Our Products
Calipers
2 Products availableDrilling Bits, Chucks & Collets
2 Products availableSensors
2 Products availableAutomotive Brakes
1 Products availableClutches
1 Products availableBrakes & Braking Systems
1 Products availableGearbox & Gear Parts
1 Products availableOur product range contains a wide range of ROTOGRIP MECHANICAL CHUCKS, TM MECHANICAL CHUCKS and mechanical chucks
| Pneumatic brakes with high heat dissipation. Available with 250 mm and 300 mm disks, they guarantee up to 1520 Nm of torque and 6 kW of available power. |
| The rotating heads exploit the reel movement in order to block and centre it; this system can be used to reduce damage to the cardboard cores so that they can be re-used. Available from 3 to 12. |
| Flange load cells, the most widely known and frequently used on converting machines, are available in a number of models, available loads range from 50 up to 25000 N. The output is available as a voltage in mV or a current 4 20 mA. CF represents the fastest and cheapest system for measuring and checking the tension of laminates. |
| The N series is supported by 2 carbon-graphite bearings, suitable for use with steam, water and diathermic oils at temperatures of up to 316C. The treated carbon-graphite is suitable for spherical sealing; the seal is perfect and maintenance is quick and easy. Available in sizes ranging from to 3. |
| Available in two versions, with feet or flange, and chuck (SVP/SVF series) or slide (SAP/SAF series) opening; maximum reel weight 1600 kg. Interchangeable inserts available in a range of shapes and sizes, including customers specifications. |
| The couplings are indispensable when it is necessary to use reels with cores that are a different size to those normally used for production. The couplings or adaptors can be used to adapt the existing shaft to the core of the reel to be processed (from 3 to 12) rather than produce a new expanding shaft. |
| Base load cells, ideal for heavy duty applications and high web tensions, such as paper machines, supercalenders and rolling mills. The available loads range from 150 to 30.000 N, the output is available as a voltage in mV or a current 4 20 mA. They are easy to use, even if the machine is already in use. |
OPTO-ELECTRONIC SENSOR TL.01
| It is able to read differences slights by detecting printed lines, contrasts and edges of printed material lines, even if these are discontinuous. This can be used on any surface, including transparent or metallic. Easy to install and there is no need for further adjustment in the exchange of the material. |
| Their small size means that it is possible to install one or more calliper in order to obtain the desired braking torque, there are two available versions; Positive for small and medium power braking or fast stop braking negative for safety and emergency braking. |
| Disc cluthes and brakes , with a modular calliper system, 0.75 to 4620 Nm of torque, and up to 15 kw of available poswer. These brakes are the ideal solution for large scale and high speed reels. |
| The U series is the most widely used version, supported by 2 ball bearings and available with graphite (for filtered air and water) or silicon carbide (for oil and water) seals. Available in one or two way versions and sizes ranging from to 2. |
| The SAF/SAP series is also available with axial deflection for more precise positioning on the reel. They have a travel of +/- 25 mm and can be supplied with fixtures that accept Re brakes. |
| Amplifiers for microprocessor controlled digital load cells, with a special HW/SW configuration that reduces signal processing time. They require a 24Vdc power supply, and feature cell inputs that can be set to mV or 4-20 mA, and digital and analogue outputs. |
| These actuators, which are applied during the reel unwinding and winding phases, perform rapid and precise movements, thanks to the use of a recirculating ball screw. The available modules permit stroke of between +/- 25 mm and +/- 100 mm and a maximum thrust of 3100 N at 48V. |
| Allow the edge reading of any kind of material these are perfectly interchangeable depending on the needs of the moment. The SU-M25 ultrasound version has a small size and a high degree of IP protection, which makes it suitable to use in dusty environments or in presence of liquids. |
| The R series is the most widely used solution for transferring the working pressure to pneumatic clutches and expanding shafts. Suitable for use at high speed, they rotate on two ball bearings. Available in sizes ranging from 1/8 to 1. |
| Expanding strip, keyed and shafts manufactured in aluminium or steel or Ergal. For applications where unwinding and rewinding must be perfectly concentric, the Centrimax model is capable of centring the material perfectly on the reel, thanks to the pneumo-mechanical control system. |
| Manually or pneumatically operated callipers (positive and negative), can be used to obtain high braking torque and are ideal for emergency braking on any machine used for processing material on reels. A cheap and simple solution, even for the most outdated machines. |
TM MECHANICAL CHUCKS
| These heads are available for diameters ranging from 3 to 12, in mono- and bidiametral versions. The monodiametral versions are available with a central hole for centring the reel, or a flange for ejecting the core. |
| The MX 16.3 chuck is equipped with a pneumo-mechanical mechanism. Using the air pressure, a cone expands the keys mechanically in order to lock the reel core in place. The chuck is small but robust and can support reels of up to 2000 Kg (the pair). The basic version is expandable and can be used with 70 and 3 cores. There are a number of mechanical adaptors available for larger cores, by simply inserting them on its body the MX 16 chuch can used to block 4, 5 and 6 cores. These chucks can be mounted on shaftless winders and unwinders. |
| The ELEFLEX series of electro-magnetic powder brakes range from the smallest B.121 to the largest B.5000. They can all be fitted with either a fan or a radiator and guarantee precise torque control. We have been manufacturing this reliable product for over 20 years and continue to develop new solutions in order to improve its performance, guaranteeing even lower residual torque for critical applications or where the working tensions are very low. Nominal torque from 12 Nm to 500 Nm. |
