade 8/10/12/2H
A six-sided internally threaded fastener which is thinner than the thickness of a finished hex nut.
Used in combination with a finished hex nut to keep the nut from loosening.
Hex jam nuts are thinner than a standard hex nut but have the same dimension across the flats and corners. Hex jam nuts have two common applications. A jam nut can be threaded onto a bolt and run tight against the standard nut which will lock the nut in place and prevent it from backing off. Jam nuts are sometimes used for leveling purposes as well.
Stainless Steels Material Grade :304, 304B, 309, 310, 316, 316B, 317, 317L, 321, 347, 401, 416, 430&501.Diameter:M27 to M64 up to 1200 MM in Length
Duplex & Super Duplex :UNS31803, S32750.
Diameter: M27 to M64 up to 1200 MM in Length
Hastelloy:HastelloyC-276, HastelloyC-22.
Diameter:M27 to M64 up to 1200 MM in Length
Exotics:904L, A-286, Alloy20, Alloy50, NitronicAlloys50, Titanium.
Diameter:M27 to M64 up to 1200 MM in Length
Nickel Alloys :Inconel600, 601, 625, 718, 750, 800/800H, 825, 925, Monel400, 405, K-500&Nickel200.
Diameter:M27 to M64 up to 1200 MM in Length
HIGH TENSILE Grade 8/10/12/2H
Real Fasteners (Real Fasteners)
Plot No.170 Road No 4 ,
GIDC Kathwada ,
Ahmedabad - 382430, Gujarat, India
Share us via
View Contact Number 
