We are offering turnkey crushing & screening plant. Turnkey crushing & screening plant is used for quarry, mining and recycling operations. Rd make available turnkey crushing & screening plant in different configurations in order to cater to variegated needs of the buyers.

rd primary jaw crushers are designed to crush very hard rock like granite, black basalt, river gravel, black trap rock, dolomite, limestone & iron ore, coal, etc. heat treated shafts forged of special alloy to handle overloads and hard materialsheavy duty self aligned spherical roller bearings absorbs and withstand extreme shocks, radial and thrust load and offer substantially more bearing lifemuch heavier, stronger, robust one piece frame, stress- relived for optimum reliabilitytoggle bearing wedges for easy in, easy out bearing replacementhardened barrel wear liners (side plate) protect the pitman (lever)replaceable fix & swing jaw plate made out high chrome & manganese percentageone piece cast pitman (lever) stands up to the most demanding crushing applicationslarger stroke, deeper crushing motion, steeper nip angle means higher capacity and greater throughput jaw crusher average capacity in tonshr. with jaw setting (closed settings) hp rpminches mm 1" 112" 2" 212" 3" 312" 4" 5" 6" 7" 8"25 38 50 63 75 90 100 125 150 175 20024"x12" 610x305 28 33 40 48 55 62 - - - - - 50 28024"x15" 600x 375 - 40 45 53 60 70 - - - - - 50 28030"x15" 762x 381 - - 50 63 70 80 90 - - - - 60 28030"x20" 762x500 - - - 68 72 80 88 - - - - 60 28036"x24" 914x610 - - - - 80 100 125 150 200 250 275 75 28042"x32" 1066x813 - - - - - 125 150 175 225 225 325 120 28042"x36" 1066x914 - - - - - 150 175 200 250 300 350 150 280 note: the output in tph indicated above is based on average hard dry quartz weighing at least 1.6 tonm3 when crushed and on continuous feed of graded sizes with fines removedcapacities may vary by 25 % depending on type of rock, gradation and method of the table, it is generally not economical to operate at such a setting

RD Engineering Industries portable crushing plant is designed based on the conception of fully adapting various crushing condition, eliminating obstacles caused by location, environment, foundation configuration, consequently providing simple, efficient, low-cost crushing equipment.

  The outstanding features of RD portable crushing plant are: Built with high quality jaw crusher, cone crusher and impact crusher Feeder, screen and belt conveyor on board Tractive steering shaft, convenient for road transportation Integrated with landing gears, quick and convenient installation on site Integrated motor and control panel   Easy to transport RD portable crushing plant has high on-board chassis, short wheel base and tight turning radius, which is convenient for road transportation, especially for driving to crushing sites that are difficult to access. The set-up time of the portable crushing plant are greatly reduced, compared with the stationary one.   Greatly reduce material transportation cost RDportable crushing plants crush the material on site, without transporting the materials for off-site crushing, so the material transportation cost is greatly reduced.   Wide applications According to different customers' requirements, RD portable crushing plant can be operated as independent units, or as two-stage crushing plant with primary and secondary crushing, or as three-stage crushing plant with primary, secondary, and tertiary crushing. Likewise, RD portable crushing plant can be easily adjusted to suit the crushing application by choosing feeding to crusher or feeding to screen options.   Reliable performance and convenient maintenance RDportable crushing plants adapt excellent quality crusher, screen and feeder made from RD Engineering Industries Company, yet the quality is stable and reliable. Normal belt conveyor can be used for conveyance of material, which is of mature technology, simply operation, easy maintenance, and low investment.   Customized production and flexible configuration We can provide special portable crushing plant based on customers' site, material, and particle shape requirements, etc. Such as self-load belt conveyor, multiple machines combined type, single machine type and so on.

  Capabilities INNOVATIVE CRUSHER DESIGNPRODUCES UNMATCHED PRODUCTION CAPACITY FLY WHEEL DESIGN REDUCE HORSE POWER REQUIREMENTS HYDRAULIC DUAL WEDGE SYSTEM DELIVERS QUICK CLOSED SIDE SETTING ADJUSTMENTS

LARGE FEED OPENING AND FORCE FEED ACTION FROM ECCENTRIC MOVEMENT OF SWING JAW INCREASES PRODUCTION CAPACITY

Whatever your crushing needs - from hard and abrasive rock to various recycling materials - you'll find the optimum solution with the "RD" Primary Jaw Crushers.

There are now two ranges of models in the "RD" brand Primary Jaw Crusher. The first is the well known traditional jaw crusher range that is designed for stationary as well as mobile applications (PJC 42"x36", 42"x32", 36"x24", 30"x20"). The second range is designed specifically to meet the needs of small to medium size Stationary and mobile crushing (PJC30"x15", 24"x15", 24"x12")

  Capabilities STRONG SIMPLE DESIGN DELIVERS MAXIMUM DURABILITY AND LONG LIFE. LARGE FLYWHEELS HAVE GREATER INERTIA FOR CRUSHING IN TOUGHEST APPLICATIONS. HYDRAULIC DUAL WEDGE SYSTEM DELIVERS QUICK CLOSED SIDE SETTING ADJUSTMENTS.

REVERSIBLE, REPLACEABLE, AND ADJUSTABLE WEAR PARTS REDUCE OPERATING COST.

MEETS COURSE AND FINE CRUSHING APPLICATION REQUIREMENTS  

RD Secondary Jaw Crushers are used for the secondary and tertiary crushing of any type of material, in particular hard and abrasive

Capabilities High reliability & convenient installation, use and maintenance. Diversiform parts can be chosen and key components of well-known international brands. Extensive range of model suitable for crushing and shaping of different materials.

Ability to control product grading, maximizing or minimizing fines production.

Perfectly economical & less cost of running and maintenance. Longer wear life of consumable component. Quick and easy installation. Adaptable and versatile.

RD ROR(I) series of vertical shaft impact crusher is not only used in extremely hard material, but also used in very different material properties of the artificial sand, pre-grinding of cement, mining, refractories and other industries, such as granite, basalt, limestone quartz stone, gnesis, cement clinker, concrete aggregates, ceramic raw materials, iron ore, gold, copper, corundum, bauxite silica, etc.

 

Customer gets from us qualitative Stone Crusher. With set vertical a jaws, where one jaw is fixed and other jaw moved back and forth with the aid of pitman mechanism. To crush the product effectively, the jaws are further made apart forming a tapered chute. Heavy flywheel that moves the shaft in a eccentric motion provides the energy to the crushing process.

 

Features:

 

• Made with qualitative material

• Fatigueless working

• Durable

• Reliable

• Effective crushed output

Capabilities Automation system offers a variety of control to adjust various production requirements. Advanced hydraulic technologies realize overload protection and hydraulic adjusting discharge opening. Adjustable stroke allows optimum crusher settings ensuring maximum yield of a required end product size.

Thin oil lubrication makes the service time increased.

Reliable hydraulic adjustment and security for protection. Ruggedization & easy maintenance. Lower wear part consumption and operation cost. Uniform finished product shape. Simple operation.

RD CC single cylinder hydraulic  cone crusher make a significant improvement based on regular cone crusher not only in its mechanical structure but also in the sense work i.e. speed throw and cavity design. In addition to high productivity, easy operation and maintenance of the distinguishing features, its greatest advantage is output of the stone products of good quality grain type (low content of needle Flake) and reducing production cost

We are offering turnkey crushing & screening plant. Turnkey crushing & screening plant is used for quarry, mining and recycling operations. Rd make available turnkey crushing & screening plant in different configurations in order to cater to variegated needs of the buyers.

rd primary jaw crushers are designed to crush very hard rock like granite, black basalt, river gravel, black trap rock, dolomite, limestone & iron ore, coal, etc. heat treated shafts forged of special alloy to handle overloads and hard materialsheavy duty self aligned spherical roller bearings absorbs and withstand extreme shocks, radial and thrust load and offer substantially more bearing lifemuch heavier, stronger, robust one piece frame, stress- relived for optimum reliabilitytoggle bearing wedges for easy in, easy out bearing replacementhardened barrel wear liners (side plate) protect the pitman (lever)replaceable fix & swing jaw plate made out high chrome & manganese percentageone piece cast pitman (lever) stands up to the most demanding crushing applicationslarger stroke, deeper crushing motion, steeper nip angle means higher capacity and greater throughput jaw crusher average capacity in tonshr. with jaw setting (closed settings) hp rpminches mm 1" 112" 2" 212" 3" 312" 4" 5" 6" 7" 8"25 38 50 63 75 90 100 125 150 175 20024"x12" 610x305 28 33 40 48 55 62 - - - - - 50 28024"x15" 600x 375 - 40 45 53 60 70 - - - - - 50 28030"x15" 762x 381 - - 50 63 70 80 90 - - - - 60 28030"x20" 762x500 - - - 68 72 80 88 - - - - 60 28036"x24" 914x610 - - - - 80 100 125 150 200 250 275 75 28042"x32" 1066x813 - - - - - 125 150 175 225 225 325 120 28042"x36" 1066x914 - - - - - 150 175 200 250 300 350 150 280 note: the output in tph indicated above is based on average hard dry quartz weighing at least 1.6 tonm3 when crushed and on continuous feed of graded sizes with fines removedcapacities may vary by 25 % depending on type of rock, gradation and method of the table, it is generally not economical to operate at such a setting

RD Engineering Industries portable crushing plant is designed based on the conception of fully adapting various crushing condition, eliminating obstacles caused by location, environment, foundation configuration, consequently providing simple, efficient, low-cost crushing equipment.

  The outstanding features of RD portable crushing plant are: Built with high quality jaw crusher, cone crusher and impact crusher Feeder, screen and belt conveyor on board Tractive steering shaft, convenient for road transportation Integrated with landing gears, quick and convenient installation on site Integrated motor and control panel   Easy to transport RD portable crushing plant has high on-board chassis, short wheel base and tight turning radius, which is convenient for road transportation, especially for driving to crushing sites that are difficult to access. The set-up time of the portable crushing plant are greatly reduced, compared with the stationary one.   Greatly reduce material transportation cost RDportable crushing plants crush the material on site, without transporting the materials for off-site crushing, so the material transportation cost is greatly reduced.   Wide applications According to different customers' requirements, RD portable crushing plant can be operated as independent units, or as two-stage crushing plant with primary and secondary crushing, or as three-stage crushing plant with primary, secondary, and tertiary crushing. Likewise, RD portable crushing plant can be easily adjusted to suit the crushing application by choosing feeding to crusher or feeding to screen options.   Reliable performance and convenient maintenance RDportable crushing plants adapt excellent quality crusher, screen and feeder made from RD Engineering Industries Company, yet the quality is stable and reliable. Normal belt conveyor can be used for conveyance of material, which is of mature technology, simply operation, easy maintenance, and low investment.   Customized production and flexible configuration We can provide special portable crushing plant based on customers' site, material, and particle shape requirements, etc. Such as self-load belt conveyor, multiple machines combined type, single machine type and so on.

  Capabilities INNOVATIVE CRUSHER DESIGNPRODUCES UNMATCHED PRODUCTION CAPACITY FLY WHEEL DESIGN REDUCE HORSE POWER REQUIREMENTS HYDRAULIC DUAL WEDGE SYSTEM DELIVERS QUICK CLOSED SIDE SETTING ADJUSTMENTS

LARGE FEED OPENING AND FORCE FEED ACTION FROM ECCENTRIC MOVEMENT OF SWING JAW INCREASES PRODUCTION CAPACITY

Whatever your crushing needs - from hard and abrasive rock to various recycling materials - you'll find the optimum solution with the "RD" Primary Jaw Crushers.

There are now two ranges of models in the "RD" brand Primary Jaw Crusher. The first is the well known traditional jaw crusher range that is designed for stationary as well as mobile applications (PJC 42"x36", 42"x32", 36"x24", 30"x20"). The second range is designed specifically to meet the needs of small to medium size Stationary and mobile crushing (PJC30"x15", 24"x15", 24"x12")

  Capabilities STRONG SIMPLE DESIGN DELIVERS MAXIMUM DURABILITY AND LONG LIFE. LARGE FLYWHEELS HAVE GREATER INERTIA FOR CRUSHING IN TOUGHEST APPLICATIONS. HYDRAULIC DUAL WEDGE SYSTEM DELIVERS QUICK CLOSED SIDE SETTING ADJUSTMENTS.

REVERSIBLE, REPLACEABLE, AND ADJUSTABLE WEAR PARTS REDUCE OPERATING COST.

MEETS COURSE AND FINE CRUSHING APPLICATION REQUIREMENTS  

RD Secondary Jaw Crushers are used for the secondary and tertiary crushing of any type of material, in particular hard and abrasive

Capabilities High reliability & convenient installation, use and maintenance. Diversiform parts can be chosen and key components of well-known international brands. Extensive range of model suitable for crushing and shaping of different materials.

Ability to control product grading, maximizing or minimizing fines production.

Perfectly economical & less cost of running and maintenance. Longer wear life of consumable component. Quick and easy installation. Adaptable and versatile.

RD ROR(I) series of vertical shaft impact crusher is not only used in extremely hard material, but also used in very different material properties of the artificial sand, pre-grinding of cement, mining, refractories and other industries, such as granite, basalt, limestone quartz stone, gnesis, cement clinker, concrete aggregates, ceramic raw materials, iron ore, gold, copper, corundum, bauxite silica, etc.

 

Customer gets from us qualitative Stone Crusher. With set vertical a jaws, where one jaw is fixed and other jaw moved back and forth with the aid of pitman mechanism. To crush the product effectively, the jaws are further made apart forming a tapered chute. Heavy flywheel that moves the shaft in a eccentric motion provides the energy to the crushing process.

 

Features:

 

• Made with qualitative material

• Fatigueless working

• Durable

• Reliable

• Effective crushed output

Capabilities Automation system offers a variety of control to adjust various production requirements. Advanced hydraulic technologies realize overload protection and hydraulic adjusting discharge opening. Adjustable stroke allows optimum crusher settings ensuring maximum yield of a required end product size.

Thin oil lubrication makes the service time increased.

Reliable hydraulic adjustment and security for protection. Ruggedization & easy maintenance. Lower wear part consumption and operation cost. Uniform finished product shape. Simple operation.

RD CC single cylinder hydraulic  cone crusher make a significant improvement based on regular cone crusher not only in its mechanical structure but also in the sense work i.e. speed throw and cavity design. In addition to high productivity, easy operation and maintenance of the distinguishing features, its greatest advantage is output of the stone products of good quality grain type (low content of needle Flake) and reducing production cost