RB Metrology

Kirti Nagar, Delhi

Assistance of warehouse management software helps in minimizing the efforts of the personnel and ensures the safe storage of the lot. Moreover, our experts keep a stringent check over the same. We firmly abide with our terms and agreements in regards of Payment and its Time Schedule. Our payment methods are practical and simple. We provide multiple payment options.

 

Coordinate measuring technology for production

• Temperature stability from +18ºC to +30ºC
• No compressed air required
• Space-saving design
• Integrated passive damping system
• Four-sided loading
• Completely covered guideways

 

ZEISS VAST XXT scanning sensor

• Scanning and single-point measuring
• CNC-guided stylus change
• 25 mm adapter plate for optimal reproducibility
• Axial stylus length: 30 to 150 mm
• Radial stylus length: 30 to 65 mm

 

Further components

• Numerical control panel with two progressive joysticks
• Stylus rack for CNC-guided stylus change

 

Shop Floor base

• Dust and moisture protection as per IP54
• Carrier arm for keyboard and monitor
• Lockable storage space for a PC
• Thermal shielding
• Movable with lifting truck or forklift

 

Optional accessories

• Automatic temperature reader with two workpiece sensors
• Rotary Table

 

High Temperature Gradient

• Deployable from +15ºC to +40ºC
• Enhanced insulating panels
• Extreme temperature stability
• Increased temperature range from +15º C to +40º C

 

Configuration : In the standard configuration (base, software and ­hardware), DuraMax HTG corresponds to the model with the Shop Floor base.

 

Available Software

• CALYPSO
• GEAR PRO
• PiWEB

Solutions

• IWC
• Robert Bosch
• TRW Automotive
• Volkswagen

We are capable of catering to buyers anywhere in Delhi(India) as well as any other place. We have resources to reach the buyers' Delhi(India) with ease. We keep the finished assortment of products in the highly developed and capacious storage unit. This helps us in keeping the products safe and sorted till the final dispatch.

 

Coordinate measuring technology for production

• Three-sided loading and operation
• Temperature stability from +15ºC to +40ºC
• Compact dimensions, large measuring space
• Moveable with a forklift
• Ram made of temperature-stable carbon-fiber
• Includes stylus rack with 4 slots
• Protective enclosure and safety technology

 

VAST navigator technology package

• Automatic generation of the ideal measuring strategy
• Tangential approach
• Helix scanning
• Dynamic stylus calibration

 

VAST performance kit

• FlyScan
• QuickChange

 

Temperature Variable Accuracy (TVA) : The accuracy of measuring machines is usually only given for the ideal temperature. Not with GageMax: thanks to the TVA formula, the accuracy of this system can be exactly determined for different temperatures.

 

Options

• Touchscreen – unaffected by oil and dirt
• Pneumatic stylus rack
• Illuminated measuring range
• Rotary table
• Reliable monitoring of the measuring process - choose one of two following options: Monitoring of the GageMax environment (default) or a protected measuring range (alternative)

 

Available Software

• CALYPSO
• GEAR PRO

Available Sensors

• VAST XT gold
• VAST XTR gold

Computerized Tensile Testing Machines :

• The Computerized Tensile Testing Machines we provide to the clients have vast range of Grips and attachments in them.

Some of their features are mentioned below :

• These Tensile Testers conform to the standards i.e. IS, BS, ASTM, DIN or ISO. They are now easily available for industries like Automotive, Textile, Paper, Steel, Food & Packaging, Aero Space, Defence, Wire & Cable Industries etc.
• The machines are entirely suitable for testing a wide range of materials such as rubbers, rexins, woods, plywood, plastics, ceramics, cardboard, latex, ferrous, composites, metals, non-ferrous metals and so on.
• Have various forms like round  and flat. Easily applicable for thread, ropes, wires, dumbbells, fabric, belts, strips, etc.
• The conduct variety of tests like Tension, Compression, Linear Bonding, Cross breaking, Bending, Shear tests, Gripping / Peeling strength of adhesives & tapes, etc.
• The special fixtures have been added in the machines so as to suit variety of material and shapes.

Important Notes :

• While receiving orders for the machines we take an extensive care to select the  machines which have proper features.
• The details which are appointed are capacity, traverse speeds, grip separation etc.
• We ensure that testing of the materials is in conformity with the standards followed-
• Hand Operated Cutting Press are of Size 150 X 150 mm.

Products More Details :

• Die overall length 50mm as per IS:34 Part I & II, IS:5831.
• Die overall length 75mm as per IS:3400 Part I, IS:434 PART I & II, IS:5831
• Die overall length 115mm as per IS:3400 Part I , IS:2414, IS:2415 & IS:443
• Die overall length 152mm as per IS:2076

The packaging commences strictly under the guidance of veteran experts and professionals, thus ensuring optimum packaging, keeping the products safe from various damaging factors. With meticulousness, hard work and commitment, our organization has developed in order to become a reputed trader in Delhi(India).

 

Coordinate measuring technology for production

• Machine design optimized for integration
• Temperature stability from +15ºC to +40ºC
• Pneumatic vibration insulation
• Robust machine design

 

Temperature Variable Accuracy (TVA) : The accuracy of measuring machines is usually only given for the ideal temperature. Not with CenterMax: thanks to the TVA formula, the accuracy of this system can be exactly determined for different temperatures.  

 

Navigator technology package

• Automatic generation of the ideal measuring strategy
• Tangential approach
• Helix scanning
• Dynamic stylus calibration

 

VAST Performance Kit

• FlyScan
• QuickChange

 

Options

• Touchscreen – unaffected by oil and dirt
• Pneumatic stylus rack
• Safety equipment
• Rotary table

 

Available Software

• CALYPSO
• GEAR PRO

Solutions

• Moventas
• Sandvik

Application :Universal testing machines have a wide range of applications. A number of materials & metals in different forms & shapes can be tested for a variety of tests like tension, compression, transverse, ben re-bend, 180º bend, shear, brinell, pullout, etc. Special attachments are also available for testing of flat belts, chain links, wire ropes, nut-bolts.

Special & Important Features :
 Front Open Crossheads : This is an important feature which facilitates insertion of tensile specimen from the front. This is extremely useful especially for heavy specimens and bigger capacity machines. In this type of machine the jaws and the inserts also can be easily removed by just pulling from the front. When the jaws and inserts are heavy, it is very difficult to remove them from the machine from upper or lower side. Hence this is an important feature from the point of view of easy operation.

 Hydraulic grips : Normally for standard Universal Testing Machines the jaw opening and specimen clamping is effected manually. But this becomes operator specific in this case. Hence it is a better choice to go for hydraulic operation of jaws (closing and opening). In this hydraulic griping method, separate double acting hydraulic cyclinder operate the jaws and the cyclinder operation is just by pressing a push button. So the operator has to operate the jaws and the cylinder operation is just by pressing a push button. So the operator has to operate only push buttons, which are conveniently located on the machine, to operate the jaws. A power pack with oil tank, pump, motor oil filler cum breather, oil level indicator, filter, relief valve is provided along with an electric motor to drive the hydraulic pump.

Application :

• These machines conduct a large number of materials and metals in their different forms and shapes. During the test the machines examine the processes like tension, compression, transverse, bend, shear, brinell Hardness etc.
• Some special attachments are available in these machines to test chain links, flat belts, wire ropes, etc.

Construction :

• Loading frame
• The base of the machine has a hydraulic cylinder at its center and two primary screws at both ends.
• Through main nuts the middle cross head is affixed on the screws.
• To adjust the initial tensile/compression clearance, the middle cross head can be moved up or down through geared motor and chain transmission.
• There is an assembly of upper, lower cross head in each machines. Additionally they have two columns on the same piston rests.
• The individual orbited cylinder of the piston assembly ensures smooth transfer of force with a minimum friction.

Hydraulic system :

• The Hydraulic circuit of machines consists of hydraulic power pack having a directly driven radial plunger pump. This pump gives an uninterrupting non pulsating flow of oil pressure that is up to 250 bar.
• On the power pack of this system, Oil filter, Oil strainer, Air breather, Oil level Indicator and Drain plug are provided for better convenience in the operation.
• To control the oil flow to cylinder a pressure compensated needle type flow control valve is rendered in the system, which achieves the desired piston speed.
• With the help of valves, the infinite variable speeds can be easily obtained.

Electrical System :

• In the electrical system of the machines a separate switch box and electrical panels are given.
• The hydraulic pump motor and the geared motor both have interlocks include in them.
• The Limit switches are provided in the system so as to stop the hydraulic pump motor if the load- increases beyond the machine capacity. These switches also help  if the piston stroke is exceeded.
• The machines have computerized control panels in them.

Load measuring system :

• The oil pressure in the main cylinder is transported to an electronic pressure transducer which provides a proportionate signal to the

Data Acquisition Unit :

• The push buttons controls the motors for hydraulic operation and cross head motion. They have interlocks in them to prevent simultaneous working of the Rotary Encoder.
• The encoder signal is fed to the Data Acquisition Panel so as to get displacement in mm.

Features of Data Acquisition Unit :

• A Micro-controller based data acquisition system is provided to attain the data acquisition & indication.
• They have 16 characters and * 2 lines LCD displays for displaying the load & cross head travel value.
• They also have an Auto-detector for over-load, over travel & specimen break. In the condition of these detections the machine is automatically switched off.
• The load is indicated with resolution of 0.01% of machine capacity for the total measurement range ( in other words with resolution of 0.04kN for TUE-C-400   Model)
• The Tare load & reset elongation facilities are available in this unit.
• The elongation is indicated with a resolution 0.1 mm.
• In order to store data, the storage space goes through 1 off-line test.

Features of  Win UTM Software :

• The Win UTM software can attempt a variety of mechanical tests. It can recall data from previous test & prepare the test reports.
• It has Menu driven software for the easiness in their usages.
• Through parallel port or USB Port, the test Reports & Graphs can be sent directly to the printer.
• It has storage & retrieval of the test parameters.
• It provides the display of load elongation (stress & strain are optional) at any clamant during the test.
• During the conduction of test, the software gives an on line display of load Vs elongation or Stress Vs Stain characteristics, the plot is auto scaled & displayed.
• It has selectable units (kN, kgf, mm, inch)
• It possess variable sample break detection.
• The load is indicated with a resolution of 0.01% of machine capacity for the complete measurement range of 2% to 100% of machine capacity.

Application :Universal Testing Machines have a wide range of applications. A number of materials and metals in different forms and shapes can be tested for a variety of testes like tension, compression, Transverse, Bend Shear, Brinell Hardness, etc. Special attachments are also available for testing of flat belts, chain links, wire ropes etc.

Construction :

• Load Frame : The base has a hydraulic cylinder at its center, and two main screws at both ends. The middle cross head is mounted on screws though main nuts. The middle cross head can be moved up or down through chain transmission and geared motor  to adjust he initial tensile / Compression clearance. On the piston rest an assembly ensures smooth transfer of force with minimum friction.
• Hydraulic system : Hydrualic circuit consist of hydraulic power pack having a directly driven radial plunger pump which gives a continuous non pulsating flow of oil  pressure upto 250 bar. Oil filter, Oil strainer, Air breather, Oil level Indicator, Drain plug a provided on the power pack. A pressure compensated needle type flow control valve, is provided to control the oil flow by cylinder thereby achieving desired piston speed . Infinitely variable speeds can be obtained with the help of valves.
• Electrical System : A separate switch box and electrical panels are provided. Both the hydraulic pump motor and the geared motor have interlocks. Limit switches are provided to stop the hydraulic pump motor if the load increases beyond the machine capacity of if the piston stroke is exceeded.

As a promising name, we bring forth high quality product range that is designed and developed using the best in class raw material and modern work methodologies. Besides, we make sure that the basic material is sourced from the trusted places. Our company guarantees to make delivery of bulk as well as retail orders of the product within the mutually decided timeframe.

Analogue Cum Computerised Universal Testing Machines Features :

• The DC valve is provided which directs oil flow either to analogue or computerized control panel. One can use one system at a time.
• Both Analogue & Computerized control panel is provided

Located in Delhi(India), we are a reliable entity when it comes to quality centralized and cost effective products. Our complete range of product is wrapped in strong, nontoxic, and superior-grade packs that protect the contents inside from damage, moisture, logistic movement, etc. Furthermore, the packaging has product details printed on it.